• Title/Summary/Keyword: High Strain

Search Result 4,989, Processing Time 0.031 seconds

Optimization for Underwater Welding of Marine Steel Plates (선박용 강판의 수중 용접 최적화에 관한 연구)

  • 오세규
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.20 no.1
    • /
    • pp.49-59
    • /
    • 1984
  • Optimizing investigation of characteristics of underwater welding by a gravity type arc welding process was experimentally carried out by using six types of domestic coated welding electrodes for welding of domestic marine structural steel plates (KR Grade A-1, SWS41A, SWS41B,) in order to develop the underwater welding techniques in practical use. Main results obtained are summarized as follows: 1. The absorption speed of the coating of domestic coated lime titania type welding-electrode became constant at about 60 minutes in water and it was about 0.18%/min during initial 8 minutes of absorption time. 2. Thus, the immediate welding electrode could be used in underwater welding for such a short time in comparison with the joint strength of in-atmosphere-and on-water-welding by dry-, wet-or immediate-welding-electrode. 3. By bead appearance and X-ray inspection, ilmenite, limetitania and high titanium oxide types of electrodes were found better for underwater-welding of 10 mm KR Grade A-1 steel plates, while proper welding angle, current and electrode diameter were 6$0^{\circ}C$, above 160A and 4mm respectively under 28cm/min of welding speed. 4. The weld metal tensile strength or proof stress of underwater-welded-joints has a quadratic relationship with the heat input, and the optimal heat input zone is about 13 to 15KJ/cm for 10mm SWS41A steel plates, resulting from consideration upon both joint efficiency of above-100% and recovery of impact strength and strain. Meanwhile, the optimal heat input zone resulting from tension-tension fatigue limit above the base metal's of SWS41A plates is 16 to 19KJ/cm. Reliability of all the empirical equations reveals 95% confidence level. 6. The microstructure of the underwater welds of SES41A welded in such a zone has no weld defects such as hydrogen brittleness with supreme high hardness, since the HAZ-bond boundary area adjacent to both surface and base metal has only Hv400 max with the microstructure of fine martensite, bainite, pearlite and small amount of ferrite.

  • PDF

Fibrinolytic Activity and Antioxidant Effects of the Newly Developed Agabean Fermented of Product Produced by Bacillus sp. (Bacillus sp.에 의하여 발효된 신품종 아가콩 발효 산물의 혈전 용해 활성 및 항산화 효과)

  • Kim, Sung-Ryeal;Kim, Min-Jeong;Lee, Hye-Hyeon;Seo, Min-Jeong;Kang, Byoung-Won;Joo, Woo-Hong;Park, Jeong-Uck;Rhu, Eun-Ju;Hwang, Young-Hyun;Jeong, Yong-Kee
    • Journal of Life Science
    • /
    • v.20 no.11
    • /
    • pp.1711-1717
    • /
    • 2010
  • In this study, fibrinolytic activities of fermented yellow agabean (FYA) and black agabean (FBA), and the antioxidation efficiencies of 70% ethanol extract of fermented yellow agabean (FYAE) and black agabean (FBAE) were investigated by selecting Bacillus sp. sm26 strain. Fibrinolytic activities of FYA and FBA were $6.38{\pm}0.5$ and $6.83{\pm}0.5\;U/ml$, which were 1.3 and 1.4 times higher than that of FSB, respectively. With regard to total phenolic contents, FYAE and FBAE were $3.40{\pm}0.44\;mg/g$ and $2.45{\pm}0.20\;mg/g$ respectively, suggesting that their contents were about twice as high as that of fermented soybean extract (FSBE) used as a control. In comparison with FSBE, total protein and sugar contents of FYAE were $0.56{\pm}0.11$ and $2.41{\pm}0.48\;mg/g$, respectively, and those of FBAE were $0.39{\pm}0.12$ and $2.72{\pm}0.63\;mg/g$, respectively. This result suggests that FYAE was 4.7 and 1.7 times higher than FSBE, respectively. The DPPH radical scavenging activity of FBAE was 79% at 1 mg/ml, which was highest among the fermented bean extracts, and was twice as high as FSBE in regards to activity. In addition, FBAE exhibited the highest reducing power at 1 mg/ml, which was higher than FSBE by two-fold. With regard to lipid peroxidation, FBAE and FYAE were 93% and 80% at 1 mg/ml, which were 3 and 2.5 times higher than FSBE, respectively. Of note, the hydrogen peroxide scavenging activities of FBAE and FYAE were 82% and 54% at 1 mg/ml, offering activity that was 4 and 2.5 times higher than FSBE, respectively. Based on these results, the fibrinolytic activity and antioxidation efficiency of the fermented agabeans were significantly higher than other soybeans. Therefore, these studies may suggest that the functional agabeans can be a potential candidate for a natural functional food.

Finite Element Analysis of Bone Stress Caused by Horizontal Misfit of Implant Supported Three-Unit Fixed Prosthodontics (3차원 유한요소법에 의한 임플란트 지지 3본 고정성 가공 의치의 부적합도가 인접골 응력에 미치는 영향 분석)

  • Lee, Seung-Hwan;Jo, Kwang-Hun
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.28 no.2
    • /
    • pp.147-161
    • /
    • 2012
  • This study is to assess the effect of horizontal misfit of an implant supported 3-unit fixed prosthodontics on the stress development at the marginal cortical bone surrounding implant neck. Two finite element models consisting of a three unit fixed prosthodontics and an implant/bone complex were constructed on a three dimensional basis. The three unit fixed prosthodontics were designed either shorter (d=17.8mm model) or longer (d=18.0mm model) by 0.1mm than the span of two implants placed at the mandibular second premolar and second molar areas 17.9mm apart. Fitting of the fixed prosthodontics onto the implant abutments was simulated by a total of 6 steps, that is to say, 0.1mm displacement per each step, using DEFORM 3D (ver 6.1, SFTC, Columbus, OH, USA) program. Stresses in the fixed prosthodontics and implants were evaluated using von-Mises stress, maximum compressive stress, and radial stress as necessary. The d=17.8mm model assembled successfully on to the implant abutments while d=18.0mm model did not. Regardless if the fixed prosthodontics fitted onto the abutments or not, excessively higher stresses developed during the course of assembly trial and thereafter. On the marginal cortical bone around implants during the assembly, the peak tensile and compressive stresses were as high as 186.9MPa and 114.1MPa, respectively, even after the final sitting of the fixed prosthodontics (for d=17.8mm model). For this case, the area of marginal bone subject to compressive stresses above 55MPa, equivalent of the $4,000{\mu}{\varepsilon}$, i.e. the reported threshold strain to inhibit physiological remodeling of human cortical bone, extended up to 2mm away from implant during the assembly. Horizontal misfit of 0.1mm can produce excessively high stresses on the marginal cortical bone not only during the fixed prosthodontics assembly but also thereafter.

Gel and Texture Properties of Fish-meat Gel Prepared with Pagrus major in Comparison to Different Grades of Alaska Pollock (도미를 활용하여 제조한 연제품의 겔 및 texture 특성)

  • Gao, Ya;Oh, Jung Hwan;Karadeniz, Fatih;Lee, Seul-Gi;Kim, Hyung Kwang;Kim, Se Jong;Jung, Jun Mo;Cheon, Ji Hyeon;Kong, Chang-Suk
    • Journal of Life Science
    • /
    • v.26 no.8
    • /
    • pp.955-962
    • /
    • 2016
  • Fish-meat gel is an intermediate product used in a variety of surimi-based seafood. One of the most-used raw materials of fish-meat gel is Alaska Pollock due to its high-quality meat in terms of gel strength and texture. However, increasing demand for fish-meat gel, along with overexploitation of the wild catch Alaska Pollock, has put the industry in need of low-cost sustainable alternative sources for fish-meat gel. Pagrus major (PM) is a widely aquacultured fish known for having white meat that is low in fat. The current study compares the quality of fish-meat gel prepared from aquacultured PM to that of high and mid-grade Alaska Pollock fish-meat gel. Gels were compared in terms of gel strength, texture, color, and protein pattern. Results indicated that fish-meat gels prepared from PM were superior to Alaska Pollock fish-meat gels with regard to gel strength, hardness, springiness, chewiness, cutting strength, and breaking force. In addition, although not matching in quality, PM exhibited a cohesiveness, whiteness, and expressible moisture content comparable to Alaska Pollock of both grades. Protein pattern analysis also showed that PM and Alaska Pollock fish-meat gels had similar protein profiles before and after gel preparation. Therefore, P. major is suggested as a potential substitute for Alaska Pollock in fish-meat gel production.

Development of Marker-free Transgenic Rice Expressing the Wheat Storage Protein, Glu-1Dy10, for Increasing Quality Processing of Bread and Noodles (빵과 면의 가공적성 증진을 위한 밀 저장단백질 Glu-1Dy10을 발현하는 마커프리 형질전환 벼 개발)

  • Park, Soo-Kwon;Shin, DongJin;Hwang, Woon-Ha;Hur, Yeon-Jae;Kim, Tae-Heon;Oh, Se-Yun;Cho, Jun-Hyun;Han, Sang-Ik;Lee, Seung-Sik;Nam, Min-Hee;Park, Dong-Soo
    • Journal of Life Science
    • /
    • v.24 no.6
    • /
    • pp.618-625
    • /
    • 2014
  • Rice flour is used in many food products. However, dough made from rice lacks extensibility and elasticity, making it less suitable than wheat for many food products such as bread and noodles. The high-molecular weight glutenin subunits (HMW-GS) of wheat play a crucial role in determining the processing properties of the wheat grain. This paper describes the development of marker-free transgenic rice plants expressing a wheat Glu-Dy10 gene encoding the HMG-GS from the Korean wheat cultivar 'Jokyeong' using Agrobacterium-mediated co-transformation. Two expression cassettes, consisting of separate DNA fragments containing Glu-1Dy10 and hygromycin phosphotransferase II (HPTII) resistance genes, were introduced separately into Agrobacterium tumefaciens EHA105 for co-infection. Each EHA105 strain harboring Glu-1Dy10 or HPTII was infected into rice calli at a 3: 1 ratio of Glu-1Bx7 and HPTII. Among 290 hygromycin-resistant $T_0$ plants, we obtained 29 transgenic lines with both the Glu-1Dy10 and HPTII genes inserted into the rice genome. We reconfirmed the integration of the Glu-1Dy10 gene into the rice genome by Southern blot analysis. Transcripts and proteins of the Glu-1Dy10 in transgenic rice seeds were examined by semi-quantitative RT-PCR and Western blot analysis. The marker-free plants containing only the Glu-1Dy10 gene were successfully screened in the $T_1$ generation.

Incidence of Escherichia coli and Its Susceptibility to Antimicrobials in Childhood Urinary Tract Infection (소아 요로감염에서 Escherichia coli의 빈도와 항생제 감수성에 대한 연구)

  • Chi Hye-Mi;Kwahk Jae-Hyok;Lee Jun-Ho;Park Hye-Won
    • Childhood Kidney Diseases
    • /
    • v.10 no.1
    • /
    • pp.18-26
    • /
    • 2006
  • Purpose : Empirical antimicrobial treatment is indicated before bacteriological results are available for young children with febrile UTI to minimize renal scarring. To ensure appropriate therapy, knowledge of the prevalence of causative organisms and their susceptibility patterns to antimicrobials is mandatory. We performed a retrospective analysis investigating the local prevalence and resistance patterns of uropathogens, primarily E. coli, isolated from community-acquired UTIs. Methods : A total of 103 positive urine cultures from children with febrile UTI collected at Bundang CHA General Hospital from February 2004 to February 2005 were analyzed. Inclusion criteria were fever higher than $37.5^{\circ}C$, significant bacteriuria with single strain growth of at least 10s colony forming units/mL urine, and leukocyturia >5/HPF. Results : E. coli(89.3%) was the leading uropathogen followed by Enterococcus spp.(3.9%) Klebsiella spp.(2.9%), Citrobctcter spp.(1.9%) and Enterobacter spp.(1.9%). E. coli strains revealed a low proportion of antimicrobial susceptibility to ampicillin(AMP; 27.2%) ampicillinsulbactam(AMS; 34.8%) and trimethoprim-sulfamethoxazole(SXT; 65.2%). Susceptibility patterns to cephalosporins were as follows; cefazolin(1st generation; 91.3%), cefoxitin(2nd; 100%), ceftriaxone(3rd; 97.8%) and cefepime(4th; 97.8%). Three E. coli isolates produced ex tended - spectrum beta-lactamase(ESBL). Conclusion : Empirical treatment with AMP, AMS and SXT, which are commonly used in pediatric clinics, is not recommended for childhood UTI due to high incidence of resistance. The high level of susceptibility to cephalosporins makes these drugs reasonable alternatives. However the emergence of ESBL-producers, even though they are quite few, may have an impact on cephalosporin treatment in the future. (J Korean Soc Pediatr Nephrol 2006;10:18-26)

  • PDF

A New Vegetable Soybean Cultivar, 'Sangwon' with Early Maturity and High Yield (풋콩용 조숙 다수성 신품종 '상원')

  • Ko, Jong-Min;Baek, In-Youl;Han, Won-Young;Kim, Hyun-Tae;Oh, Ki-Won;Shin, Sang-Ouk;Park, Keum-Yong;Ha, Tae-Jung;Shin, Doo-Chull;Chung, Myung-Geun;Kang, Sung-Taek;Yun, Hong-Tae;Oh, Young-Jin;Lee, Jong-Hyung;Son, Chang-Ki;Kim, Yong-Deuk
    • Korean Journal of Breeding Science
    • /
    • v.42 no.6
    • /
    • pp.684-689
    • /
    • 2010
  • 'Sangwon', a new cultivar for vegetable soybean, was developed from the cross between 'Keunolkong' and 'Oshimamidori', and was released at the National Institute of Crop Science (NICS) in 2007. The goal to develop a vegetable soybean cultivar with green pod, early maturity, large seed size, high yield, lodging tolerance, and resistance to disease such as soybean mosaic virus (SMV). 'Sangwon' has light green pod, early maturity, large seed, short plant height, and lodging tolerance. 'Sangwon' has determinate growth habit, white flower, gray pubescence, and oval leaf shape. The matured seeds have a yellow seed coat with light brown hilum, and a yellow cotyledon. 'Sangwon' has 5.8 cm fresh pod length, 13.2mm fresh pod width, 69.5 g seed weight per 100 green seeds, 44.0% green seed protein content, and 14.8% green seed oil content. At the regional yield trials (RYT) for vegetable soybean from 2005 to 2007, 'Sangwon' shows strong resistance to soybean mosaic virus (SMV) and tolerance to lodging in fields. Fresh pods of 'Sangwon' were harvested at the beginning of August. In the same tests, fresh pod of 'Sangwon' (10.39ton/ha) yielded 5% higher than 'Hwaeomputkong' (9.90ton/ha).

Comparison of Substance Change and Antibacterial Activity Before and After Fermentation Using Resource Plants for The Development of Natural Preservatives (천연방부제 개발을 위한 자원식물을 활용한 발효 전·후 물질 변화와 항균활성 비교)

  • Seo A Jung;Youn Ok Jung;Ga Hyeon Song;No Bok Park
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.25 no.1
    • /
    • pp.20-35
    • /
    • 2023
  • Chemical preservatives have a good effect on antibacterial activity, but many side effects on the human body have been reported. Recently, the development of natural preservatives that are harmless to the human body and have preservative functions and self-efficacy is active. In addition, in order to increase the absorption rate of natural products by the human body, the method of fermentation using strains is also increasing. Therefore, this study selected varieties that are harmless to the human body and have good antibacterial activity. 1. The yield of origin, thickness and solvent was investigated. Scutellaria baicalensis Georgi was made in China and received a yield of 21.88% from 50% ethyl alcohol extract. Salvia miltiorrhiza Bunge was made in Korea and received a yield of 25.62% from 50% ethyl alcohol extract. Dryopteris crassirhizoma Nakai was made in China and received a yield of 6.50% from 70% ethyl alcohol extract. 2. The solid fermentation with the S. baicalensis and S. miltiorrhiza with B. Subtilis yield gained 24.40%, 39.30%, and D. crassirhizoma obtained 11.10% yield when fermented with L. casei. 3. After the liquid fermentation, a clear zone of 9mm was identified for the S. aureus strain in the S. baicalensis, and the antibacterial activity was not confirmed in S. miltiorrhiza and D. crassirhizoma. 4. When the S. baicalensis was fermented with L. Casei, it showed high antibacterial activity in C. albicans and S. aureus. S. miltiorrhiza showed antibacterial activity in S. aureus when it was solid with S. cerevisiae. When the spectators were solid with L. casei and S. cerevisiae, antibacterial activity was high in E. coli and S. aureus. Overall, the antibacterial activity after fermentation was much higher than when fermented. 5. The change in active ingredients was baicalin 101.57, baicalein 28.26, and wogonin 5.33mg/g in the S. baicalensis that did not ferment solid. When solid fermentation with S. cerevisiae, the content of baicalinin with baicalin 94.31, baicalein 30.41, and wogonin 3.57mg/g was found to have increased. S. miltiorrhiza that was not fermented, salvianolic acid A was 1.82mg/g, and when fermented with S. cerevisiae, it increased to 5.70mg/g. The active ingredients of the spectators were flavaspidic acid AP, flavaspidic acid PB, flavaspidic acid AB, and flavaspidic acid BB.

Pharmacological Studies of Cefoperazone(T-1551) (Cefoperazone(T-1551)의 약리학적 연구)

  • Lim J.K.;Hong S.A.;Park C.W.;Kim M.S.;Suh Y.H.;Shin S.G.;Kim Y.S.;Kim H.W.;Lee J.S.;Chang K.C.;Lee S.K.;Chang K.C.;Kim I.S.
    • The Korean Journal of Pharmacology
    • /
    • v.16 no.2 s.27
    • /
    • pp.55-70
    • /
    • 1980
  • The pharmacological and microbiological studies of Cefoperazone (T-1551, Toyama Chemical Co., Japan) were conducted in vitro and in vivo. The studies included stability and physicochemical characteristics, antimicrobial activity, animal and human pharmacokinetics, animal pharmacodynamics and safety evaluation of Cefoperazone sodium for injection. 1) Stability and physicochemical characteristics. Sodium salt of cefoperazone for injection had a general appearance of white crystalline powder which contained 0.5% water, and of which melting point was $187.2^{\circ}C$. The pH's of 10% and 25% aqueous solutions were 5.03 ana 5.16 at $25^{\circ}C$. The preparations of cefoperazone did not contain any pyrogenic substances and did not liberate histamine in cats. The drug was highly compatible with common infusion solutions including 5% Dextrose solution and no significant potency decrease was observed in 5 hours after mixing. Powdered cefoperazone sodium contained in hermetically sealed and ligt-shielded container was highly stable at $4^circ}C{\sim}37^{\circ}C$ for 12 weeks. When stored at $4^{\circ}C$ the potency was retained almost completely for up to one year. 2) Antimicrobial activity against clinical isolates. Among the 230 clinical isolates included, Salmonella typhi was the most susceptible to cefoperazone, with 100% inhibition at MIC of ${\leq}0.5{\mu}g/ml$. Cefoperazone was also highly active against Streptococcus pyogenes(group A), Kletsiella pneumoniae, Staphylococcus aureus and Shigella flexneri, with 100% inhibition at $16{\mu}g/ml$ or less. More than 80% of Escherichia coli, Enterobacter aerogenes and Salmonella paratyphi was inhibited at ${\leq}16{\mu}/ml$, while Enterobacter cloaceae, Serratia marcescens and Pseudomonas aerogenosa were somewhat less sensitive to cefoperagone, with inhibitions of 60%, 55% and 35% respectively at the same MIC. 3) Animal pharmacokinetics Serum concentration, organ distritution and excretion of cefoperazone in rats were observed after single intramuscular injections at doses of 20 mg/kg and 50 mg/kg. The extent of protein binding to human plasma protein was also measured in vitro br equilibrium dialysis method. The mean Peak serum concentrations of $7.4{\mu}g/ml$ and $16.4{\mu}/ml$ were obtained at 30 min. after administration of cefoperazone at doses of 20 mg/kg and 50 mg/kg respectively. The tissue concentrations of cefoperazone measured at 30 and 60 min. were highest in kidney. And the concentrations of the drug in kidney, liver and small intestine were much higher than in blood. Urinary and fecal excretion over 24 hours after injetcion ranged form 12.5% to 15.0% in urine and from 19.6% to 25.0% in feces, indicating that the gastrointestinal system is more important than renal system for the excretion of cefoperazone. The extent of binding to human plasma protein measured by equilibrium dialysis was $76.3%{\sim}76.9%$, which was somewhat lower than the others utilizing centrifugal ultrafiltration method. 4) Animal pharmacodynamics Central nervous system : Effects of cefoperazone on the spontaneous movement and general behavioral patterns of rats, the pentobarbital sleeping time in mice and the body temperature in rabbits were observed. Single intraperitoneal injections at doses of $500{\sim}2,000mg/kg$ in rats did not affect the spontaneous movement ana the general behavioral patterns of the animal. Doses of $125{\sim}500mg/kg$ of cefoperazone injected intraperitonealy in mice neither increased nor decreased the pentobarbital-induced sleeping time. In rabbits the normal body temperature was maintained following the single intravenous injections of $125{\sim}2,000mg/kg$ dose. Respiratory and circulatory system: Respiration rate, blood pressure, heart rate and ECG of anesthetized rabbits were monitored for 3 hours following single intravenous injections of cefoperazone at doses of $125{\sim}2,000mg/kg$. The respiration rate decreased by $3{\sim}l7%$ at all the doses of cefoperazone administered. Blood pressure did not show any changes but slight decrease from 130/113 to 125/107 by the highest dose(2,000 mg/kg) injected in this experiment. The dosages of 1,000 and 2,000 mg/kg seemed to slightly decrease the heart rate, but it was not significantly different from the normal control. All the doses of cefoperazone injected were not associated with any abnormal changes in ECG findings throughout the monitering period. Autonomic nervous system and smooth muscle: Effects of cefoperazone on the automatic movement of rabbit isolated small intestine, large intestine, stomach and uterus were observed in vitro. The autonomic movement and tonus of intestinal smooth muscle increased at dose of $40{\mu}g/ml$ in small intestine and at 0.4 mg/ml in large intestine. However, in stomach and uterine smooth muscle the autonomic movement was slightly increased by the much higher doses of 5-10 mg/ml. Blood: In vitro osmotic fragility of rabbit RBC suspension was not affected by cefoperazone of $1{\sim}10mg/ml$. Doses of 7.5 and 10 mg/ml were associated with 11.8% and 15.3% prolongation of whole blood coagulation time. Liver and kidney function: When measured at 3 hours after single intravenous injections of cefoperaonze in rabbits, the values of serum GOT, GPT, Bilirubin, TTT, BUN and creatine were not significantly different from the normal control. 5) Safety evaluation Acute toxicity: The acute toxicity of cefoperazone was studied following intraperitoneal and intravenous injections to mice(A strain, 4 week old) and rats(Sprague-Dawler, 6 week old). The LD_(50)'s of intraperitonealy injected cefoperazone were 9.7g/kg in male mice, 9.6g/kg in female mice and over 15g/kg in both male and female rats. And when administered intravenously in rats, LD_(50)'s were 5.1g/kg in male and 5.0g/kg in female. Administrations of the high doses of the drug were associated with slight inhibition of spontaneous movement and convulsion. Atdominal transudate and intestinal hyperemia were observed in animals administered intraperitonealy. In rats receiving high doses of the drug intravenously rhinorrhea and pulmonary congestion and edema were also observed. Renal proximal tubular epithelial degeneration was found in animals dosing in high concentrations of cefoperazone. Subacute toxicity: Rats(Sprague-Dawley, 6 week old) dosing 0.5, 1.0 and 2.0 g/kg/day of cefoperazone intraperitonealy were observed for one month and sacrificed at 24 hours after the last dose. In animals with a high dose, slight inhibition of spontaneous movement was observed during the experimental period. Soft stool or diarrhea appeared at first or second week of the administration in rats receiving 2.0g/kg. Daily food consumption and weekly weight gain were similar to control during the administration. Urinalysis, blood chemistry and hematology after one month administration were not different from control either. Cecal enlargement, which is an expected effect of broad spectrum antibiotic altering the normal intestinal microbial flora, was observed. Intestinal or peritoneal congestion and peritonitis were found. These findings seemed to be attributed to the local irritation following prolonged intraperitoneal injections of hypertonic and acidic cefoperazone solution. Among the histopathologic findings renal proximal tubular epithelial degeneration was characteristic in rats receiving 1 and 2g/kg/day, which were 10 and 20 times higher than the maximal clinical dose (100 mg/kg) of the drug. 6) Human pharmacokinetics Serum concentrations and urinary excretion were determined following a single intravenous injection of 1g cefoperazone in eight healthy, male volunteers. Mean serum concentrations of 89.3, 61.3, 26.6, 12.3, 2.3, and $1.8{\mu}g/ml$ occured at 1,2,4,6,8 and 12 hours after injection respectively, and the biological half-life was 108 minutes. Urinary excretion over 24 hours after injection was up to 43.5% of administered dose.

  • PDF

Mechanical and Operational Factors Affecting the Efficiency of Rice Polishing Machines (정미기의 능률에 미치는 기계적 요인및 작동조건에 관한 연구)

  • No, Sang-Ha
    • Journal of Biosystems Engineering
    • /
    • v.1 no.1
    • /
    • pp.15-15
    • /
    • 1976
  • In analyzing the operational characteristics of a rice whitening machine, the internal radial pressure of the machine was measured using strain gage equipment. Changes in cylinder and feed screw configurations, screen type, cylinder speed and counter-pressure levels were examined to determine their impact on the quality and quantity of milled rice and the performance of the machine. The results are summarized as follows: 1. The internal radial pressure in the whitening chamber varied with the surface condition of the grain being processed. During the first or second pass through the machine, pressure was relatively low, reached a maximum after two to three passes with combinations I and II, three to six with combination III and then began to fall. 2. The pitch of the feed screw and the size of the feed gate opening which determine the rate of entry of grain into the whitening chamber, appeared to be the most important factor aff-::cting the degree of radial pressure, quality and quantity of milled rice and the efficiency of the machine. Using a feed screw with a wide pitch (4.8cm), radial pressure was relatively high and head rice recovery ratio \vere quite low. In this case capacity and machine effic?iency were much higher than obtained when using a feed screw with a narrow pitch (2.3cm). Very significant responses in radial pressure, head rice recovery rates and machine capacity were observed with changes in cylinder speed and counter-pressure levels when using the wide pitch feed screw. 3. The characteristics of the screen which surrounds the whitening chamber had an important effect on whitening efficiency. The existence of small protuberances on the original screen resulted in significant increases in both machine capacity and efficiency but without a significant decrease in head rice recovery or development of excessive radial pressure. Further work is required to determine the effects of screen surface conditions and the shape of the cylinderical steel roller on the rate of bran removal, machine efficiency and recovery rates. The size of the slotted perforations 0:1 the screen affects total milled rice recovery. The opening size on the original screen was fabricated to accommodate the round shape of Japonica rice varieties but was not suitable for the more slender Indica type. Milling Indica varieties with this screen resulted in a reduction in total milled rice recovery. 4. An increase in cylinder speed from 380 to 820 rpm produced a positive effect on head rice recovery for all machine combinations at every level of counter-pressure used in the tests. Head rice recovery was considerably lower at 380rpm using a wide screw pitch when compared to the results obtained at speeds from 600 to 820 r.p.m. The effects of cylinder speed On radial pressure, capacity and machine efficiency showed contrasting results, depending on the width of the feed screw pitch. With a narrow feed screw pitch (2.3cm), a direct proportional relationship was observed bet?ween cylinder speed and both radial pressure and machine efficiency. In contrast, using a 4.8 centimeter pitch feed roller produced a series of inverse relationships between the above variables. Based on the results of this study it is recommended when milling Indica type long grain rice varieties that the cylinder speed of the original machine be increased from 500-600 rmp up to a minimum of 800 rpm to obtain a greater abrasive effect between the grain and the screen. The pitch of the feed screw should be also reduced to decr?ease the level of internal radial pressure and to obtain higher machine efficiency and increased quality of milled rice with increased cylinder speeds. Further study on the interaction between cylinder speed and feed screw pitch is recommended. 5. An increase in the counter pressure level produced a negative effect On the head rice recovery with an increase in radial pressure, capacity, and machine efficiency over all combinations and at every level of cylinder speed. 6. Head rice recovery rates were conditioned primarily by the pressure inside the whitening chamber. According to the empirical cha racteristics curve developed in this study, the relationships of head rice recovery ($Y_h$) and machine capacity ($Y_c$/TEX>) to internal radial pressure ($X_p$) followed an inverse quadratic function and a linear function respectively: $$Y_h^\Delta=\frac{1}{{1.4383-0.2951X_p^\ast+0.1425X_p^{\ast\ast}}^2} , (R^2=0.98)$$$$Y_c^\Delta=-305.83+374.37X_p^{\ast\ast}, (R^2=0.88)$$The correlation between capacity and power consumption per unit of brown rice expressed in the following exponential function: $$Y_c^\Delta=1.63Y_c^{-0.7786^\{\ast\ast}, (R^2=0.94)$$These relationships indicate that when radial pressure increases above a certain range (1. 6 to 2.0 kg/$cm^2$ based On the results of the experiment) head ricerecovery decrea?ses in a quadratic relation with a inear increase in capacity but without any decrease in power consump tion per unit of brown rice. On the other hand, if radial pressure is below the range shown above, power consumption increases dramatically with a lin?ear decrease in capacity but without significant increases in head rice recovery. During the operation of a given whitening machine, the optimum radial pressure range or the correct capacity range should be selected by controlling the feed rate and/or counter-pressure keeping in mind the condition of the grain, particulary the hardness. It was observed that the total number of passes is related to radial pessure level, feed rate and counter-pressure level. The higher theradial pressure the fewer num?ber of pass required but with decreased head rice recovery. In particular, when using high feed rates, the total number of passes should be increased to more than three by reducing the counter-pressure level to avoid decreaseases in head rice recovery (less than 65 percent head rice recovery on the basis of brown rice) at every cylinder speed. 7. A rapid rise in grain temperature seemed to have a close relationship with the pressure generated inside the whitening chamber and, subsequently with head rice reco?very rates. The higher the rate of increase, the lower were the resulting head rice recoveries.