• 한국철도학회논문집
• /
• 제15권2호
• /
• pp.129-134
• /
• 2012

NPC 멀티레벨 인버터는 2-레벨 인버터 방식에 비해 전력용 반도체 소자의 정격 전압과 출력전류의 고조파를 감소시킬 수 있는 장점이 있어 고압 대용량 전동기 구동시스템에 적합하다. NPC 3-레벨 인버터를 이용한 IPMSM의 속도 제어에서 일정 토크 영역에서는 최대 토크 제어, 일정 출력 영역에서는 약계자 제어 방식을 적용하였다. 제안된 시스템은 MATLAB/Simulink를 이용한 시뮬레이터를 구현하여 모의 시험 결과 분석을 통해 그 타당성을 검증하였다.

• 한국정보통신학회논문지
• /
• 제11권3호
• /
• pp.540-548
• /
• 2007

본 논문에서는 기존의 역율 보상회로에 비해 성능이 좋은 역율 보상 고효율 PWM 단상 정류기를 제안하였다. 제안한 정류기의 설계를 용이하게 하기위한 설계 가이드라인을 상세히 제시하였으며, 제안한 정류기의 특성을 실험으로 증명하였다. 제안한 정류기는 주 전류가 흐르는 선로 구성에서 2개의 주스위치만 존재하므로 도통손을 상당히 감소 시켰으며, 또한 단일 ZVT 회로를 통해 스위칭 손실을 감소시켰다. 제안한 정류기는 부스트 컨버터형의 같은 IGBT 모듈을 사용하므로 주 회로 구성도 간단할 뿐만 아니라, 주 스위치와 보조스위치의 게이트 전원을 제어전원과 공유할 수 있어 단일 제어전원으로 전체 시스템을 제어하므로 시스템의 크기를 보다 콤팩트하게 할 수 있는 특성을 지니고 있다.

• Journal of Magnetics
• /
• 제16권1호
• /
• pp.51-57
• /
• 2011

A power supply for magnetic-stimulation devices was designed via a control algorithm that involved a start current application based on a resonant converter. In this study, a new power supply for magnetic-stimulation devices was designed by controlling the pulse repetition frequency and pulse width. The power density could be controlled using the start-current-compensation and ZCS (zero-current switching) resonant converter. The results revealed a high-repetition-frequency, high-power magnetic-stimulation device. It was found that the stimulation coil current pulse width and that pulse repetition frequency could be controlled within the range of 200-450 ${\mu}S$ and 200-900 pps, respectively. The magnetic-stimulation device in this study consisted of a stimulation coil device and a power supply system. The maximum power of the stimulation coil from one discharge was 130 W, which was increased to 260 W using an additional reciprocating discharge. The output voltage was kept stable in a sinusoidal waveform regardless of the load fluctuations by forming voltage and current control using a deadbeat controller without increasing the current rating at the starting time. This paper describes this magnetic-stimulation device to which the start current was applied.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제8권4호
• /
• pp.167-179
• /
• 2008

System risk is the totality of all safety risks to customers, employees, suppliers, and other third parties that arise due to system operations. To assess the risk of major hazards with the potential to cause fatality to the customers and other members of the public, quantitative risk assessment methodologies are used. This paper presents the general principles of risk based management approach to improve the safety of high risk systems such as aviation, railway, and nuclear power plants. For the suitable risk control arrangement, case studies of acceptable risk level, risk rating matrix, and safety management philosophy are presented.

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.45-49
• /
• 2008

For the development of superconducting fault current limiters (SFCLs), fault current limiting elements were fabricated out of Bi-2212 bulk tubes and tested. The SFCL elements consisted of tube shaped Bi-2212 bulks and metal shunts for the stabilizers. Firstly, the Bi-2212 bulk tubes were processed based on a design of monofilar coils in order to acquire large resistance and high voltage rating. 300 mm-long Bi-2212 tubes were designed to have the current path of 410 cm in length with 24 turns and 41 mm in diameter. The processed monofilar coil, as designed, had 300 A $I_c$ at 77 K. The fabricated superconducting monofilar coils were affixed to Cu-Ni alloy as that of stabilizers. The Cu-Ni alloys were processed to have the same shape of the superconducting monofilar coils. The Cu-Ni coil had resistivity of 32 ${\mu}{\Omega}$-cm at 77 K and 37 ${\mu}{\Omega}$-cm at 300 K. The metal shunts were attached to the outside of the Bi-2212 monofilar coil by a soldering technique. After the terminals made of copper were attached to both ends of the superconductor-metal shunt composite, the gap between the turns and the surface of the elements was filled with an epoxy and a dense mesh made of FRP in order to enhance the mechanical strength. The completed SFCL elements went through fault tests, and we confirmed that the voltage rating of 143 $V_{rms}$ (E =0.35 $V_{rms}$/cm) could be accomplished.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.546-548
• /
• 2005

This paper proposes a unity power factor ZVT PWM single-phase rectifier. The ZVT soft switching are achieved by using a simple ZVT circuit, and the reduced conduction losses are achieved by employing a single-stage converter, instead of a typical double-stage converter composed of front end diode rectifier and cascaded boost rectifier. Furthermore, thanks to good features such as simple PWM control at constant frequency, low switch stress and low VAR rating of commutation circuits, it is suitable for high power applications. The principle of operation is explained in detail, and simulation results of the new converter are also included.

• 전기학회논문지
• /
• 제61권9호
• /
• pp.1221-1225
• /
• 2012

This paper describes CSC(Current Sourced Converters)-based HVDC operational strategy for voltage stability enhancement in the power system. In case of CSC-based HVDC system, rectifier and inverter consume reactive power up to about 60% of converter rating. Therefore, CSC-based HVDC is basically not useful system for voltage stability even if AC filters and shunt capacitors are attached. But, If the particular power system condition is fulfilled, CSC-based HVDC also can be the rapid reactive power source for voltage stability enhancement using a cooperative control with converter and AC filters/Shunt Capacitors. In this paper, the cooperative control algorithm is presented and simulated to ${\pm}80kV$ 60MW HVDC system in Jeju island.

• 한국산업정보학회논문지
• /
• 제18권5호
• /
• pp.81-92
• /
• 2013

인공위성은 태양전지판 전개, 통신 안테나 전개, 관측 장비에 대한 오염방지 덮개, 추진계의 파이로테크닉 밸브 및 리튬-이온 셀 모듈 바이패스 장치 등 다수의 분리장치들을 포함하고 있다. 파이로테크닉 회로로 동작되는 분리장치의 기폭제들은 단발성으로 동작되기 때문에 기폭제 구동은 성공적 임무 수행을 위해 필수 요소이다. 파이로테크닉 회로는 안전을 위한 스위칭 네트워크를 포함해야 한다. 일반적인 스위칭 네트워크는 기폭제 점화 동안 스위칭 과도상태 전류를 취급하기 위해 높은 정격 전류 용량의 점화 스위치로 구성되는 단점이 존재한다. 파이로테크닉 회로는 기폭제가 메인버스에서 점화되면 버스에서 요구되는 첨두 전력을 감소시킬 수 있는 전력 조절 기능을 필요로 한다. 본 논문은 기폭제 점화 동안 스위칭 과도상태 전류를 취급하기 위해 높은 정격 전류 용량의 점화 스위치로 구성되는 단점을 극복하기 위해 점화 스위치를 작동시키기 위한 점화 명령에 동조된 파이로테크닉 회로를 설계한다. 파이로테크닉 회로는 점화스위치들이 점화 전류를 전달만 하고 스위칭을 하지 않는 것을 보증하기 위해 점화 명령에 동조되어 전류 제한된 윈도우 펄스 점화 전류를 제공한다. 전류 제한된 윈도우 펄스 점화 전류는 스위칭 네트워크에서 낮은 정격 전류 용량과 가벼운 무게의 스위치 사용을 가능하게 한다. 파이로테크닉 회로의 전류 제한 기능은 기폭제에 공급하는 전압을 감소시키고 첨두 버스 전력을 감소시키는 전력 조절 효과를 제공한다. 정지궤도위성 개발에 적용하기 위해 파이로테크닉 회로는 개발 모델에서 시험하여 기능을 검증하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권5호
• /
• pp.297-304
• /
• 2000

The motor for torpedo propulsion is needed the compact and short rating high power characteristics. This paper describes the development of the motor through the theory and Finite Element Method(FEM) analysis for Brushless Direct Current Motor(BLDCM) of 7 phase 6 poles. Back EMF, inductance and eddy current loss were analyzed. The proposed methods like magnetic wedge acquired by these FEM analysis were introduced. Phase-leading angle using encoder was used. Test results on the motor of 7 phase 6 poles were showed the validity of proposed methods and phase-leading angle.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.229-231
• /
• 2002

The digital current differential relaying scheme is widely used for primary protection of 765(kV) power transformer. The current differential relay pickup the internal fault at the threshold which is set at 30% of rating current. Margin of 30% include current transformer error 5%, relay error 5%, on load tap changer error 7% and margin factor 140% obtained from the field experience. In this paper transformer protection relay and relay setting rule of high voltage power system are discussed. And we verify the correctness of relay setting rule with current differential relay using Matlab simulation.