• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.3
• /
• pp.173-183
• /
• 1998

In this paper, an auto-tuning method for fuzzy controller's membership functions based on the neural network is presented. The neural network emulator offers the path which reforms the fuzzy controller's membership functions and fuzzy rule, and the reformed fuzzy controller uses for speed control of induction motor. Thus, in the case of motor parameter variation, the proposed method is superior to a conventional method in the respect of operation time and system performance. 32bit micro-processor DSP(TMS320C31) is used to achieve the high speed calculation of the space voltage vector PWM and to build the self-learning fuzzy control algorithm. Through computer simulation and experimental results, it is confirmed that the proposed method can provide more improved control performance than that PI controller and conventional fuzzy controller.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.10a
• /
• pp.222-225
• /
• 2003

In this paper the performance of the high speed circuit breaker with fault current detector is described. The operating mechanism of circuit breaker in use is a magnetic actuator and a fault current detector is based on the DSP and A/D converter. The results show that 3-cycle is enough to interrupt the fault current and the more speed up performance is expected with on-going project.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3E
• /
• pp.56-61
• /
• 1997

In this paper, we describe a real-time implementation of a multi-channel auido codec system that is based on the MPEG-1 audio algorithm. The major feature of this system is that it has a flexible multi-DSP system that can be adapted for various applications with using up to four TMS320C40 DSPs. The purpose of this paper is to present the problems of the system and is to describe the optimized methods to solve the problems in the view of hardware and software. Our audio codec is composed of an encoder an a decoder system and the bit rate of bitstream is up to 384 kbps. Fast input/output interfaces, DSP overloads, and inter-DSP communications methods with high speed are considered in multi-DSP H/W. Also, to run real-time in S/W, optimizing methods of algorithm are considered. After implementation of system, the subjective assessment method, and 'triple stimulus/hidden reference/double blind' that recommended by ITU-R TG10/3 is adopted for the quality of our system. All test items except one are awarded difference grades(diffgrade) better than 1-. Form the results, multi-channel audio system can be used for HDTV service.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.6
• /
• pp.311-317
• /
• 2011

In this paper, we proposed realtime image enhancing method on the three noise types of input images, such as haze, low contrast and back light images. Some conventional de-hazing algorithms have good performance but need large memories and high computational burdens. We proposed the efficient algorithm which not only removes the haze but also reduces memory usage and computational complexity. We implemented the realtime system by using DM6446 DSP chip, and it showed the excellent result in these three problems; haze, low contrast and back light. We implemented the system with the processing speed at 15 frames/sec.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.158-162
• /
• 2004

The magnetic levitator is the device which can float a magnetic material at the midair by electromagnetic force and it's principle can be applied to the high speed magnetic bearing or magnetic levitation train. There are many difficulties to control, because the magnetic levitator is basically a nonlinear and unstable system. In this paper, this system is modeled assuming that it is a linear system nearby an operating point, and a proportional and derivative(PD) position controller is designed to carry out the variable position control. The performance of position control response is shown through simulation and experiment. A prototype magnetic levitator is constructed using PWM converter and DSP(Digital Signal Processor) based control board.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.1
• /
• pp.85-100
• /
• 1991

In the discussion of digital mobile communication systems the speech coder based on the high quality low bit rate is an essential part of topics to overcome the limited availability of radio spectrum, which will enhance the communication services. In this paper we present the implementation and performance evaluation of 13kbps RPE LTP speech coder. An implementation of a real time full duplex coder with 75% of DSP loading rate using a single DSP chip has been shown, and also the fixed point simulations for H/W implementation has been performed. Finally, analysis result for relative bit importance of each transmitting parameter has been shown for channel coding.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.83-88
• /
• 2008

In this paper, a new scheduling method considering bit-level delays for high-level synthesis is proposed. Conventional bit-level delay calculation for high-level synthesis was usually limited for specific resources. However, we have developed an efficient bit-level delay calculation method which is applicable to various resources, in this research. This method is applied to scheduling. The scheduling algorithm is based on list scheduling and executes chaining considering bit-level delays. Furthermore, multi-cycle chaining can be allowed to improve performance under resource constraints. Experimental results on several well-known DSP examples show that our method improves the performance of the results by 14.7% on the average.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.918-924
• /
• 2009

This paper deals with the experimental assessment of the vibration suppression of the smart structures. First, we have presented the paper about the new high-speed active control system that we have developed using the DSP320C6713 microprocessor and a peripheral system composed of a data acquisition system, A/D and D/A converters, piezoelectric (PZT) actuator/sensors, and drivers using PA95. Since fast data processing is very important in the active vibration control of the structures, we utilized the fast processing DSP320C6713 microprocessor as a main processor to the controller and fast peripheral devices for fast control loop. To realize a fast active vibration control, we have analyzed and tested the processing time of the peripheral devices and provided the corresponding test results. Especially, we have focused on achieving the fast signal amplification of the PA95 device since it takes most of loop times of the control system. Finally, we performed numerous experiments of active vibration control of the aluminum plate to validate the superior performance of the developed control system based on previous mode tests of the plate.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.7
• /
• pp.498-506
• /
• 2003

A computer vision system applied to an intelligent safety vehicle has been required to be worked on a small sized real time special purposed hardware not on a general purposed computer. In addition, the system should have a high reliability even under the adverse road traffic environment. This paper presents a design and an implementation of an onboard hardware system taking into account for high speed image processing to analyze a road traffic scene. The system is mainly composed of two parts: an early processing module of FPGA and a postprocessing module of DSP. The early processing module is designed to extract several image primitives such as the intensity of a gray level image and edge attributes in a real-time Especially, the module is optimized for the Sobel edge operation. The postprocessing module of DSP utilizes the image features from the early processing module for making image understanding or image analysis of a road traffic scene. The performance of the proposed system is evaluated by an experiment of a lane-related information extraction. The experiment shows the successful results of image processing speed of twenty-five frames of 320$\times$240 pixels per second.

• Journal of information and communication convergence engineering
• /
• v.4 no.4
• /
• pp.170-173
• /
• 2006

Recently, with increasing efficiency of DSC (photo-electrochemical using a nano-particle), The Performance of DSC solar generation system also needs improvement. The approach consists of a Fly-back DC-DC (transfer ratio 1:10) converter to boost the DSC cell voltage to 300VDC. The four switch (MOSFET) inverter is employed to produce 220V, 60Hz AC outputs. High performance, easy manufacturability, lower component count., safety and cost are addressed. Protection and diagnostic features form an important part of the design. Another highlight of the proposed design is the control strategy, which allows the inverter to adapt to the: requirements of the load as well as the power source. A unique aspect of the design is the use of the DSP TMS320LF2406 to control the inverter by current and voltage feed-back. Efficient and smooth control of the: power drawn from the DSC Cell is achieved by controlling the front end DC-DC converter in current mode.