• 전기학회논문지
• /
• 제59권5호
• /
• pp.996-1000
• /
• 2010

In order to apply VLC (visible light communication) in harsh environment of nuclear power plant in-containment building, the high luminance LEDs, which are key components of the VLC system, have been gamma irradiated at the dose rate of 4 kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced coloration effect in the high luminance LED bulb made of acryl or plastic material was observed. In the VLC wireless data transmission experiment using the high luminance LEDs irradiated by high dose rate gamma-ray, the radiation induced coloration effect of the high luminance LED bulb extended the communication distance compared to non-irradiated LEDs.

• 제어로봇시스템학회논문지
• /
• 제16권6호
• /
• pp.586-591
• /
• 2010

VLC (Visible Light Communication) is a wireless communication method using light that is visible to the human eye. It has a major advantage that it causes no interference to RF-based devices. This makes wireless communication possible in RF hazardous areas such as nuclear facilities. In order to apply VLC communication in harsh environment of nuclear power plant, the high luminance LEDs, which are key components of the VLC communication, have been gamma-ray irradiated at the dose rate of 4kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced color-center was formed in the LED housing cap made of transparent plastic or acryl material. The beam degradations of high luminance LEDs by high dose-rate gammaray irradiation are analyzed using color CCD image processing technology.

• KIEAE Journal
• /
• 제8권6호
• /
• pp.21-26
• /
• 2008

According to the tendency of energy efficiency and environment-friendly chracteristics, demend of High-efficiency lighting using LED(Light Emitting Diode)are being increased actively and applied in various fields. However, In order to adequate application of LED light sources, it is necessary to lighting environment and luminous characteristics of LED light sources. This Study aims to characterize the work-plane lighting environment by LED light sources comparing with fluorescent light sources which are widely used. For the sake of this study, a fluorescent light source and 5 LED light sources were introduced and luminance and correlated color temperature were measured to evaluate luminance contrast. The experimental model is Mock-up which is $4.9m{\times}7.2m$ with a height of 2.9m. The test room was set up partition and desks. Luminance and correlated color temperature were measured work-plane on the desk which was set up local lighting by the Radiant Imaging ProMetric 1400. The optical characteristics data of LED can give a lot of advantages to design LED lighting appliances. Hereafter, the object of research will be conducted to evaluate effects of LED light sources on working performance, survey of visual performance, preference and physiology of subjects.

• 한국전기전자재료학회논문지
• /
• 제36권3호
• /
• pp.255-260
• /
• 2023

In order to spread LED lighting, LED lighting technology directly driven by alternating current (AC) commercial power has recently been introduced. Since current does not flow at a voltage lower than the threshold voltage of the LED, a non-conductive section occurs in the current waveform, and the higher the threshold voltage of the LED, the more discontinuous current waveforms are generated. In this paper, multi-LED modules are connected in series so that the threshold voltage can be adjusted according to the number of LED modules. A small number of LED modules are driven at a low instantaneous rectified voltage, and a large number of LED modules are driven at a high instantaneous rectified voltage to lengthen the overall lighting time of AC-LED lighting, thereby minimizing the luminance deviation of AC-LED lighting. In addition, the load current flowing through the LED module is adjusted to be the same as the design current even at the maximum rectified voltage higher than the design voltage, so that the light brightness of the LED module is kept constant. Therefore, even if the rectified voltage applied to the LED module changes, the AC-LED lighting in which the light brightness is constant and the luminance deviation is minimal has been realized.

• 한국전자통신학회논문지
• /
• 제10권5호
• /
• pp.615-622
• /
• 2015

반도체 제조기술의 발달로 고효율 및 고휘도의 LED가 개발됨에 따라 재래식 조명들로부터 LED를 이용한 조명으로 조명산업이 이동하는 추세이다. LED 조명등은 에너지 효율이 재래식 조명보다 뛰어나지만 많은 열이 발생한다는 단점이 있다. 특히 대형 LED 조명등에서는 이러한 발열문제가 심각한 실정으로, LED에 의한 메탈기판의 열은 납땜 부분을 열화시켜 조명등의 수명을 단축시키는 주된 원인이 된다. 따라서 대형 조명등을 개발하기 위해서는 이러한 열 문제를 해결하는 것이 매우 중요하다. 본 연구에서는 대형 LED 조명등에서 열문제를 해결하기 위한 방법을 제시하였고, 제시한 방식으로 1200W급 LED 조명등을 개발하였다. 본 연구에서 이용한 방법은 LED 조명등에 워터재킷을 설치하여 냉각수를 채웠으며, 소형의 수중펌프를 이용하여 냉각수를 순환시키는 방법을 이용하였다.

• 한국ITS학회 논문지
• /
• 제18권1호
• /
• pp.83-90
• /
• 2019

LED조명의 강점을 토대로 LED조명이 보급되고 있으며, 다양한 정부정책이 시행되고 있다. 조명을 활용한 무선통신 기술인 VLC 연구가 활발히 이루어지고 있으며, 많은 연구를 통해서 고속 데이터 전송기와 같은 일반적인 LED 광원을 사용할 수 있다는 것이 증명되었다. 그러나 여전히 주요 문제 중 하나로 라디오 방송의 잡음과 유사한 빛의 간섭문제가 있다. 이에 본 논문에서는 스펙트럼 분리형 VLC 채널을 위한 광 필터를 사용하여 주변 조명의 간섭을 제거하기 위한 모델을 제안하였다. 제안한 모델의 검증을 위하여 다양한 고휘도 RGB LED 모듈을 활용하여 비교분석을 진행하였으며, 추가로 실생활에 적용되어 활용 중인 고휘도 LED 조명을 활용한 실험을 통한 적용성을 검증하였다.

• 한국수산과학회지
• /
• 제39권6호
• /
• pp.480-486
• /
• 2006

The radiation characteristics of a high-luminance light-emitting diode (LED) light source were studied to evaluate its potential as an energy-saving light source for fishing lamps. The angle of the LED light source with 50% illuminance was $8-15^{\circ}$, and it had strong directional characteristics. The wavelengths at which the radiance and irradiance were maxima were 709, 613, 473, 501, 525, and 465 nm for red, orange, blue, peacock blue, green, and white light, respectively. The underwater transmission characteristics of the LED light source were superior in the order blue, white, peacock blue, and green in optical water type I: blue, peacock blue, white, and green in optical water type II; and blue, peacock blue, green, and white in optical water type III. Setting the underwater transmission characteristics of the LED light source in optical water type I at 100%, the transmission of water types II and III decreased to 67 and 17%, respectively. Based on the underwater transmission characteristics calculated in optical water types I-III, the blue and peacock blue LED light sources can be used as an energy-saving light source for fishing lamps.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.1-8
• /
• 2012

The performance and lighting characteristics of the LED depend on cooling condition because the power LED generates lots of heat. In this paper, the effect of the generated heat from power LED module on lighting characteristics and performance is measured and evaluated. For experiments, the transient temperature of a power LED module with cooling condition is measured. In addition, the temperature and lighting characteristics of the LED module are measured during the steady state. As a result, the cooling condition is less effective on the lighting characteristics of the LED module at rated current but the cooling condition extremely affects those of the LED module over the rated current. Because high temperature of the power LED module causes the low phosphor conversion, luminance efficiency becomes low and color temperature becomes high. When power LED module are driven over the rated condition, higher temperature is directly related to lighting characteristics and performance of the LED module rather than higher current.

• 한국광학회지
• /
• 제31권6호
• /
• pp.334-343
• /
• 2020

본 논문에서는 LED의 hot spot으로 인해 발생하는 눈부심을 감소시키기 위하여 간접광을 형성하는 조명 광학계 설계에 관한 연구를 진행하였다. LED를 실내 조명의 광원으로 사용하는 경우, 높은 휘도와 hot spot으로 인한 불균일한 휘도 분포로 인해 사용자에게 눈부심을 발생시키는 문제점이 있다. 특히, LED 스탠드의 경우 사용자의 눈에 가깝게 위치되어 있으며, 장시간 사용되기 때문에 눈부심 감소를 위한 연구가 필수적이다. 따라서 본 논문에서는 눈부심을 감소시키기 위한 LED 스탠드 광학계 구조 연구 및 설계를 진행하였다. 이후, 기존 LED 스탠드 제품과의 휘도 비교 및 분석을 통해 본 논문에서 제안한 반사형 LED 스탠드가 눈부심 면에서 더 우수한 성능을 가지는 것을 확인하였다.

• 반도체디스플레이기술학회지
• /
• 제15권4호
• /
• pp.79-85
• /
• 2016

For long life time and high efficiency, not necessary in improvement of LED chip structure, but also improve heat radiation for decrease heat in LED chip. In this study, efficiency decline factor has been investigated in LED lamp as study heat characteristic, luminance flux and heat resistance. When LED lamp temperature was increased, about 7% loss of luminance flux. In consequence of temperature analysis, width of fin was the most important factor of heat radiation. As a result, secure the enough heat path is very important factor of LED lamp design.