• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.29-36
• /
• 2002

High fluid concrete unlike OPC concrete is made with various material, and the phase of fresh concrete is considerably different. In order to understand fluidity phase and mix properties of high fluid concrete, concrete is required to access as suspension structure which consists of aggregate and paste. The focus of this paper is to analyze the test results and quantify the effect of mix proportions of molar and fineness modulus of ,and on the properties of fresh mortar. The effect of water-binder ratio, sand-binder ration, content; of ggbs (by mass of total cementitious materials), and various contents of water reducing agent on the yield stress and plastic viscosity of the mix is studied. Based on the experimental results, the following conclusion; can be drawn: (1) The mixing time needed (or high fluid mortar was approximately two times more than that of ordinary portland mortar. (2) The fluidity phase of mortar could be explained by yield stress of mix and the fluidity of mortar. (3) As the content of ggbs increased, yield stress of mortar was decreased and plastic viscosity of it was increased. (4) For the high fluid mortar, it was appeared that sand-binder ratio should be below 1.5.

• 한국건축시공학회지
• /
• 제2권4호
• /
• pp.145-152
• /
• 2002

High fluid concrete unlike OPC concrete is made with various material, and the phase of fresh concrete is considerably different. In order to understand fluidity phase and mix properties of high fluid concrete, concrete is required to access as suspension structure which consists of aggregate and paste. The focus of this paper is to analyze the test results and quantify the effect of mix proportions of mortar and fineness modulus of sand on the properties of fresh mortar. The effect of water-binder ratio. sand-binder ration. contents of ggbs (by mass of total cementitious materials). and various contents of water reducing agent on the yield stress and plastic viscosity of the mix is studied. Based on the experimental results, the fellowing conclusions can be drawn: (1) The mixing time needed for high fluid mortar was approximately two times more than that of ordinary portland mortar. (2) The fluidity phase of mortar could be explained by yield stress of mix and the fluidity of mortar. (3) As the content of ggbs increased, yield stress of mortar was decreased and plastic viscosity of it was increased. (4) For the high fluid mortar, it was appeared that sand-binder ratio should be below 1.5.

• 한국건축시공학회지
• /
• 제3권4호
• /
• pp.79-86
• /
• 2003

The purpose of study is to offer base data for high fluid concrete mix property, as grasp effect of aggregate to reach much more effect for producing high fluid concrete. For this study, there are three types of combined aggregates, river sand + river aggregate(type A), river sand + crusted aggregate(type B), washed sea sand + crushed aggregate(type C) and take a factor, water-contents, water-binder ratio and S/a. And so, we had following conclusion, resulting application-ability of high fluid mortar by K-slump tester to use a handy consistency measuring instrument. And so, we had following conclusion, resulting application-ability of high fluid concrete by K-slump tester to use a handy consistency measuring instrument. 1) In cafe of regular water binder ratio, high fluid concrete suffered much effect of combined aggregates and water binder ratio. Range of water binder ratio by combined aggregates is w/b 0.4 downward(type A and B), w/b 0.35 downward(type C). 2) Water contents to need for producing high fluid concrete is minimum 170kg/$\textrm{m}^3$ without regard to combined aggregates. 3) The effect of S/a on high fluid concrete by combined aggregates is approximately S/a 50% (type A and B), s/a 50-55% (type C). 4) Consistency measuring of high fluid concrete by K-slump tester is possible and first indication value, high fluid concrete can be produced, is 6~10.5cm.

• 농업과학연구
• /
• 제11권1호
• /
• pp.146-159
• /
• 1984

본(本) 연구(硏究)는 시멘트 분산제(分散劑) 및 고유동화제(高流動化劑)를 사용(使用)하여 모르터의 압축(壓縮) 및 인장강도(引張强度)와 감소율(減少率), 흐름시험(試驗)을 실시(實施)하였으며 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 최대강도(最大强度)를 나타내는 이화제(泥和劑)의 최적(最適) 첨가율(添加率)은 배합별(配合別) 공(共)히 같은 경향(傾向)으로 고유동화제(高流動化劑) SP는 0.6%이고 분산제(分散劑) LG와 C211은 0.2%, SK는 0.3%, C376은 0.5%로 나타났다. 그런데 사용적량(使用適量)의 2~3배(倍) 과다(過多) 사용시(使用時)는 강도(强度)가 급격(急激)히 저하(低下)하는데 이것은 수화작용(水和作用)에 악영향(惡影響)을 일으켜 응결(凝結)이 상당히 지연(遲延)되는 것으로 본다. 2. 적정량(適定量)의 이화제(泥和劑)를 첨가(添加)하였을 때 압축강도(壓縮强度)는 보통(普通)모르터 보다 재령(材令) 7일(日)에서 고유동화제(高流動化劑) SP는 40.7%, 분산제(分散劑)(C211은 19.5%, LG은 19.1%, SK는 18.1%, C376은 17.9%)의 평균(平均) 증가율(增加率)은 18.7%이었으며, 재령(材令)28일(日)에서는 고유동화제(高流動化劑) SP가 24.4%, 분산제(分散劑)(LG은 21.2%, C211은 16.4%, SK는 11.1%, C376은 7.6%)의 평균(平均) 증가율(增加率)은 14.1%로 나타냈다. 3. 적정량(適定量)의 이화제(泥和劑)를 첨가(添加)하였을 때 인장강도(引張强度)는 보통(普通)모르터 보다 재령(材令)7일(日)에서 고유동화제(高流動化劑) SP가 26.6%, 분산제(分散劑)(SK는 16.0%, C376은 14.7%, LG은 10.0%, C211은 5.8%)의 평균(平均) 증가율(增加率)은 11.6%이었다. 재령(材令)28일(日)에서는 고유동화제(高流動化劑) SP는 16.5%, 분산제(分散劑)(LG는 19.1%, SK는 10.6%, C211은 10.1%, C376은 8.7%)의 평균(平均) 증가율(增加率)은 12.1% 이었다. 4. 각각(各各)의 이화제(泥和劑)를 적량(適量) 첨가(添加)했을 때 모르터의 감수율(減水率)은 콘크리트의 감수율(減水率) 보다 작게 나온다. 즉 콘크리트의 감수율(減水率)은 15% 정도(程度) 감수(減水)했다고 했으나 모르터의 감수율(減水率)은 1 : 1의 경우는 최소(最少) 5.8%에서 최대(最大) 13.1%였고, 1 : 2의 경우는 최소(最小) 7.6%에서 최대(最大) 14.2%였으며, 1 : 3의 경우는 최소(最小) 9.5%에서 최대(最大) 18.8%의 범위(範圍)에 있었다. 5. 각(各) 이화제(泥和劑)의 유동성(流動性)은 고유동화제(高流動化劑) SP가 다른 분산제(分散劑) 보다 월등히 좋았다. 즉 1 : 1의 경우 w/c가 30%에서 280(75% 증가(增加)), 1 : 2의 경우는 w/c 가 36%에서 147(23.5% 증가(增加))로 가장 좋았으며, 1 : 3의 경우에서는 다른 분산제(分散劑)와 같은 경향(傾向)을 보였다. 그러므로 이러한 양질(良質)의 분산제(分散劑)는 프리팩트 콘크리트 공사(工事)에 사용(使用)하는 주입전충용(注入塡充用) 모르터에 적합(適合)한 것으로 사료(思料)된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.505-508
• /
• 2006

Self-leveling mortar is walkable bottom mortar which can maintain the horizontality of self fluid and have the the quick-setting quality, the low-human-effort practicable material of high-quality bottom in construction. In accordance with more adhesive strength with bottom side and absorption control, Primer is used for purpose to prevent pin-hole occurrence by self leveling mortar application prior to construction. This study is composed measurement of absorption, adhesive strength. Used material is NP-40 as nonionic emulsifying agent, uses SA-210L as negative ion emulsifying agent, uses APS, SBS as ridical initiator. A result of test, in accordance with image of Primer, as low temperature and application frequency, indicates low absorption rate and adhesive strength, as solid powder and dryness time is increse, absorption rate and adhesive strength lowly shows figure.

• 한국건설순환자원학회논문집
• /
• 제9권4호
• /
• pp.469-477
• /
• 2021

본 연구에서는 해양환경에 노출된 구조물의 내구성과 안전성 저하를 방지하는 셀룰로오스 방오 코팅제에 대한 기본적인 역학 성능을 평가하였다. 셀룰로오스 나노섬유와 AKD 및 폐유리 미분말을 주요 재료로 구성하여 제조하였으며, 접촉각 시험, 건조 시간, 점성 분석, 미세구조 분석을 실시하였다. 셀룰로오스 방오 코팅제를 1회 코팅할 경우 상대적으로 강재 시편에서 높은 소수성능을 발휘하는 것으로 나타났으며, 시멘트 모르타르에서는 AKD 함유량이 증가할수록 접촉각이 증가하는 것이 확인되었다. 3회 코팅시 최대 151.6°의 초소수성을 표면을 확인하였으며, 폐유리 미분말 혼입시 상대적으로 높은 소수성능을 갖는 것이 나타났다. 셀룰로오스와 증류수를 1:1 비율로 제조할 경우 의가소성 유체에 해당하여 코팅제로의 활용에 적합할 것으로 판단되었다.

• Advances in concrete construction
• /
• 제14권1호
• /
• pp.1-13
• /
• 2022

Due to the physical-chemical characteristics of some bottom ash (BA), there are technical, economic and environmental limitations to find a destination that will add value to it. In Brazil, this residue is eventually used for filling coal extraction pits or remains in sedimentation ponds, creating a susceptible panorama to environmental issues. The geopolymers binders are one of the alternatives to the proper use high amounts of these materials. In this work, geopolymeric binder pastes were produced with BA mixed to activators with different alkali contents (expressed as %Na₂O), as well as the incorporation of soluble silicates (Ms content). The production of binary geopolymeric pastes based on the use of two industrial wastes: fluid catalytic cracking (FCC) and aluminum anodizing sludge (AAS), was also assessed. The content in mass of BA/FCC and BA/AAS ranged from 100/0, 90/10; 80/20 and 70/30. Systems with soluble silicates as activator in a molar ratio SiO₂/Na₂O of 1.0 (Ms = 1.0) and Na₂O content of 15%, showed the best results of mechanical strength (42 MPa at day 28^th). The improvement is up to 5X when compared to NaOH based systems. For systems with partial replacement of BA of 10% of AAS and 20% of FCC (80/20), the presence of soluble silicates was also effective to increase compressive strength.