• 제목/요약/키워드: High Dynamic Range

검색결과 921건 처리시간 0.026초

고속전철 집전용 팬더그래프의 동적 추종 특성 향상에 관한 연구 (A Study on the Enhancement of Dynamic Follow-up Characteristics of a Pantograph for High-speed Trains)

  • 조용현;권태수;최강윤;김석원
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집B
    • /
    • pp.134-139
    • /
    • 2001
  • Pantographes should follow periodical motions with hanger and span passing frequencies during operation in order to have good dynamic follow-up characteristics. According to the dynamic simulations of a pantograph together with catenary systems, the best current collection performance of a pantograph is obtained when receptance peak frequencies are matched with hanger and span passing frequencies. Based on this principle, design variables of G7 pantograph are selected. However, because a high-speed train may run in the wide range of speeds and induce aero-acoustic noises, the design variables are adjusted to escape from these problems with a little sacrifice of current collection performance.

  • PDF

2차원 KTX 모델을 이용한 상로판형교의 상호작용해석 (Interaction Analysis of Deck Plate Girder Bridges Using 2-Dimensional KTX Model)

  • 김만철;양신추;이종득
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2000년도 춘계학술대회 논문집
    • /
    • pp.511-518
    • /
    • 2000
  • The high speed train service will be offered for high-quality transport service in existing railway by Korean National Railroad(KNR). Therefore, this paper presents the results of analysis carried out to determine the dynamic response characteristics of deck plate girder bridges which are representative elevated structures of existing railway and to evaluate their suitabilities for supporting Korea Train Express(KTX) trainsets in the speed range 0-250 km/h. Their dynamic characteristics are analyzed concerning structural safety, train-operation safety and passenger comfort. The simplified method for 2-dimensional train/track/bridge interaction analysis is utilized in the analysis of dynamic behaviors of deck plate girder bridges.

  • PDF

스마트 NUX용 고해상도 광각렌즈모듈 및 영상왜곡보정 설계 (Design of High-resolution Wide-angle Lenz Module, and Image Distortion Compensation for Smart NUX)

  • 이재곤;강민구;김원규;이경택
    • 한국전자통신학회논문지
    • /
    • 제7권5호
    • /
    • pp.999-1004
    • /
    • 2012
  • 본 논문에서는 광각렌즈기반의 WDR(Wide Dynamic Range)인 2M(Mega)급 CMOS 이미지 센서를 통해 왜곡영상을 보정하는 카메라 모듈의 설계와 렌즈영상의 성능을 분석한다. 또한, 설계한 광각렌즈모듈의 광각렌즈($176^{\circ}$) 특성으로 인한 왜곡영상의 보정된 결과를 분석하였으며, 카메라 모듈의 스마트 NUX(Natural User eXprience) 활용방안을 제안하였다.

SPI 제어기를 이용한 IPMSM 드라이브의 효율최적화 제어 (Efficiency Optimization Control of IPMSM Drive using SPI Controller)

  • 고재섭;정동화
    • 조명전기설비학회논문지
    • /
    • 제25권7호
    • /
    • pp.15-25
    • /
    • 2011
  • This proposes an online loss minimization algorithm for series PI(SPI) based interior permanent magnet synchronous motor(IPMSM) drive to yield high efficiency and high dynamic performance over wide speed range. The loss minimization algorithm is developed based on the motor model. In order to minimize the controllable electrical losses of the motor and thereby maximize the operating efficiency, the d-axis armature current is controlled optimally according to the operating speed and load conditions. For vector control purpose, a SPI is used as a speed controller which enables the utilization of the reluctance torque to achieve high dynamic performance as well as to operate the motor over a wide speed range. Also, this paper proposes current control of model reference adaptive fuzzy controller(MFC), and estimation of speed using artificial neural network(ANN) controller. The proposed efficiency optimization control, SPI, MFC, ANN in this paper is applied to IPMSM drive system, the validity of this paper is proved by analyzing response characteristics in variety operating conditions.

에러 분포의 예측을 이용한 비트 심도 확장 기술 (Bit Depth Expansion using Error Distribution)

  • 우지환;심우성
    • 방송공학회논문지
    • /
    • 제22권1호
    • /
    • pp.42-50
    • /
    • 2017
  • 비트의 심도 확장은 영상을 표현하는 비트 수를 확장하는 방법이다. HDR(High Dynamic Range) 디스플레이의 발전과 디스플레이의 해상도가 높아짐에 따라서, 디스플레이에서 영상을 표현하는 휘도가 증가하고 표현력도 상승한다. 이러한 디스플레이에 대응하기 위해서는 영상을 표현하는 비트수도 확장되어야 하기 때문에 비트의 심도 확장의 중요성은 높아지고 있다. 본 논문에서는, 높은 비트 심도(10bit)를 가지는 디스플레이에 기존의 영상(8bit)을 자연스럽게 표현하기 위한 비트 심도 확장 방법을 소개한다. 정량적인 결과와 정성적인 결과 및 연산량의 비교를 통해서 제안된 알고리즘이 기존의 비트 심도 확장 방법과 비교해서 우수함을 검증하였다. 제안된 방법은 기존의 최신 비트 심도 확장 방법과 비교해서, 40배 더 빠른 연산속도와 평균 1db이상 높은 성능 향상 결과를 보여준다.

$SiC_p/Al-Si$ 복합재료의 고온변형 특성 (High Temperature Deformation Behavior of $SiC_p/Al-Si$ Composites)

  • 전정식;고병철;김명호;유연철
    • 소성∙가공
    • /
    • 제3권4호
    • /
    • pp.427-439
    • /
    • 1994
  • The high temperature deformation behavior of $SiC_p/Al-Si$ composites and Al-Si matrix was studied by hot torsion test in a range of temperature from $270^{\circ}C$ to $520^{\circ}C$ and at strain rate range of $1.2{\times}10_{-3}~2.16{\times}10_{-1}/sec$. The hot restoration mechanisms for both matrix and composites were found to be dynamic recrystallization(DRX) from the investigation of flow curves and microstructural evolutions. The Si precipitates and SiC particles promoted DRX, and the peak strain$({\varepsilon}_p)$ of the composites was smaller than that of the matrix. Flow stresses of $SiC_p/Al-Si$ composites were found to be generally higher than the matrix, but the difference was quite small at higher temperature due to the decrease of capability of load transfer by SiC particles. With increasing temperature, failure strain of matrix and composites are inclined to increase, the increasing value of failure strain for the $SiC_p/Al-Si$ composites was small compared to that of matrix. The stress dependence of both materials on strain rate() and temperature(T) was examined by hyperbolic sine law, $\.{\varepsilon}=A_1[sinh({\alpha}{\cdot}{\sigma})]_n$exp(-Q/RT)

  • PDF

Ka-대역 UHD 위성방송용 저 잡음 하향변환기의 선형성 분석 (The Linearity Analysis of Low Noise Down-Converter for Ka-band UHD Satellite-broadcasting)

  • 목광윤;이영철
    • 한국전자통신학회논문지
    • /
    • 제12권2호
    • /
    • pp.267-272
    • /
    • 2017
  • 본 논문에서는 20GHz 이상의 Ka-대역 위성링크에서 대기 중의 감쇠가 심하므로 높은 품질의 영상신호를 수신하기 위하여 최저 잡음지수를 나타내는 하향변환기의 RF-전단부를 제시하였다. 또한 RF-전단부의 CDR, SFDR 및 OIP3을 버짓 분석에 의하여 높은 동적영역을 나타내는 파라미터 값과 선형성을 분석하였다. 설계된 Ka-대역 하향변환기의 전체이득은 61.8dB, 잡음지수는 1.05dB로 매우 우수한 특성 나타내었으며, 설계 제작된 하향변환기는 우수한 선형성을 요구하는 UHD 급의 고화질 영상전송용 Ka-대역 위성방송 하향변환기에 적용할 수 있다.

Multi-Band 이동통신용 수동혼변조왜곡 측정시스템 개발 (Implementation of Multi-Band Mobile PIMD Measurement System.)

  • 박기원;신동환;이영철
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 추계학술대회
    • /
    • pp.703-705
    • /
    • 2016
  • 본 논문에서는 광대역 특성을 갖는 이동통신 RF 모듈의 수동 혼변조 왜곡신호를 측정할 수 있는 시스템을 개발하였다. 광대역 특성을 나타내기 위하여 RF 수신단에서 저 잡음 특성과 광대역 특성을 만족하는 수신기를 설계하였으며 RF 수신 단에서 넓은 동적영역(high dynamic range)을 나타내도록 하였다. 설계된 수동 혼변조 왜곡 측정시스템에서 FPGA/DSP를 적용하여 측정된 PIMD신호를 PC에 기록하도록 프로그램 하였다. 650MHz-2700MHz 까지 가변하여 제3차 혼변조 왜곡신호를 측정하여 최고 -138dB를 나타내었다.

  • PDF

A Comparative Study on the Dielectric and Dynamic Mechanical Relaxation Behavior of the Regenerated Silk Fibroin Films

  • Um, In-Chul;Kim, Tae-Hee;Kweon, Hae-Yong;Ki, Chang-Seok;Park, Young-Hwan
    • Macromolecular Research
    • /
    • 제17권10호
    • /
    • pp.785-790
    • /
    • 2009
  • In this paper, the relaxation behavior of the regenerated silk fibroin (SF) films was investigated using dielectric thermal analysis (DETA), and compared with the dynamic mechanical behavior obtained from dynamic mechanical thermal analysis (DMTA), in order to gain a better understanding of the characteristics of dielectric behavior of SF film and identify the differences between the two analyses. Compared to DMTA, DETA exhibited a higher sensitivity on the molecular relaxation behaviors at low temperature ranges that showed a high $\gamma$-relaxation peak intensity without noise. However, it was not effective to examine the relaxation behaviors at high temperatures such as $\alpha-$ and ${\alpha}_c$-relaxations that showed a shoulder peak shape. On the contrary, DMTA provided more information regarding the relaxation behaviors at high temperatures, by exhibiting the changes in width, intensity and temperature shift of the $\alpha$-relaxation peak according to various crystallinities. Conclusively, DETA and DMTA can be utilized in a complementary manner to study the relaxation behavior of SF over a wide temperature range, due to the different sensitivity of each technique at different temperatures.

Characterization of saturation of CR-39 detector at high alpha-particle fluence

  • Ghazaly, M. El;Hassan, Nabil M.
    • Nuclear Engineering and Technology
    • /
    • 제50권3호
    • /
    • pp.432-438
    • /
    • 2018
  • The occurrence of saturation in the CR-39 detector reduces and limits its detection dynamic range; nevertheless, this range could be extended using spectroscopic techniques and by measuring the net bulk rate of the saturated CR-39 detector surface. CR-39 detectors were irradiated by 1.5 MeV high alpha-particle fluence varying from $0.06{\times}10^8$ to $7.36{\times}10^8\;alphas/cm^2$ from Am-241 source; thereafter, they were etched in a 6.25N NaOH solution at a temperature of $70^{\circ}C$ for different durations. Net bulk etch rate measurement of the 1.5 MeV alpha-irradiated CR-39 detector surface revealed that rate increases with increasing etching time and reaches its maximum value at the end of the alpha-particle range. It is also correlated with the alpha-particle fluence. The measurements of UV-Visible (UV-Vis) absorbance at 500 and 600 nm reveal that the absorbance is linearly correlated with the fluence of alpha particles at the etching times of 2 and 4 hour. For extended etching times of 6, 10, and 14.5 hour, the absorbance is saturated for fluence values of $4.05{\times}10^8$, $5.30{\times}10^8$, and $7.36{\times}10^8\;alphas/cm^2$. These new methods pave the way to extend the dynamic range of polymer-based solid state nuclear track detectors (SSNTDs) in measurement of high fluence of heavy ions as well as in radiation dosimetry.