• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.117-123
• /
• 2021

In this study, the composite was prepared by mixing SiOx, soft carbon, and carbon black and the electrochemical properties of lithium ion battery were investigated. The content of SiOx added to improve the capacity of the soft carbon anode material was varied to 0, 6, 8, 10, 20 wt%, and carbon black was added as a structural stabilizer for reducing the volume expansion of SiOx. The physical properties of prepared CB/SiOx/C composite were investigated through XRD, SEM, EDS and powder resistance analysis. In addition, the electrochemical properties of prepared composite were observed through the charge/discharge capacity, rate and impedance analysis of the lithium ion battery. The prepared CB/SiOx/C composite had an inner cavity capable of mitigating the volume expansion of SiOx by adding carbon black. The formed internal cavity showed a low initial efficiency when the SiOx content was less than 8 wt%, and low cycle stability when the content of SiOx was less than 20 wt%. The CB/SiOx/C composite containing 10 wt% of SiOx showed an initial discharge capacity of 537 mAh/g, a capacity retention rate of 88%, and a rate of 79 at 2C/0.1C. SiOx was added to improve the capacity of the soft carbon anode material, and carbon black was added as a structural stabilizer to buffer the volume change of SiOx. In order to use the CB/SiOx/C composite as a high-efficiency anode material, the mechanism of the optimal SiOx and the use of carbon black as a structural stabilizer was discussed.

• Korean Journal of Environment and Ecology
• /
• v.36 no.2
• /
• pp.139-149
• /
• 2022

This study aimed to prepare basic data for protecting the habitat of Fairy Pitta Pitta nympha and coping with climate change by detecting songs with bio-acoustic recording technology and identifying phenological characteristics in protected areas in Korea. The study sites were 36 protected areas nationwide. Data were collected between January and December 2019, and the analysis period was from May 1 to August 31, 2019. The main results are described as follows. Firstly, songs were detected in 22 out of 36 study sites. Frequency analysis results of songs show that high frequency was observed in southern inland, including Jeju island, and the area with the highest latitude was Seoraksan National Park. Secondly, the first song was observed in Hallyeohaesang National Park Geumsan on May 14, 2019, and the last song was observed in Ungok wetland in Gochang on August 6, 2019. Thirdly, circadian rhythm analysis results of songs show that the frequency rapidly increased at five o'clock in the morning, peaked at six o'clock, and then decreased afterward. Fourthly, seasonal cycle analysis results of songs show that they were observed from May 14, 2019 to August 6, and the day with the highest accumulated frequency of songs was June 3, 2019 (Julian date: 154). The average temperature of the day the songs were detected was 17.4℃, the average precipitation was 0.02mm, and the average humidity was 82.6%. Fifthly, a correlation analysis result between Fairy Pitta's songs and meteorological factors shows that temperature indicated a negative correlation with Fairy Pitta's songs (p<0.001), but precipitation (p=0.053) and humidity (p=0.077) did not indicate a statistical significance (df=471). This study is significant in that it confirmed the distribution of Fairy Pitta's songs using bio-acoustic recording technology in protected areas nationwide and identified their ecological characteristics by precisely analyzing the relationship between the song period and meteorological factors.

• Communications of Mathematical Education
• /
• v.36 no.3
• /
• pp.313-334
• /
• 2022

The purpose of this study is to analyze the changes in mathematical learning through applying STEAM education according to social needs for out-of-school youth. For this purpose, we developed a teaching and learning model and program for mathematics and music STEAM education, and we implemented and analyzed the changes of affective area and problem-solving strategies. The analysis results of characteristic in affective area are as follows: first, the activity-oriented class of mathematics and music STEAM education aroused interest in mathematics. Second, providing opportunities for mathematics and music STEAM education instilled a positive perception of the value of mathematics and STEAM education. Third, the autonomous communication-oriented learning environment of mathematics and music STEAM education improved confidence and motivation to learn in mathematics. The analysis results of the characteristic in problem-solving strategy are as follows: first, through the STEAM education with mathematics and music, a conceptual understanding of internally and externally dividing points was formed, and a given problem was expressed and solved in a formula. Second, the functional correspondence relationship was understood, and the given problem was described and solved with symbols associated with the function. The suggestions of the study are as follows: first, based on the teaching and learning model and results of this study, various STEAM education programs for out-of-school youth should be developed and expanded to foster future competencies and provide new changes for out-of-school youth. Second, it can be used for research on the development of teaching and learning materials for convergence elective subjects in the high school credit system by referring to the mathematics and music convergence STEAM program of this study. As the subjects and fields of STEAM education are diversified and organized, students in need of receiving educational opportunities will be reduced, and there will be a world where the name of out-of-school youth and alternative education will not be necessary. Therefore, it is expected that development of teaching and learning programs created by interest in education of out-of-school youth will be used as an innovative idea in school education to achieve a virtuous cycle.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.162-171
• /
• 2021

The Korean government proposed the K-SDGs in 2019 to promote the UN SDGs, but the role and tasks of science and technology, an important means of implementing the SDGs, have not been materialized. Accordingly, the role of science and technology ODA for the SDGs was established through the Ministry of Science and ICT's policy research project 'Science and Technology ODA Promotion Roadmap for Spreading the New Southern Policy and Realizing the 2030 SDGs'. In addition, goals, strategies, and core tasks for the next 10 years were derived in 10 fields such as water, climate change, energy, and ICT. In this paper, we analyze 30 key tasks of the ODA promotion roadmap for science and technology for the realization of SDGs, and propose mid- and short-term tasks and implementation plans for effective roadmap promotion. Among the key tasks in each field, four common elements were derived: ICT/smartization, a global problem-solving center, cooperation/communication platform, and business model/startup support platform/living lab that can create and integrate roadmap implementation conditions. In addition, the four mid- and short-term tasks, 1) Establishment of science and technology ODA network, 2) Establishment of living lab business platform linked to start-up support business, 3) Local smartization of recipient countries, and 4) Expand and secure sustainability of global problem-solving centers, were set in relation to the implementation of the detailed roadmap. For the derived mid- and short-term tasks, detailed implementation plans based on the ICTization of global problem-solving centers were presented. The implementation of the mid- and short-term tasks presented in this paper can contribute to the more effective achievement of the science and technology ODA roadmap, and it is expected that Korea's implementation of SDGs will also achieve high performance.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.5
• /
• pp.473-483
• /
• 2022

BIM(Building Information Modeling) is a technology that can manage information throughout the entire life cycle of the construction industry and serves as a platform for improving productivity and integrating the entire construction industry. Currently, BIM is actively applied in developed countries, and its use at various overseas construction sites is increasing This is unclear. due to air shortening and budget savings. However, there is still a lack of institutional basis and technical limitations in the domestic construction sector, which have led to the lack of utilization of BIM. Various activation measures and institutional frameworks will need to be established for the early establishment of these productive BIMs in Korea. Therefore, as part of the research for the domestic settlement and revitalization of BIM, this study derived a number of key factors necessary for the development of the construction industry through brainstorming and expert surveys using AHP techniques and analyzed the relative importance of each factor. In addition, prior surveys by a group of experts resulted in 1, 3 items in level, 2, 9 items in level, and 3, 27 items in level, and priorities analysis was performed through pairwise comparisons. As a result of the AHP analysis, it was found that the relative importance weight of policy aspects was highest in level 1, and the policy factors in level 2 and the cost-based and incentive system introduction factors were considered most important in level 3. These findings show that the importance of the policy guidance or institutions underlying the activation of BIM rather than research and development or corporate innovation is relatively high, and that the preparation of policy plans by public institutions should be the first priority. Therefore, it is considered that the development of a policy system or guideline must be prioritized before it can be advanced to the next activation stage. The use of BIM technologies will not only contribute to improving the productivity of the construction industry, but also to the overall development of the industry and the growth of the construction industry. It is expected that the results of this study can provide as useful information when establishing policies for activating BIM in central government, relevant local governments, and related public institutions.

• Journal of the Korean Electrochemical Society
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2023

The cathode, which is one of the four major components of a lithium secondary battery, is an important component responsible for the energy density of the battery. The mixing process of active material, conductive material, and polymer binder is very essential in the commonly used wet manufacturing process of the cathode. However, in the case of mixing conditions of the cathode, since there is no systematic method, in most cases, differences in performance occur depending on the manufacturer. Therefore, LiMn₂O₄ (LMO) cathodes were prepared using a commonly used THINKY mixer and homogenizer to optimize the mixing method in the cathode slurry preparation step, and their characteristics were compared. Each mixing condition was performed at 2000 RPM and 7 min, and to determine only the difference in the mixing method during the manufacture of the cathode other experiment conditions (mixing time, material input order, etc.) were kept constant. Among the manufactured THINKY mixer LMO (TLMO) and homogenizer LMO (HLMO), HLMO has more uniform particle dispersion than TLMO, and thus shows higher adhesive strength. Also, the result of the electrochemical evaluation reveals that HLMO cathode showed improved performance with a more stable life cycle compared to TLMO. The initial discharge capacity retention rate of HLMO at 69 cycles was 88%, which is about 4.4 times higher than that of TLMO, and in the case of rate capability, HLMO exhibited a better capacity retention even at high C-rates of 10, 15, and 20 C and the capacity recovery at 1 C was higher than that of TLMO. It's postulated that the use of a homogenizer improves the characteristics of the slurry containing the active material, the conductive material, and the polymer binder creating an electrically conductive network formed by uniformly dispersing the conductive material suppressing its strong electrostatic properties thus avoiding aggregation. As a result, surface contact between the active material and the conductive material increases, electrons move more smoothly, changes in lattice volume during charging and discharging are more reversible and contact resistance between the active material and the conductive material is suppressed.

• Pediatric Infection and Vaccine
• /
• v.30 no.2
• /
• pp.73-83
• /
• 2023

Purpose: This study aimed to investigate the viral load dynamics in children with underlying malignancies diagnosed with symptomatic coronavirus disease 2019 (COVID-19). Methods: This was a retrospective longitudinal cohort study of patients <19 years old with underlying hemato-oncologic malignancies that were diagnosed with their first symptomatic severe acute respiratory syndrome coronavirus 2 polymerase chain reaction (PCR)-confirmed COVID-19 infection during March 1 to August 30, 2022. Review of electronic medical records and telephone surveys were undertaken to assess the clinical presentations and transmission route of the patients. Thresholds of negligible likelihood of infectious virus was defined as E gene reverse transcription (RT)-PCR cycle threshold (Ct) value ≥25. Results: During the 6-month study period, a total of 43 children with 44 episodes of COVID-19 were included. Of the 44 episodes, the median age of the patients included was 8 years old (interquartile range [IQR], 4.9-10.5), and the most common underlying disease was acute lymphoid leukemia (n=30, 68.2%), followed by patients post-hematopoietic stem cell transplantation (n=8, 18.2%). Majority of the patients had mild COVID-19 (n=32, 72.7%), and three patients (7.0%) had severe/critical COVID-19. Furthermore, 2.3% (n=1) died of COVID-19 associated acute respiratory distress syndrome. The largest percentage of the patients showed E gene RT-PCR Ct value ≥25 between 15-21 days (n=13, 39.4%), followed by 22-28 days (n=10, 30.3%). In 15.2% (n=5), E gene RT-PCR Ct value remained <25 beyond 28 days after initial positive PCR. Refractory malignancy status (β, 67.0; 95% confidence interval, 7.0-17.0; P=0.030) was significantly associated with prolonged duration of E gene RT-PCR <25. A patient with prolonged duration of E gene RT-PCR Ct value <25 was suspected to have infectivity shown by the transmission of the virus to his mother at day 86 after his initial positive test. Conclusions: Children that acquire symptomatic COVID-19 during refractory malignancy state are at a high risk for prolonged shedding warranting PCR-based transmission precautions in this cohort of patients.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.2
• /
• pp.191-197
• /
• 1984

This study was conducted to investigate the flowering habit for the botanical types of peanut (Arachis hypogaea. L) in cultural limiting region. Eight peanut varieties pertaining to virginia, Spanish, Valencia, Shinpung type were used in this study. Shinpung type, a new erect type was developed at Crop Experiment Station, ORD. Appearance of the first flower of peanut plants is observed at a relatively early growing stage. Number of days to first flower were 41 days under vinyl-mulching while non-mulching culture took 55 days. Number of days to first flower were delayed in order of Valencia, Spanish, Shinpung, Virginia type. Flowering durations were distinguished among botanical types and days of those were Virginia 85-93, Spanish 101-105, Valencia 106-113, Shinpung 82-88 days, respectively. The Spanish and Valencia types produced more flowers than Virginia and Shinpung types. The maximum flowering stage of Shinpung and Virginia types reached early and ceased by one cycle, while Spanish and Valencia types came late and showed maximum stage through the early and late stage during the growth stage. By vinyl-mulching, the maximum flowering stage was shortened by 20 days than that of non-mulching. Distribution of flowers for each of branch positions to total flowers occupied 52-53% in two cotyledonary branchs, 23-27% in 3rd to 5th branchs, 20-25% in over. 6th branchs. Shinpung type was considered more favorable botanical type than the other types for the breeding of early maturing high yielding variety because of shortening of days to first flower, flowering duration and distribution of lower branch of effective flowers.

• Clean Technology
• /
• v.29 no.1
• /
• pp.31-38
• /
• 2023

Due to water shortages caused by water pollution and climate change, total organic carbon (TOC) standards have been implemented for wastewater discharged from public sewage treatment facilities. Furthermore, there is a growing interest and body of research pertaining to the reuse of sewage treatment water as a secure alternative water resource. The membrane bio-reactor (MBR) method is commonly used for advanced wastewater treatment because it can remove organic and inorganic ions and it does not require or emit any chemicals. However, the MBR process uses a separation membrane (MF), which requires frequent film cleaning due to fouling caused by a high concentration of mixed liquor suspended solid (MLSS). In this study, process improvement and microbubble cleaning efficiency were evaluated to improve the differential pressure, water flow, and MF fouling, which are the biggest disadvantages of operating the MF. The existing MBR method was improved by installing a precipitation tank between the air tank and the MBR tank in which raw water was introduced. Microbubbles were injected into a separation membrane tank into which the supernatant water from the precipitation tank was introduced. The microbubble generator was operated with a 15 day on, 15 day off cycle for 5 months to collect discharged water samples (4L) and measure TOC. As the supernatant water from the precipitation tank flowed into the separation membrane tank, about 95% of the supernatant water MLSS was removed so the MF fouling from biological contamination was prevented. Due to the application of microbubbles to supernatant water from the precipitation tank, the differential pressure of the separation membrane tank decreased by 1.6 to 2.3 times and the water flow increased by 1.4 times. Applying microbubbles increased the TOC removal rate by more than 58%. This study showed that separately operating the air tank and the separation membrane tank can reduce fouling, and suggested that applying additional microbubbles could improve the differential pressure, water flow, and fouling to provide a more efficient advanced treatment method.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.43-51
• /
• 2022

Regulation of the hair follicle cycle in association with dermal papilla cells is one of the most interesting targets for promoting hair regrowth. In this study, we examined whether steam-dried Betula platyphylla extracts (BPE) promote hair growth by upregulating in vitro and in vivo responses of dermal papilla cells. The data showed that BPE3 contained high amounts of phenolic compounds with higher antioxidant effects and increased hair growth-related genes, including fibroblast growth factor7 and Wnt7b, in dermal papilla cells. Notably, BPE3 effectively enhanced the formation of hair follicles by increasing FGF7, Wnt7b, and vascular endothelial growth factor in C57BL/6N dorsal skins. Additionally, BPE3 significantly decreased the expression of inflammatory repertoires, inducible nitric oxide synthase, interleukin-6, and cyclooxygenase 2. Several small molecules, such as betulin and unsaturated fatty acids, support the pharmacological activity of BPE3. In conclusion, BPE3 effectively promoted hair growth by activating dermal papilla cells and enhancing hair follicle cycles by attenuating the inflammatory environment in the scalp.