• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.178-178
• /
• 2016

Every display is equipped with a cover glass to protect the underneath displaying devices from mechanical and environmental impact during its use. The strengthened glass such as Gorilla glass.$^{TM}$ has been exclusively adopted as a cover glass in many displays. Conventionally, the strengthened glass has been manufactured via ion-exchange process in wet salt bath at high temperature of around $500^{\circ}C$ for hours of treatment time. During ion-exchange process, Na ions with smaller diameter are substituted with larger-diameter K ions, resulting in high compressive stress in near-surface region and making the treated glass very resistant to scratch or impact during its use. In this study, PIIID (plasma immersion ion implantation and deposition) technique was used to implant metal ions into the glass surface for strengthening. In addition, due to the plasmonic effect of the implanted metal ions, the metal-ion implanted glass samples got colored. To implant metal ions, plasma immersion ion implantation technique combined with HiPIMS method was adopted. The HiPIMS pulse voltage of up to 1.4 kV was applied to the 3" magnetron sputtering targets (Cu, Ag, Au, Al). At the same time, the sample stage with glass samples was synchronously pulse-biased via -50 kV high voltage pulse modulator. The frequency and pulse width of 100 Hz and 15 usec, respectively, were used during metal ion implantation. In addition, nitrogen ions were implanted to study the strengthening effect of gas ion implantation. The mechanical and optical properties of implanted glass samples were investigated using micro-hardness tester and UV-Vis spectrometer. The implanted ion distribution and the chemical states along depth was studied with XPS (X-ray photo-electron spectroscopy). A cross-sectional TEM study was also conducted to investigate the nature of implanted metal ions. The ion-implanted glass samples showed increased hardness of ~1.5 times at short implantation times. However, with increasing the implantation time, the surface hardness was decreased due to the accumulation of implantation damage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제2권6호
• /
• pp.299-311
• /
• 2008

The Radio Frequency IDentification (RFID) system is a contactless automatic identification system, which comprises readers and tags. In RFID systems, a reader collision occurs when there is interference in communication between one reader and the tags, due to the signals from other readers. The reader collision problem is considered as the fundamental problem affecting high density RFID reader installations. In this paper, we analyze the existing reader anti-collision algorithms. We also propose a pulse protocol-based reader anti-collision algorithm using slot occupied probability (SOP). The implementation of this improvement is simple, yet it effectively mitigates most reader collisions in dense reader mode, as shown in our simulation. That is, the proposed algorithm reduces the identification time, and increasesthe system throughput and system efficiency compared with the conventional reader anti-collision algorithms.

• 한국통신학회논문지
• /
• 제33권10A호
• /
• pp.987-996
• /
• 2008

본 논문에서는 기존 리더 충돌방지 알고리즘인 Channel Monitoring 알고리즘, Pulse Protocol 알고리즘에 대하여 살펴보고, 태그인식시간을 감소시키고, 데이터 처리량, 시스템 효율을 증가 시킬 수 있는 슬롯 점유확률을 이용한 Pulse Protocol 기반의 Hybrid 리더 충돌 방지 알고리즘을 제안한다. 제안하는 알고리즘은 Pulse Protocol 알고리즘의 성능을 향상시키기 위하여 Channel Monitoring 알고리즘에서 사용되고 있는 슬롯의 점유확률 (Occupied Probability)을 이용한다. 즉, 리더들은 랜덤 backoff 시간을 생성한 후, 자신이 사용하게 될 슬롯의 점유확률을 확인하고, 이 슬롯의 점유확률이 0보다 크다면, 새로운 랜덤 backoff 시간을 생성하여 리더간의 충돌을 피한다. 기존 알고리즘들과 제안하는 알고리즘과의 성능을 태그인식시간, 데이터 처리량 및 시스템 효율 등의 성능분석항목들을 통하여 비교 및 분석하여, 제안하는 알고리즘에 의하여 리더의 개수가 증가함에 따라 7% 정도의 태그인식시간 및 데이터 처리량 성능 향상을 확인한다.

• 대한전자공학회논문지SD
• /
• 제46권1호
• /
• pp.1-6
• /
• 2009

고전압 소자에서 스냅백 이후의 유지 전압은 구동전압에 비해 매우 작아서 고전압 MOSFET이 ESD(ElecroStatic Discharge) 파워클램프로 바로 사용될 경우 래치업 문제를 일으킬 수 있다. 본 연구에서는 스택 바이폴라 소자를 이용하여 래치업 문제가 일어나지 않는 구조를 제안하였다. 제안된 구조에서는 유지 전압이 구동전압 보다 높으므로 래치업 문제가 발생하지 않으면서, 기존의 다이오드를 사용한 고전압 파워클램프에 비해 면적이 작으며, 내구성 측면에서 800% 성능향상이 있게 되었다. 제안된 구조는 $0.35{\mu}m$ 60V BCD(Bipolar-CMOS-DMOS) 공정을 사용하여 제작되었으며, TLP(Transmission Line Pulse) 장비로 웨이퍼-레벨 측정을 하였다.

• 전력전자학회논문지
• /
• 제14권1호
• /
• pp.31-37
• /
• 2009

본 논문에서는 전계방출 원리를 이용하여 이미터로서의 성능이 뛰어난 탄소나노튜브 (Carbon Nano Tube)를 이용한 전계방출 면광원용 안정기를 제안한다. 안정기는 고전압 직류전압 부분과 양극의 펄스를 생성하는 부분으로 구성되어 있다. 탄소나노튜브를 이용한 전계방출 램프는 3가지의 전극 (애노드, 게이트, 캐소드)으로 구성되어 있는데, 애노드와 게이트 사이에는 직류 고전압이 공급되고 게이트와 캐소드 사이에는 양극의 펄스가 공급된다. 램프 및 안정기를 보호하기 위하여 과전류, 과전압, 과온도에 대한 보호 기능을 추가하였고, 실험을 통하여 제안된 방식이 탄소나노튜브를 이용한 램프 구동을 위한 적합함을 검증하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.135-135
• /
• 2015

Tubes are of extreme importance in industries as for fluid channels or wave guides. Furthermore, some weapon systems such as cannons use the tubes as gun barrels. To increase the service life of such tubes, a protective coating must be applied to the tubes' inner surface. However, the coating methods applicable to the inner surface of the tubes are very limited due to the geometrical restriction. A small-diameter cylindrical magnetron sputtering gun can be used to deposit coating layers on the inner surface of the large-bore tubes. However, for small-bore tubes with the inner diameter of one inch (~25 mm), the magnetron sputtering method can hardly be accommodated due to the space limitation for permanent magnet assembly. In this study, a new approach to coat the inner surface of small-bore tubes with the inside diameter of one inch was developed. Instead of using permanent magnets for magnetron operation, an external electro-magnet assembly was adopted around the tube to confine the plasma and to sustain the discharge. The electro-magnet was operated in pulse mode to provide the strong axial magnetic field for the magnetron operation, which was synchronized with the negative high-voltage pulse applied to the water-cooled coaxial sputtering target installed inside the tube. By moving the electro-magnet assembly along the tube's axial direction, the inner surface of the tube could be uniformly coated. The inner-surface coating system in this study used the tube itself as the vacuum chamber. The SS-304 tube's inner diameter was 22 mm and the length was ~1 m. A water-cooled Cu tube (sputtering target) of the outer diameter of 12 mm was installed inside of the SS tube (substrate) at the axial position. The 50 mm-long electro-magnet assembly was fed by a current pulse of 250 A at the frequency and pulse width of 100 Hz and 100 usec, respectively. The calculated axial magnetic field strength at the center was ~0.6 Tesla. The central Cu tube was synchronously driven by a HiPIMS power supply at the same frequency of 100 Hz as the electro-magnet and the applied pulse voltage was -1200 V with a pulse width of 500 usec. At 150 mTorr of Ar pressure, the Cu deposition rate of ~10 nm/min could be obtained. In this talk, a new method to sputter coat the inner surface of small-bore tubes would be presented and discussed, which might have broad industrial and military application areas.

• 대한한방내과학회지
• /
• 제28권3호
• /
• pp.560-569
• /
• 2007

Objectives : Ryodoraku is a physiological function test using electric current, and is closely related to skin sympathetic tone. Pulse analysis is known to reflect cardiovascular reactivity. There has been no report on the correlation between ryodoraku and pulse analysis in respiratory diseases. The present study examined the diagnostic values of ryodoraku and pulse analysis for respiratory disease patients Methods : For this study, we conducted ryodoraku and pulse analysis in 103 people including 79 respiratory disease outpatients who visited the $5^{th}$ Internal Department of the Oriental Medicine Hospital of Kyung Hee University during the period from January 1, 2003 to July 25, 2006, and 24 volunteers who did not have any respiratory symptoms or disease history. The respiratory disease patients were divided into five sub-groups according to their symptom: cough-sputum group, wheezing-dyspnea group ' nasal symptoms group. cold-prone group, and fatigue prone group. We compared the disease groups with the control group in six items as follows : mean ryodoraku, mean H1, mean elastic index, the percentage of those with mean ryodoraku below $40{\mu}A$, the percentage of those with HI beyond the physiological range, and the ratio of left : right of elastic index Results and Conclusions : Ryodoraku and pulse analysis were found to have a high value as quantitative diagnosis tools reflecting individuals' weakness and firmness. The results of this research suggest that ryodoraku and pulse analysis have value as tools for diagnosing respiratory diseases.

• Korean Journal of Acupuncture
• /
• 제32권4호
• /
• pp.151-159
• /
• 2015

Objectives : Pulse diagnosis is considered particularly important among several methods of diagnosis in DongUiBoGam. In spite of its importance, numerous and various pulse descriptions made it difficult to learn and practice pulse diagnosis. In this article, we tried to analyze properties of the twenty-seven pulses from pulse diagnosis cases from DongUiBoGam to enable the practical understanding of pulse diagnosis. Methods : We constituted the four axis according to the eight important pulses. And we analyzed properties of the twenty-seven pulses through the relationship between the four pairs of important pulses and the twenty-seven pulses. To quantify the relevances of important pulses to the twenty-seven pulses, we used the term frequency-inverse document frequency(TF-IDF) method. Results : We could elicit properties of the twenty-seven pulses according to the four axis. Also, we reexamined the categorization of the seven exterior pulses / the eight interior pulses and the similar pulses from DongUiBoGam with the analysis results. Conclusions : We could understand properties of the twenty-seven pulses more specifically with the eight important pulses. And we also could see the relationship among the twenty-seven pulses on each axis. However, the limitation arising from insufficient number of pulse diagnosis cases in this research requires further research with more sources such as other traditional medical records or clinical records in the present time.

• Journal of Korean Vacuum Science & Technology
• /
• 제3권1호
• /
• pp.85-89
• /
• 1999

FDE panel was successfully fabricated through the integration of a 0.7" diagonal Si-based Mo-tip FEA with 25${\times}$25 pixels, Y2O3:Eu or ZnO:Zn phosphor screen, and vacuum sealing through an exhausting glass tube, including a getter. The panel system was driven by an external driver circuit having pulse width modulation(PWM) driving scheme. Before character imaging, it was stabilized through tip aging by slowly increasing a pulse-mode emission current and phosphor aging by a coulombic charging process. After aging, luminescent characteristics such as emission uniformity, charging and arcing phenomena were shown to be improved significantly.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1372-1380
• /
• 1988

본 연구에서는 맥동연소식 온수기를 제작하기에 앞서 전체장치의 열전달을 예 측 분석할 수 있는 에너지 방정식을 세우고, 이를 바탕으로 하여 온수기의 설계 및 운 전인자가 열전달과 온수기의 효율에 미치는 영향을 조사하고자 한다. 이를 위하여 온수기내 맥동유동을 평균유동으로 가정하였고, 열전달계수는 평균유동 열전달계수에 맥동유동으로 인한 열전달증가인자를 곱하여 사용하였다.이렇게 하더라도 이 연구 의 목적인 설계 및 운전인자가 열전달 및 효율에 미치는 영향을 파악하는 데에는 충분 한 결과를 얻을 수 있다고 판단한다