• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.6
• /
• pp.25-33
• /
• 2014

This study investigates the reliability of DSRC-based traffic information system on the typical urban arterial with the minimum sample size method. VISSIM has been employed to calculate the required sample size. After comparing the number of hi-pass vehicles recorded from DSRC and the required sample size, this study found that the interrupted traffic state tends to generate more outliers than the uninterrupted one, the lack of the number of vehicles completely passing links with multiple driveways makes it difficult to estimate the reliable traffic information, the traffic information during peak hour is relatively more reliable than that during off-peak hour, and the reliability of DSRC-based traffic information system depends on the significance level in calculating the sample size. The driveway density and traffic signal operation due to the individual link length significantly affects the required sample size, resulting in determining the reliability of the DSRC-based traffic information system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.1-20
• /
• 2022

The basic way to charge vehicles for using road and public transport networks is the entry-exit toll system. This system works by reading Hi-Pass and public transportation cards of the vehicles using card readers. However, the problems of navigating a route in consideration of entry-exit toll systems include the non-additive costs of enumerating routes. This problem is known as an NP-complete task that enumerates all paths and derives the optimal path. So far, the solution to the entry-exit toll system charging has been proposed in the form of transforming the road network. However, unlike in the public transport network where the cards are generalized, this solution has not been found in situations where network expansion is required with a transfer, multi-modes and multiple card readers. Hence, this study introduced the Link Label for a public transportation network composed of card readers in which network expansion is bypassed in selecting the optimal path by enumerating the paths through a one-to-one k-path search. Since the method proposed in this study constructs a relatively small set of paths, finding the optimal path is not burdensome in terms of computing power. In addition, the ease of comparison of sensitivity between paths indicates the possibility of using this method as a generalized means of deriving an optimal path.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.74-83
• /
• 2011

The high-pass transportation information system directly collects section information by using probe cars and therefore can offer more reliable information to drivers. However, because the running condition and features of probe cars and statistical processing methods affect the reliability of the information and particularly because the section travel time is greatly influenced by whether there has been delay by signals on urban roads or not, there can be much deviation among the collected individual probe data. Accordingly, researches in multilateral directions are necessary in order to enhance the credibility of the section information. Yet, the precedent studies related to high-pass information provision have been conducted on the highway sections with the feature of continuous flow, which has a limit to be applied to the urban roads with the transportational feature of an interrupted flow. Therefore, this research aims at analyzing the features of high-pass transportation data on urban roads and finding a proper processing method. When the characteristics of the high-pass data on urban roads collected from RSE were analyzed by using a time-space diagram, the collected data was proved to have a certain pattern according to the arriving cars' waiting for signals with the period of the signaling cycle of the finish node. Moreover, the number of waiting for signals and the time of waiting caused the deviation in the collected data, and it was bigger in traffic jam. The analysis result showed that it was because the increased number of waiting for signals in traffic jam caused the deviation to be offset partially. The analysis result shows that it is appropriate to use the mean of this collected data of high-pass on urban roads as its representative value to reflect the transportational features by waiting for signals, and the standard of judgment of delay and congestion needs to be changed depending on the features of signals and roads. The results of this research are expected to be the foundation stone to improve the reliability of high-pass information on urban roads.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.83-94
• /
• 2017

There is a two lane ECTS(Electronic Toll Collection System) that users can pass with 80kph high speed in SeoBusan Tall Gate. This system to be combined two hi-pass lanes for removing meddle-island have been operated successfully. But, the appearance of two Lane ETCS makes toll gate more complicated, so it is very important how to arrange effectively various tolling lanes. This study was trying to evaluate lane configuration for minimizing speed and speed deviation among all kinds of lanes including two Lane ETCS in seoul toll gate. That is, we selected all scenarios to be happened actually, and evaluated them using micro traffic simulation model (VISSIM). The results of this study showed that each alternative had a very different speed and speed deviation by lane each other, so we will be able to achieve effective operation and configuration of lanes in toll gate using scenario methodology.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1303-1310
• /
• 2016

In this paper, electrocardiogram (ECG) analog front end with supply voltage of 0.5V has been designed and verified by measurements of fabricated chip. ECG is composed of instrument amplifier, 6th order gm-C low pass filter and variable gain amplifier. The instrument amplifier is designed to have gain of 34.8dB and the 6th order gm-C low pass filter is designed to obtain the cutoff frequency of 400Hz. The operational transconductance amplifier of the low pass filter utilizes body-driven differential input stage for low voltage operation. The variable gain amplifier is designed to have gain of 6.1~26.4dB. The electrocardiogram analog front end are fabricated in TSMC $0.18{\mu}m$ CMOS process with chip size of $858{\mu}m{\times}580{\mu}m$. Measurements of the fabricated chip is done not to saturate the gain of ECG by changing the external resistor and measured gain of 28.7dB and cutoff frequency of 0.5 - 630Hz are obtained using the supply voltage of 0.5V.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.97-104
• /
• 2015

PURPOSES : Expressways experience chronic and recurring congestion, especially during weekends and holidays, because of the increased demands for leisure-related travel. The alternatives to solve chronic and recurring congestion may be three-fold: (1) physical expansion of expressway capacities, (2) road pricing, and (3) temporal and spatial distribution of traffic demands. Among these, the third alternative may be the most cost-effective method for the Korea Expressway Corporation (KEC) that can be achieved by using the existing ITS infrastructure. METHODS : KEC initiated a pilot study in which the traffic on congested expressways was managed by providing traffic condition information (i.e., travel times) of neighboring national highways for taking detours via variable message signs (VMS). This study aimed to estimate the detour rate, and the two pilot studies on Seohaean and Yeongdong expressways yielded many benefits. RESULTS : It was revealed that the total length of congestion segments decreased by 7.8 km, and the average travel speed increased by 5.3 km/h. CONCLUSIONS : Based on these findings, it was concluded that the propagation of detour information via VMSs during congestion hours can help reduce congestion on expressways and increase the benefits of the entire network.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.3
• /
• pp.79-84
• /
• 2011

In this paper, we analyzed performance of vehicle detection for ITS (Intelligent Transport System) applications. We simulated the vehicle detection at Hi-Pass System is based on DSRC (Dedicated Short Range Communication). DSRC is a wireless network using ITS, including GPS (Global Positioning System) satellites in conjunction with the national transportation system. The system performance is evaluated in terms of bit error probability. In the simulation, the vehicle speed is set at 60 km/h and carrier frequency is 5.8 GHz. Wireless channel is modeled as the Rician fading channel. In the transmitter, the ASK (amplitude shift keying) modulation scheme is applied. From simulation results, we confirmed that performance of applied Alamouti scheme is better than other systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.830-833
• /
• 2016

자동차 번호판 인식은 대중적인 감시 기술 중의 한 종류로서, 주어진 비디오나 영상 내 광학문자 인식을 수반한다. 고속도로나 국도 상에 과속 단속 시스템, 재형 건물이나 유통센서 및 주차장 등에서 주차 정산 시스템, 고속도로 톨 게이트에서 hi-pass 에러 및 불법 도주 차량 잔속 시스템, 전국 주요 도로 불법 주 정차 단속 시스템, 공공기관, 기업 출퇴근 시간 확인 및 외부 차양 안내 시스템 등의 지능형 교통 시스템(ITS)이나 국도 상에 범위 차량 검거 시스템, 사건 발생 시 주요 도로상에 설치된 CCTV를 통해 용의 차량 이동 추적 시스템, 이동식 범죄 차량 조회, 버스에 탑재된 버스 전용차선 위반 단속들의 지능형 방범 시스템 등에 활용하고 있다. 번호판 인식은 자동차 번호판 국부화, 번호판의 크기, 차원, 명암대비, 밝기를 조정하는 정규화, 개별문자를 얻어내는 문자 분할, 문자를 인식하는 광학 문자 인식, 번호판의 형태, 크기, 위치 들이 연도별, 지역별로 차이가 있는 번호판들의 데이터베이스를 비교하여 구문 분석을 하는 절차를 거친다. 본 논문에서는 EmguCV를 이용하여 구현한 번호판 감지를 수행하여 위치를 찾아내고, 오픈 소스 광학 문자 인식 엔진으로 잘 알려져 있는 테서렉트 OCR을 이용하여 번호판의 문자를 인식하는 자동 인식 프로그램을 구현하고 기술하였다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.45-52
• /
• 2015

Purpose : The dose distribution of organ at risk (OAR) and normal tissue is affected by treatment technique in postoperative radiation therapy for prostate cancer. The aim of this study was to compare dose distribution characteristic and to evaluate treatment efficiency by devising VMAT plans according to applying differed number of arc and IMRT plan for postoperative patient of prostate cancer radiation therapy using a rectal balloon. Materials and Methods : Ten patients who received postoperative prostate radiation therapy in our hospital were compared. CT images of patients who inserted rectal balloon were acquired with 3 mm thickness and 10 MV energy of HD120MLC equipped Truebeam STx (Varian, Palo Alto, USA) was applied by using Eclipse (Version 11.0, Varian, Palo Alto, USA). 1 Arc, 2 Arc VMAT plans and 7-field IMRT plan were devised for each patient and same values were applied for dose volume constraint and plan normalization. To evaluate these plans, PTV coverage, conformity index (CI) and homogeneity index (HI) were compared and $R_{50%}$ was calculated to assess low dose spillage as per treatment plan. $D_{25%}$ of rectum and bladder Dmean were compared on OAR. And to evaluate the treatment efficiency, total monitor units(MU) and delivery time were considered. Each assessed result was analyzed by average value of 10 patients. Additionally, portal dosimetry was carried out for accuracy verification of beam delivery. Results : There was no significant difference on PTV coverage and HI among 3 plans. Especially CI and $R_{50%}$ on 7F-IMRT were the highest as 1.230, 3.991 respectively(p=0.00). Rectum $D_{25%}$ was similar between 1A-VMAT and 2A-VMAT. But approximately 7% higher value was observed on 7F-IMRT compare to the others(p=0.02) and bladder Dmean were similar among the all plan(P>0.05). Total MU were 494.7, 479.7, 757.9 respectively(P=0.00) for 1A-VMAT, 2A-VMAT, 7F-IMRT and at the most on 7F-IMRT. The delivery time were 65.2sec, 133.1sec, 145.5sec respectively(p=0.00). The obvious shortest time was observed on 1A-VMAT. All plans indicated over 99.5%(p=0.00) of gamma pass rate (2 mm, 2%) in portal dosimetry quality assurance. Conclusion : As a result of study, postoperative prostate cancer radiation therapy for patient using a rectal balloon, there was no significant difference of PTV coverage but 1A-VMAT and 2A-VMAT were more efficient for dose reduction of normal tissue and OARs. Between VMAT plans. $R_{50%}$ and MU were little lower in 2A-VMAT but 1A-VMAT has the shortest delivery time. So it is regarded to be an effective plan and it can reduce intra-fractional motion of patient also.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.11
• /
• pp.13-22
• /
• 2010

This paper proposed the dual-loops multiphase DLL based mixed VCO/VCDL for a high frequency phase noise suppression of the input clock and the multiple frequencies generation with a precise duty cycle. In the proposed architecture, the dual-loops DLL uses the dual input differential buffer based nMOS source-coupled pairs at the input stage of the mixed VCO/VCDL. This can easily convert the input and output phase transfer of the conventional DLL with bypass pass filter characteristic to the input and output phase transfer of PLL with low pass filter characteristic for the high frequency input phase noise suppression. Also, the proposed DLL can correct the duty-cycle error of multiple frequencies by using only the duty-cycle correction circuits and the phase tracking loop without additional correction controlled loop. At the simulation result with $0.18{\mu}m$ CMOS technology, the output phase noise of the proposed DLL is improved under -13dB for 1GHz input clock with 800MHz input phase noise. Also, at 1GHz operating frequency with 40%~60% duty-cycle error, the duty-cycle error of the multiple frequencies is corrected under $50{\pm}1%$ at 2GHz the input clock.