• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.3
• /
• pp.182-187
• /
• 2011

In this paper, PBTI characteristics of NMOSFETs with La incorporated HfSiON and HfON are compared in detail. The charge trapping model shows that threshold voltage shift (${\Delta}V_{\mathrm{T}}$) of NMOSFETs with HfLaON is greater than that of HfLaSiON. PBTI lifetime of HfLaSiON is also greater than that of HfLaON by about 2~3 orders of magnitude. Therefore, high charge trapping rate of HfLaON can be explained by higher trap density than HfLaSiON. The different de-trapping behavior under recovery stress can be explained by the stable energy for U-trap model, which is related to trap energy level at zero electric field in high-k dielectric. The trap energy level of two devices at zero electric field, which is extracted using Frenkel-poole emission model, is 1,658 eV for HfLaSiON and 1,730 eV for HfLaON, respectively. Moreover, the optical phonon energy of HfLaON extracted from the thermally activated gate current is greater than that of HfLaSiON.

• Journal of Nutrition and Health
• /
• v.24 no.4
• /
• pp.314-325
• /
• 1991

To compare the hypolipidemic effects of n6 and n3 PUFA at different fat levels, male Sprague Dawley rats were fed either low fat (LF, 10% Cal) or high fat (HF, 40% Cal) diet which was different only in fatty acid composition for 6 weeks. Dietary fats were beef tallow, corn oil, perilla oil, and fish oil concentrate as a source of saturated fatty acid, n6 linoleic acid(LA). n3 ${\alpha}-linolenic$ acid(LL) and n3 eicosapentaenoic acid(EPA)+docosahexaenoic acid(DHA), respectively. VLDL fraction was separated by ultracentrifugation and chemical composition was determined by thin layer chromatography. Plasma cholesterol level was increased by n6 LA but decreased by n3 LL and n3 EPA in LF and HF diets, and the hypocholesterolemic effect of n3 EPA was most significant in HF diet. HDL-Chol level was raised by n6 LA in LF and HF diets, but significantly reduced by n3 EPA in HF. Plasma TG level was reduced by n6 LA n3 LL and EPA in LF and HF with the reduction of lipogenic enzyme activity only by n3 PUFAs. The proportion of TG in VLDL fraction was significantly lowered by n3 EPA in LF and HF. The proportion of apo-B in VLDL fraction was not changed in LF, but was significantly decreased in HF by n3 EPA. Therefore, the hypotriglyceridemic effect of n3 PUFA could be from the reduced lipogenesis in liver and resulted in the depressed secretion of TG as VLDL in LF and HF with significant lower production of apoB in HF diet.

• Journal of Powder Materials
• /
• v.18 no.6
• /
• pp.568-574
• /
• 2011

As operating temperatures of engines or turbines continually increase for higher efficiency, significant amounts of researches have been focused on finding new materials, which would be alternatives to conventional yttria-stabilized zirconia (YSZ) for thermal barrier coatings (TBCs). In this study, phase evolution and thermo-physical properties of $La_2(Zr_{1-x}Hf_x)_2O_7$ pyrochlore systems are investigated for TBC applications. $La_2(Zr_{1-x}Hf_x)_2O_7$ systems are comprised by selecting $La^{3+}$ as A-site ions and $Zr^{4+}/Hf^{4+}$ as B-site ions in $A_2B_2O_7$ pyrochlore structures. For the developed phases in $La_2(Zr_{1-x}Hf_x)_2O_7$ compositions, thermo-physical properties such as thermal conductivity, thermal expansion coefficient are examined. The potential of these $La_2(Zr_{1-x}Hf_x)_2O_7$ compositions for TBC application is also discussed.

• Journal of the Korean Ceramic Society
• /
• v.21 no.3
• /
• pp.231-238
• /
• 1984

Heavy metal fluoride glasses exhibit considerable promise as high transparency materials from the UV to the IR. These glasses are prepared by fusion of the mixture of metal fulorides($ZrF_4$, $BaF_2$, $LaF_3$ etc) at 800-1, 00$0^{\circ}C$ under the inert$(N_2)$ or reactive ($CCl_4$, $Cl_2$) atmosphere following the casting into glass on cooling. Infrared absorption at the 3, 400 cm-1 -OH peak has been measured as a function of thickness for several ZrF-$BaF_2$-LaF and $HfF_4$-$BaF_2$-$LaF_3$ glasses to separate contributions from bulk and surface -OH. For glasses melted under $CCl_4$ reactive atmosphere the peak is due almost entirely to surface-OH. and melting in a closed reactor was best for removing -OH. In ambient atmosphere the -OH peak exhibited no time dependence over a 30 d period indicating a very small rate of surface attack by atmospheric H2O. Removal of -OH absorption processing was generally easier and more complete for the $BaF_2$/ThF4-glasses than for the $ZrF_4$-or $HfF_4$-based glasses.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.378-378
• /
• 2010

We report the electronic structure of CoFeO-R (R=Hf, La, Nb) thin films studied by x-ray absorption spectroscopy (XAS). These ferrites thin films were prepared by pulsed laser deposition method and characterized by XAS measurements at O K-, Co and Fe L-edges. The O K-edge spectra suggest that there is a strong hybridization between O 2p and 3d electrons of transition metal cations and Fe $L_{3,2}$-edge spectra indicate that Fe-ions exist in $Fe^{2+}$ with tetrahedral site of the spinel structure. Divalent Co ions is also distributed in tetrahedral site with rare earth ions goes to octahedral sites of spinel structure. X-ray magnetic circular dichroism (XMCD) is also used to explain the symmetry and magnetic nature dependence on rare-earth ions.

• Journal of Conservation Science
• /
• v.21
• /
• pp.89-100
• /
• 2007

This study analyze concentration of minor and trace elements on 47 white porcelains excavated from Dudong-ri, Baekryeon-ri, Sachon-ri kilns in Gyeonsangnam-do by NAA(neutron activation analysis) and try to classify the provenance and characteristics according to the analytical result. Each kilns are divided into the group by PCA(principal component analysis) and LDA(linear discrimination analysis) using 17 elements; Ba Ce, Co, Cr, Cs, Dy, Eu, Hf, La Lu, Rb, Sc, Sm, Ta, Th, V, Yb. The contribution elements are Dy, Sm, La, Ce, Lu, Sc. And soft and hard white porcelains are similar with the chemical composition of the use materials therefore the difference of the chemical composition not confirmed a cause. The analytical results of the fine(I) and poor(II) quality white porcelains presume the difference of the povenance of clay materials or the poduction process such as difference purify and additive materials.

• Journal of Life Science
• /
• v.22 no.4
• /
• pp.516-523
• /
• 2012

The purpose of this study was to investigate the effect of exercise and/or L-arginine on abdominal fat, IGF-1 on GH/IGF-1 axis, fibrinogen, and PAI-1 in aged and obese rats. Male Sprague-Dawley rats were treated with a D-galactose aging inducing agent (50 mg/kg) given intraperitoneally for 12 weeks. Thirty-two male Sprague-Dawley rats were treated and divided into four groups: aging-high fat diet group (AG+HF), AG+HF with L-arginine intake group (AG+LA), AG+HF with exercise group (AG+EX), and AG+EX with L-arginine intake group (AG+LA+EX). The experimental rats underwent treadmill training (60 min/day, 6 days/week at 0% gradient) for 12 weeks. L-arginine was given orally (150 mg/kg/day) for 12 weeks. After the experiment, blood was collected from the left ventricle and abdominal fat was extracted. The results showed that GH was significantly increased in AG+EX and AG+AL+EX. IGF-1 was significantly increased in both the AG+AL+EX and AG+EX group ($p$<0.05), while fibrinogen and PAI-1 were not significantly different among the groups. Abdominal fat was significantly decreased in the AG+LA, AG+EX, and AG+LA+EX groups ($p$<0.05) compared with the AG+HF group. In conclusion, this study suggests that exercise alone or L-arginine alone or a combination not only increases the GH and IGF-1 concentration, but also decreases the abdominal fat mass.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.140-140
• /
• 2009

The Metal-ferroelectric-semiconductor (MFS) structure has superior advantages such as high density integration and non-destructive read-out operation. However, to obtain the desired electrical characteristics of an MFS structure is difficult because of interfacial reactions between ferroelectric thin film and Si substrate. As an alternative solution, the MFS structure with buffer insulating layer, i.e. metal-ferroelectric-insulator-semiconductor (MFIS), has been proposed to improve the interfacial properties. Insulators investigated as a buffer insulator in a MFIS structure, include $Ta_2O_5$, $HfO_2$, and $ZrO_2$ which are mainly high-k dielectrics. In this study, we prepared the Dy-doped $La_2O_3$ solution buffer layer as an insulator. To form a Dy-doped $La_2O_3$ buffer layer, the solution was spin-coated on p-type Si(100) wafer. The coated Dy-doped $La_2O_3$ films were annealed at various temperatures by rapid thermal annealing (RTA). To evaluate electrical properties, Au electrodes were thermally evaporated onto the surface of the samples. Finally, we observed the surface morphology and crystallization quality of the Dy-doped $La_2O_3$ on Si using atomic force microscopy (AFM) and x-ray diffractometer (XRD), respectively. To evaluate electrical properties, the capacitance-voltage (C-V) and current density-voltage (J-V) characteristics of Au/Dy-doped La2O3/Si structure were measured.

• Journal of the Korean Ceramic Society
• /
• v.27 no.3
• /
• pp.430-436
• /
• 1990

Glasses of different compositions were synthesized by substituting each component of 56ZrF4-14BaF2-6LaF3-4AlF3-20NaF(ZBLAN) with HfH4, SrF2, GdF3, InF3 and LiF3, each of similar size and chemical property with the component being substituted, respectively. The heating rate used in the DSC runs was 10K/min. All ofthe glasses exhibit glass transition temperatures of 510$\pm$10K, while crystallization temperatures vary between 625 and 720K depending upon different glass compositions. For most glasses crystallization temperatures obtained while cooled are lower than those obtained while heated, but InF3 or SrF2 containing glasses showed opposite trend. HBLAN, ZHBLAN and ZHBLANLi glasses, which were made by substituting HfH4, LiF for ZrF4 and NaF of ZBLAN respectively, showed improvement in the glass stability.

• Analytical Science and Technology
• /
• v.20 no.3
• /
• pp.219-226
• /
• 2007

Glass is frequently encountered as types of materials that are submitted to forensic science laboratories as a result of trace evidence transfers. The repeatability and the reproducibility of trace element analysis were presented. An analysis of variance (ANOVA) was performed on laser ablation inductively coupled plasma spectrometric analyses of the fragments to identify the source. Pairwise comparisons were completed for all samples. In a pairwise comparison, each sample was compared to each other for a possible [n(n-1)/2] (n : numbers of the samples) total comparison to associate/discriminate samples using Tukey's HSD method. The aim of this study was to determine the utility of LA-ICP-MS for multi-element analysis of forensic samples. The 12 glass fragments from two manufacturers were collected and analyzed to identify the source. An analysis of variance (ANOVA) was performed on 31 elements in NIST 612 Trace elements in Glass. Elements were classified into four categories defined by the combination of precision and variation of inter-samples. We selected 11 elements, 209Bi, 90Zr, 121Sb, 178Hf, 59Co, 238U, 208Pb, 140Ce, 118Sn, 49Ti and 137Ba. 6 pairs out of 66 possible pairs were not distinguished when compared by 137Ba (p<0.05). However, all samples were distinguished using both 49Ti and 137Ba (p<0.05). In conclusion, multi-elemental analysis with LA-ICP-MS is a potential tecnique for the discrimination of forensic samples.