• Atmosphere
• /
• v.26 no.3
• /
• pp.473-482
• /
• 2016

An accurate determination of turbulent fluxes over an urban area is a challenging task due to its morphological diversity and associated flow complexity. In this study, an eddy covariance (EC) method is applied over a highly heterogeneous urban area in a small city (Gongju), South Korea to investigate the quantitative influence of 'coordinate tilt' in determining the turbulent fluxes of sensible heat, latent heat, momentum, and carbon dioxide mass. Two widely-used coordinate transform methods are adopted and applied to eight directional sections centered on the site to analyze a 1-year period EC measurement obtained from the urban site: double rotation (DR) and planar fit (PF) transform. The results show that mean streamline planes determined by the PF method are distinguished from the sections, representing morphological heterogeneity of the site. The sectional pitch angles determined by the DR method also compare well with those in the PF method. Both the PF and DR methods show large variabilities in the determined streamline planes at each directional section, implying that flow patterns may form in a complicate way due to the surface heterogeneity. Resulting relative differences of the turbulent fluxes, defined by $(F_{DR}-F_{PF})/F_{DR}$, are found on average +13% in sensible heat flux, +21% in latent heat flux, +37% in momentum flux, and +26% in carbon dioxide mass flux, which are larger values than those reported previously for fairly homogeneous natural sites. The fractional differences depend significantly on wind direction, showing larger differences in northerly winds at the measurement site. It is also found that the relative fractional differences are negatively correlated with the mean wind speed at both stable/unstable atmospheric conditions. These results imply that EC turbulent fluxes determined over heterogeneous urban areas should be carefully interpreted with considering the uncertainty due to 'coordinate tilt' effect in their applications.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2016

In this paper, for the improvement of quality of service(QoS) performance of heterogeneous networks, multi-cell scheduling is proposed. In order to implement the proposed algorithm, for the recognition of the impact on the throughput performance of users, macro-pico-cells that form distributed architecture were proposed. In operating heterogeneous networks, considering the centralized structure, a macro-RRH(Remote Radio Head) deployment scenario was proposed. For interference mitigation of the proposed system, by applying the optional sub-frame, through CQI(Channel Quality Indicator) measurement for each sub-frame period, constraint conditions were measured according to system situations. For the simplification, the pattern of the same ABS muting was assumed. In the above two multi-cell environments, the algorithm of high-speed load balancing maintenance was proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.910-920
• /
• 2011

In a heterogeneous wireless environment, a variety of Radio Access Technologies (RATs) coexist. Since the number of RATs is anticipated to increase in the near future, it is desirable to have radio and network resources managed in a cooperative manner using the Common Radio Resource Management (CRRM) strategy. In order to make RAT-specific radio resources manageable in CRRM, this paper proposes the Analytical Network Process (ANP) based resource management scheme that efficiently allocates resources among heterogeneous wireless networks. The proposed ANP-based method is flexible enough to be used in any network environment and can consider a multitude of decision factors. In addition, the proposed scheme uses a radio bandwidth model, which properly reflects transmission rates under given channel conditions, as the actual radio resources to be allocated. The model considers the AMC (Adaptive Modulation and Coding) scheme that is widely used in current broadband wireless access technologies, and thus, packet service characteristics, such as response time, can be analyzed. The effectiveness and flexibility of the proposed method are demonstrated by implementing a number of existing factors on heterogeneous networks environment.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.223-228
• /
• 2008

Recently, various types of wireless access networks, such as WLAN, WiBro and HSDPA, etc, have been successfully deployed by commercial service providers (i.e., KT, KTF). In this situation, there are many efforts to provide high quality of services to guarantee seamless mobility between heterogeneous networks. The IP layer mobility protocols are efficient mechanisms to provide seamless mobility between IP based heterogeneous networks as well as homogeneous networks. However, to apply IP mobility protocols in real heterogeneous networks (i.e., WiBro and HSDPA), we must consider not only the basic features of techniques of wireless access networks (i.e., Data rate, Coverage, Quality of Service) but also the problem of real environment of service provider (i.e., Expanse cost to change the access network). Due to this reason, it is difficult to satisfy required conditions by using only one IP mobility protocol in real heterogeneous networks. Therefore, in this paper, we propose an efficient mobility protocol to solve the complex problems that are occurred in real heterogeneous networks. The proposed protocol, so-called, "Hybrid Mobile IP" tries to provide a synergy effect by integrating Client Mobile IPv4 (CMIPv4) and Proxy Mobile IPv4 (PMIPv4), and using the two mobility protocols selectively according to the situation of real heterogeneous networks.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2243-2248
• /
• 2011

Carbon-based solid acid catalyst was found to be highly efficient, eco-friendly and recyclable heterogeneous catalyst for the multicomponent reaction of dimedone, aromatic aldehydes, and a nitrogen source (ammonium acetate or aromatic amines) under solvent-free conditions, giving rise to 1,8-dioxodecahydroacridines in high yields. The present methodology offers several advantages, such as a simple procedure with an easy work-up, short reaction times, high yields, and the absence of any volatile and hazardous organic solvents.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3289-3294
• /
• 2013

An efficient method for the preparation of 8-benzylidene-4-phenyl-3,4,5,6,7,8-hexahydro-1H-quinazolin-2-ones/thiones from the reaction of aromatic aldehydes with cyclohexanone and urea or thiourea in the presence of Tetrabutylammonium hexatungstate, $[TBA]_2[W_6O_{19}]$, as an efficient, inexpensive catalyst under thermal and solvent-free conditions has been developed. Good yields, short reaction times, straightforward workup, reusability of the catalyst, and green conditions are the most obvious advantages of this procedure.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3551-3553
• /
• 2012

1,5-Diacetyl-3,7-dinitro-l,3,5,7-tetraazacyclooctane (DADN) is a key intermediate in the preparation of octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), one of the most powerful high-melting explosives. The present investigation focuses on nitrolysis of DADN to HMX by developing a new nitrolysis process involving the use of nitric acid catalyzed by Silica Sulfuric Acid (SSA). In order to optimize the process parameters for synthesis of HMX to obtain higher yield and purity, a study was carried out with variation of some parametric conditions like time, mole ratio of SSA and nitric. This method gave us green and mild conditions for nitration reaction.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.240-247
• /
• 2017

In this study, the heterogeneous ion exchange membranes prepared by the combination of the carbon electrode and mixed the cation and anion exchange polymers and polyvinylidene fluoride as the basic polymer together were made to recognize the efficiency of the salt removal for the application of the membrane capacitive deionization process. The mixing weight ratio of the solvent, basic polymer and ion exchange resin was 7 : 2 : 1 and this mixed solution was directly cast on the electrode. As for the operating conditions of the adsorption voltage and time, feed flow rate, desorption voltage and time of the feed solution NaCl 100 mg/L, the salt removal efficiencies (SRE) were measured. Apart from this NaCl, the $CaCl_2$ and $MgSO_4$ solutions were investigated in terms of SRE as well. Typically, SRE for NaCl 100 mg/L solution under the conditions of adsorption voltage/time, 1.5 V/3 min, desorption voltage/time -0.1 V/3 min, was shown 98%. And for the $CaCl_2$ and $MgSO_4$ solutions, the SREs of 70 and 59% were measured under the conditions of adsorption voltage/time, 1.2 V/3 min, desorption voltage/time -0.5 V/5 min, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.7
• /
• pp.1075-1077
• /
• 2004

• International Journal of Quality Innovation
• /
• v.1 no.1
• /
• pp.32-37
• /
• 2000

In an industrial process, the proper objective is to find the optimal operating conditions with minimum process variability around the target. Vining and Myers(1990) suggest to use the separate model for the mean response and the process varian linear predictor ${\tau}_i={\log}\;{\sigma}^2_i$ is unknown and should be estimated. Noting that the variance of $\hat{{\tau}_i}$ is heterogeneous, another appropriate D-optimality criterion $D_3$ based on the method of generalized least squares is proposed in this paper.