• Journal of the Korean Home Economics Association
• /
• v.37 no.12 s.142
• /
• pp.59-67
• /
• 1999

This study analyzed firefighter's actual wearing condition of turnout gear The results are as fellows: 1. When a firefighter is employed, Korea applies only the minimum of firefighters stature and weight but America applies both the minimum and the maximum. The choice of size is highly related with stature more than chest circumference. 2. The satisfaction degree of thermal barrier is very low, 3%. They used rubber gloves rather than heatproof gloves. This is more serious in small country like 'up', 'myun' than in cities. For laundering, they used sprinkling method with firefighting hose. Firefigthers hoped that their clothes could be classified tv the seasons and fire places. 3. frefighter had high unsatisfaction with the movement of hands and leges in the aspect of movement adjustability, air permeability, weight, body temperature regulation, and breathing in the hygenic aspect, fire resistance, thermal resistance property, water proof, chemical reactivity and electrical conductivity. Thev were also unsatisfied with water proof boots and gloves. They were generally satisfied with helmets but firefighters over 90kg of weight were rather unsatisfied. 4. The satisfaction degree for physical fitness was very low and the items with which they were not satisfied depend on physical features. 5. To develop turnout gear, they wanted changes in design, material and size. Reflection tape need to be replaced with high quality products and they wanted the use of velcro and zipper in fastening system.

• Journal of Korean Academy of Nursing
• /
• v.34 no.1
• /
• pp.182-190
• /
• 2004

Purpose: This study was conducted to understand the health status and health behaviors of preschoolers to provide baseline data for developing health promotion programs. Method: Parents of children attending day-care centers were recruited for the study. Participating day-care centers were selected using a stratified sampling method. Data was collected from June to August 2002 using a questionnaire. Result: Among 754 preschoolers, 17.3% were overweight, while 18.2% were underweight. The most frequent infectious diseases that children have had previously were hand-foot-mouth disease (20.2%) and chicken pox (18.7%). Current health conditions that children have frequently are respiratory disease (28%) and atopic dermatitis (23.8%). Only 61% brush their teeth everyday at bedtime, 54.3% wash their hands every time after returning home, 8.8% wear bicycle helmets, 9.3% use a child car seat, and 8.1% eat fruits and vegetables five times a day. Children residing in the metropolitan area were more likely to have positive health behaviors, and children of parents with an advanced college level education were more likely to have positive health behaviors than those with only a high school level education. Conclusion: Based on the study results, health professionals could plan and develop health promotion programs to change unhealthy behaviors of preschoolers targeting high-risk groups.

• Journal of the Korean Society of Safety
• /
• v.34 no.6
• /
• pp.1-6
• /
• 2019

Carbon fiber has excellent specific strength, corrosion resistance and heat resistance. And p-Aramid fiber has high toughness and heat resistance and high elasticity, and is used in various fields such as industrial protective materials, bulletproof helmets and vests, as well as industrial fields. However, carbon fiber is relatively expensive, and is susceptible to brittle fracture behavior due to its low fracture strain. On the other hand, the aramid fiber tends to decrease in elastic modulus and strength when applied to the epoxy matrix, but it is inexpensive and has higher elongation and fracture toughness than carbon fiber. Thus the twill hybrid carbonaramid fiber reinforced composite laminate composite was investigated for a delamination fracture toughness under Mode I loading by 2 kinds of MBT and MCC deduction. The specimen was fabricated with 20 hybrid fabric plies. The initial crack was made by inserting the teflon tape in the center plane with a₀/W=0.5 length. The results show that SERR(Strain Energy Release Rate) as the critical and stable delamination fracture toughness were 0.09 kJ/㎡, 0.386 kJ/㎡ by MBT deduction, and 0.192 kJ/㎡, 0.67 kJ/㎡ by MCC deduction, respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.5
• /
• pp.349-356
• /
• 2016

This study investigates the effects of convergence firefighter helmet attributes on consumer attitude toward the product and willingness-to-pay. The results of empirical analysis are as follows. First, consumer attitude toward the convergence product is more favorable when conciseness, economical efficiency, and the utility value of the convergence product's attributes are high, while consumer attitude toward the convergence product is less favorable when the perceived risk of the convergence product's attributes is high. Second, consumer willingness-to-pay for the convergence product is higher when conciseness, economical efficiency, and the utility value of the convergence product's attributes are high, while consumer willingness-to-pay for the convergence product is lower when the perceived risk of the convergence product's attributes is high. Based on our results, the implications are discussed for the further development of convergence products.

• Journal of Internet Computing and Services
• /
• v.20 no.3
• /
• pp.61-68
• /
• 2019

The goal of the construction work in the past was to improve the efficiency through cost reduction and shortening the construction period. However, the importance of safety management has recently been emphasized, and the Ministry of Employment and Labor has set a goal of reducing the number of deaths caused by industrial accidents by half. As a result, institutional and legal improvements are pursued and the need for safety is emphasized. However, most construction companies, except for some large construction companies, are lacking in safety management. So, In this paper, we design and implement a safety management system for construction site using smart helmets and beacons.

• Journal of Korean Society for Quality Management
• /
• v.47 no.2
• /
• pp.283-294
• /
• 2019

Purpose: Although the development of bulletproof helmets continues to be carried out, little has been improved in testing methods. Therefore, in this study, we studied the improvement of the test method of the domestic bulletproof helmet. Methods: The causes of head damage in the battlefield and the trends of bulletproof helmet development in developed countries were analyzed. In addition, improvements were derived by comparing the test methods of bulletproof helmet in Korea and the United States. Results: The results of the improvement by comparing the test methods of bulletproof helmet in Korea and the United States are as follows First, it is an addition to the scope of environmental treatment. Second, it is an addition to the level of protection. Third, the addition of the level of protection by impact. Conclusion: This study considered testing methods to prevent head injuries to shocks that cannot be identified by conventional methods. In addition, it considered testing methods for various threats by improving protection performance to advanced countries' levels.

• Journal of the Korean Society of Safety
• /
• v.34 no.2
• /
• pp.22-27
• /
• 2019

Bikers can be subjected to accidents during their bicycling. Helmets are only good, if any, for their head protection. A wearable airbag can protect the human neck area if it is properly designed. This airbag system is composed of an inflater and an airbag. The inflater contains a pressurized gas cylinder and a piercing device. The airbag is an inflatable fabric surrounding the human neck. When a bicycle accident happens, a sensor captures the motion of the biker and a microcomputer sends a signal to open a valve in the inflator to supply the pressurized gas to the airbag. An important issue of this system is that the airbag should be quickly inflated to protect the human neck. This paper deals with the airbag inflation time simulation and some issues to design a wearable airbag system. Also, a prototype was tested to show its feasibility using a human dummy mounted on a running cart.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.1
• /
• pp.9-15
• /
• 2021

The leading source of occupational fatalities is a portable ladder in Korea because it is widely used in industry as work platform. In order to reduce victims, it is necessary to establish preventive measures for the accidents caused by portable ladder. Therefore, this study statistically analyzed injury death by portable ladder for recent 10 years to investigate the accident characteristics. Next, to monitor wearing of safety helmet in real-time while working on a portable ladder, this study developed an object detection model based on the You Only Look Once(YOLO) architecture, which can accurately detect objects within a reasonable time. The model was trained on 6,023 images with/without ladders and safety helmets. The performance of the proposed detection model was 0.795 for F1 score and 0.843 for mean average precision. In addition, the proposed model processed at least 25 frames per second which make the model suitable for real-time application.

• Fashion & Textile Research Journal
• /
• v.24 no.4
• /
• pp.443-450
• /
• 2022

This study developed a three-dimensional helmet mold design software that can design helmets for treating the infant plagiocephaly (flat head syndrome) using three-dimensional head scan data. For this, the three-dimensional head data of sixth SizeKorea body measurement project as well as the data produced by a head modeling software were used to prepare the head shape data of plagiocephaly patients. A total of 14 landmarks and 10 dimensions of heads required for helmet mold shape design and plagiocephaly diagnosis were automatically measured using an anthropometric analysis software. Using the software developed in this study, plagiocephaly can be diagnosed not only visually by three-dimensional head data visualization but also quantitatively by calculating the medically defined indices such as cranial index, which measures the proportions of the head, and the cranial vault asymmetry index, which measures the asymmetry of the head. The basic shape of the helmet mold was automatically generated based on the head scan data. Additionally, it is possible to fine tune the shape of the mold to reflect individual characteristics by using a free form deformation technique. Finally, the designed helmet mold was converted into the data that can be printed on a three-dimensional printer for generating the actual prototype.

• The Journal of the Korea Contents Association
• /
• v.12 no.10
• /
• pp.82-92
• /
• 2012

This study is on the color expression of 100 male bike helmet products examining color image scale with high preference, PCCS color system applied color analysis and influence of color in decision making. The targets are all domestically distributed male bike helmets. The image scale was divided into 4 sections (Soft, Hard, Dynamic and Static) by color, and color image scale was analyzed to top 10 priority products. And analysis according to PCCS color system was made. Finally, questionnaire survey was carried out to analyze the influence of color on purchase decision making. The questionnaire survey was carried out to male in 20s~50s who were the member of 18 bike clubs in S agent in Seoul. 414 out of 422 sheets except for 8 insufficient ones were used. The results can be divided into 3.