• 복식
• /
• 제60권5호
• /
• pp.35-50
• /
• 2010

The purpose of this study was to know how helmet and armor was reinterpreted in historical play by considering general concept and type of old helmet and armor from the aspect of costume history and comparing the helmet and armor types of TV historical plays, Yeongaesomun and Taewangsasingi, whose historical backgrounds were based on the age of Goguryeo. The helmet and armor type shown in Yeongaesomun was reinterpreted as the one, which is close to historical investigation, by reappearing lamellar armor and jongjangpanju(helmet made of slim, long plate) shown in Goguryeo wall painting. The helmet and armor type shown in Taewangsasingi expresses fantastic helmet and armor by adding fantastic factor regardless of historical investigation. The study result reveals that there are several common characteristic factors between the helmet and armors of two historical plays. First, there was a classification in the display of character and story. The helmet and armor type shown in Yeongaesomun classified color and detail design depending on lamellar armor or character. In Taewangsasingi, the helmet and armor was manufactured depending on character's nature and the chain armors, which are lighter than existing helmet and armors, were usual. Second, they escaped from the historical investigation about traditional helmet and armor. In Yeongaesomun, myeonggwangae(a type of armor), which might be popular, was not expressed and Taewangsasingi is free from an imperative idea of historical investigation by manufacturing helmet and armor referring to that of ancient Rome age. The modern sense was reflected to increase dramatic effect. The helmet and armor of Yeongaesomun provides modern feeling by using stainless steel material and modern color arrangement and that of Taewangsasingi is designed in modern, splendid way as it aimed at game development from the planning step.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.245-248
• /
• 2005

In this paper, small sized half-wavelength circular loop antenna which attached beneath a visor of helmet is designed and fabricated at the resonant frequency of 449MHz. To reduce the size of the antenna, double series-shorted stubs are inserted inside the loop for practical use of a vacant space of loop inside. Also, It is designed for the printed type to install the helmet easily. The size of antenna on helmet is reduced to 87.75%(diameter : 70mm, height :.36mm) compare with general type antenna(diameter : 200mm height 101mm). The return loss, -10dB bandwidth and gain are -13.2dB, 17.6MHz(3.9%), and -1.78dBd. And, radiation pattern is omni-directional pattern at H-plane. Therefore, it can be seen that the half-wavelength circular loop antenna using double series-shorted stubs is proper structure for the miniaturization and the installed antenna of the helmet.

• 복식
• /
• 제61권2호
• /
• pp.32-46
• /
• 2011

The study researched the characteristic of helmet and armor reflecting Joseon Dynasty by focusing on the helmet and armor appearing in dramas, the Tear of Dragon and King Sejong, whose common point is the historical background, the early Joseon Dynasty, among the historical dramas, which are manufactured on the basis of historical person or age. First, the helmet and armor appearing in historical drama was reproduced on the basis of historical record depending on age. In the early Joseon Dynasty, helmet was classified into cheomju and wonju and armor was classified into chalgap, swaejagap, gyeongbeongap, dujeonggap and dudumigap. In drama, the Tear of Dragon and King Sejong, for helmet, cheomju and wonju were used and for armor, chalgap, dujeonggap and dudumigap, whose type and manufacture method were similar to that of historical record, were reproduced. Second, the helmet and armor appearing in historical drama searched for function. In drama, the Tear of Dragon, rather than heavy iron, plastic and textile were used and the metal scale inside armor was removed. In drama, King Sejong, the weight of armor was decreased by removing the metal scale inside armor and easy wearing was secured by using velcro. Third, the helmet and armor appearing in historical drama expressed various dramatic interpretations. In drama, the Tear of Dragon, the same color as that of armor was adopted for helmet to provide stable and unified feeling. Visually splendid display was added to armor by matching powerful prime color and glossy metal. In drama, King Sejong, modem sense was added to helmet and armor by actively using pastel color reflecting modem fashion.

• 한국항공우주학회지
• /
• 제45권5호
• /
• pp.417-428
• /
• 2017

본 논문에서는 항공기 조종사 지능형 헬멧시현시스템(IHDS, Intelligent Helmet Display System)의 아키텍쳐 설계, 단위 구성품 설계, 핵심 소프트웨어 설계내용(헬멧 자세추적, 고도오차 보정 소프트웨어)을 기술하며, 단위시험 및 통합시험에 대한 결과를 기술한다. 세계적인 최신 헬멧시현시스템 개발 추세를 반영하여 3차원 전자지도 시현, FLIR(Forward Looking Infra-Red) 영상시현, 하이브리드형 헬멧자세추적, 바이저 반사형광학계, 야시카메라 영상시현 및 경량 복합소재 헬멧쉘 등의 사양을 설계에 적용하였다. 특히 3차원 전자지도 데이터의 고도오차 자동보정 기법, 고정밀 영상정합 기법, 다색(Multi-color) 조명광학계, 회절소자를 이용한 투과형 영상발광면, 헬멧자세 추정시간을 최소화하는 추적용 카메라, 장/탈착형 야시카메라, 머리 밀착용 에어포켓 등의 신개념의 설계를 제안하였다. 모든 시스템 구성품의 시제작을 완료한 후 단위시험과 시스템 통합시험을 수행하여 기능과 성능을 검증하였다.

• 한국안전학회지
• /
• 제38권3호
• /
• pp.85-92
• /
• 2023

A safety helmet is considered the last gear to protect workers from harmful and dangerous events occurring on industrial sites. Recently, interest in the importance of personal protective equipment design reflecting individual characteristics has been emphasized to improve usability and convenience. However, it has been found that if it is inconvenient to wear or has poor work efficiency, it will not be used well or will be used incorrectly. In this study, an investigation was performed with 35 questions, direct observation, and intensive interviews of construction workers to determine the inconvenience and problems of wearing safety helmets. Moreover, managers of 9 construction sites in 6 cities were asked about the performance and design of safety helmets. As a positive answer, it was found that the brim (awning) of the safety helmet was shortened to give the safety glasses a light-shielding function. In addition, an upward adjustment all-in-one type safety helmet was requested. On the other hand, it was revealed that negative answers felt uncomfortable due to the brim (awning) on the front of the helmet. Based on the survey results, a new helmet model suitable for construction site activities was presented, and wearability improvement determinants were discovered through performance and design improvement.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1569-1575
• /
• 2012

본 논문은 AUTODYN-3D 프로그램을 이용한 방탄 헬멧의 탄도충격에 관한 연구를 하였다. 두 가지 유형의 재료가 방탄 헬멧에 사용되었다. Kevlar 및 Steel/Kevlar 혼합복합재 이다. 강구와 7.62 mm 금속피복탄이 시뮬레이션에서 사용되었다. 시뮬레이션에서 발사체의 변형된 형상과 내부에너지가 계산되었다. 결과는 Steel/Kevlar 헬멧을 관통하기 위해 요구되는 충격속도는 강구와 7.62 mm 금속피복탄에 따라 각각 655 m/s 와 845 m/s 이상이다. 결과로부터 Kevlar 와 Steel/Kevlar 헬멧 사이의 탄도 저항에 큰 차이를 볼 수 있었다. NIJ-STD-0106.01 Type II헬멧에 대한 시뮬레이션으로 충격 속도 358 m/s 의 7.62 mm 금속피복탄이 사용되었다. 시뮬레이션 결과는 Steel/Kevlar 헬멧이 충격 속도 358 m/s 의 7.62 mm 금속피복탄을 방어할 수 있는 것으로 나타났다.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.101-108
• /
• 2016

This study was initiated to minimize head injuries, which is the largest cause of increased external activity, traffic accident injuries, and death. We developed a low cost airbag that can be covered by a safety helmet based on consumer needs. The results of the survey showed that safety is the most important aspect of consumers' safety helmets. It also predicted that increasing the weight would present the biggest problem. Curved airbag cushion parts that can be attached to a helmet and the sensor part of a block type were designed. Impact analysis was performed by specifying the pressure inside the airbag and the volume of the airbag as variables.

• 한국의류학회지
• /
• 제41권4호
• /
• pp.771-781
• /
• 2017

The helmet is an imperative personal protective equipment. This protective device must be able to guard the human head against potential risks. Helmets are classified according into the purpose of use; therefore, the required performance and specifications depend on the type of products. Military helmets are intended to protect the wearer's head from bullets and shrapnel. Generally, lightweight super fibers and fiber reinforced composite materials are used as helmet shell materials, and NIJ STD of U.S. Department of Justice is most widely used as international standard related to bulletproof helmets. Safety helmets are widely used for industrial application and sports leisure. In general, the performance of shock absorption must be ensured, and various lining systems are applied in material, design, and combination methods. Evaluation standards have also been classified and strictly controlled for each purpose; therefore, it is difficult to certify with the existing standards such as the recently developed convergence helmets. However, it is possible to launch the product through a separate national integrated certification procedure.

• 천문학회지
• /
• 제39권4호
• /
• pp.139-145
• /
• 2006

We have made a comprehensive statistical study on the coronal mass ejections(CMEs) associated with helmet streamers. A total number of 3810 CMEs observed by SOHO/LASCO coronagraph from 1996 to 2000 have been visually inspected. By comparing their LASCO images and running difference images, we picked out streamer-associated CMEs, which are classified into two sub-groups: Class-A events whose morphological shape seen in the LASCO running difference image is quite similar to that of the pre-existing streamer, and Class-B events whose ejections occurred in a part of the streamer. The former type of CME may be caused by the destabilization of the helmet streamer and the latter type of CME may be related to the eruption of a filament underlying the helmet streamer or narrow CMEs such as streamer puffs. We have examined the distributions of CME speed and acceleration for both classes as well as the correlation between their speed and acceleration. The major results from these investigations are as follows. First, about a quarter of all CMEs are streamer-associated CMEs. Second, their mean speed is 413 km $s^{-1}$ for Class-A events and 371 km $s^{-1}$ for Class-B events. And the fraction of the streamer-associated CMEs decreases with speed. Third, the speed-acceleration diagrams show that there are no correlations between two quantities for both classes and the accelerations are nearly symmetric with respect to zero acceleration line. Fourth, their mean angular width are about $60^{\circ}$, which is similar to that of normal CMEs. Fifth, the fraction of streamer-associated CMEs during the solar minimum is a little larger than that during the solar maximum. Our results show that the kinematic characteristics of streamer-associated CMEs, especially Class-A events, are quite similar to those of quiescent filament-associated CMEs.

• 대한인간공학회지
• /
• 제34권5호
• /
• pp.501-517
• /
• 2015

Objective: The aim of this study was to investigate the technology trend on developing helmets based on the analysis of Korean, US, European and PCT patents. Background: The usage of the personal protective equipment such as the safety helmet would be essential for preventing injuries and reducing the severity of injuries depending on the type of activity and the exposed environment. Method: Database of WIPSON was used for searching the patents. The objects were the Korean, US, European and PCT patents registered or opened from January 2011 to December 2014. The keyword to investigate was helmet, and International Patent Classification (IPC) was used for investigating the technology trend of the patents. Results: The cases of US patents annually increased, but the cases of European patents decreased. US patents belonged to all sections but Korean and European patents and PCT patents did not. The largest number of IPC, to which four areas' patents belonged, was 'Headwear' and the second largest one was 'Hygiene'. In the subgroup level, the most common largest subgroups were 'Parts, details or accessories of helmets' and 'Masks, shields, or hoods for welders'. Korean patents had the lowest ratio of single_IPC at 11%, but the ratios of single_IPC for US and European patents were 52%, respectively. 'Human necessities', 'Mechanical engineering', 'Physics', and 'Electricity' were used as a single_IPC, but lower levels of 'Performing operations', 'Chemistry', 'Textiles' and 'Fixed constructions' were used as multi_IPC. Most main applicants had patents which belonged to 'Human necessities'. Conclusion: The cases of US patents annually increased unlike others. The common technologies for creating the helmet were Parts of helmets under Headwear and Shields for welders under Hygiene. Many Korean patents tended to be categorized as multi_IPC, different from others. Application: To know the technological characteristic of patents would be helpful to initial stage developers.