• Journal of environmental and Sanitary engineering
• /
• v.16 no.3
• /
• pp.80-86
• /
• 2001

This research was carried out to investigate the effect of microscopic silica matrix coagulation on heavy metals and anion removal in mining wastewater. pH and alkalinity played an important role to coagulate heavy metals such as Al, and Fe and an anion such as ${SO_4}^{2-}$ with silica matrix as well as NaOH. However, the efficiency to form coagulates was much greater in silica matrix-treated wastewater than NaOH-treated one. Fe in wastewater formed coagulation with both silica matrix and NaOH treatments resulting in lowering Fe content in wastewater at above pH 9. For Al removal in wastewater, silica matrix-treated wastewater at above pH 12.3 formed stable coagulate with Al, while NaOH-treated one did not. Alkalinities of 89 and 220 mg/L were required to stabilize silica matrix treated coagulate with Fe and Al, respectively. Reaction time of ten minute was required to provide enough reaction for coagulation between heavy metals and silica matrix. Heavy metals and anion leachates were much lower in coagulate with silica matrix than that with NaOH, which indicates that silica matrix could be used to remove heavy metals efficiently.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.2
• /
• pp.129-133
• /
• 2014

BACKGROUND: This study was performed for selecting yeast mutants with a high tolerance for targeted metals, and determining whether yeasts strains tolerant to multiple heavy metals could be induced by sequential adaptations. METHODS AND RESULTS: A mutant yeast strain tolerant to the heavy metals cadmium (Cd), copper (Cu), nickel (Ni), and zinc (Zn) was selected by sequential elevated exposures to each metal with intermittent mutant isolation steps. A Cd-tolerant mutant was isolated by growing yeast cells in media containing $CdCl_2$ concentrations that were gradually increased to 1 mM. Then the Cd-tolerant mutant was gradually exposed to increasing levels of $CuCl_2$ in growth media until a concentration of 7 mM was reached, thus generating a strain tolerant to both Cd and Cu. In the subsequent steps, this mutant was exposed to $NiCl_2$ (up to 8 mM), and a resultant isolate was further exposed to $ZnCl_2$ (up to 60 mM), allowing the derivation of a yeast mutant that was simultaneously tolerant to Cd, Cu, Ni, and Zn. CONCLUSION: This method of inducing tolerance to multiple targeted heavy metals in yeast will be useful in the bioremediation of heavy metals.

• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.51-59
• /
• 1999

Chemical composition of atmospheric aerosols was measured at 4 sites in Pusan. All the samples were collected with a high volume air sampler from January to October 1996, to analyze major ions and heavy metals. Dominant ions of aerosols were S $O_4$$^{2-}$ in anion and N $a^{+}$ in cation. Sulfate, nitrate and ammonium ions in aerosols showed high enrichment factor to soil and seawater composition. The concentrations of heavy metals in aerosols was lowest at the site PI near the coast. The lowest concentrations of major ions and heavy metals mainly appeared in August, probably due to scavenging by frequent rains. Especially, the concentrations of total suspended particulate matter(TSP) and heavy metals in aerosols showed good correlations in Pusan. Based on crustal Al, enrichment factors for some metals(Zn, Cu, Pb, Cd) in aerosols were significantly greater than unity, and the order was Cd ＞ Pb ＞ Zn ＞ Cu. This evidence suggests that Cd and Pb are derived predominantly from non-crustal sources.s.

• Journal of Environmental Science International
• /
• v.2 no.1
• /
• pp.69-78
• /
• 1993

Contents of heavy metals (Cr, Cu, Zn, Cd, and Pb) in the sediments of Ulsan Bay were investigated by the sequential extraction methods that classifies heavy metals into five types of chemical forms: exchangeable, bound to carbonates, bound to Fe-Mn oxides, bound to organic matter and residual. The analyses were determined by using an ICP-MS. Total Cr concentrations in the sediments were in the range of 41.6-96.4, Cu 60.7-680, Zn 189-1954, Cd 33.1-83.4, and Pb 138-567 mg/kg. Results of sequential fractionation indicates that relatively high proportion ( ~44%) of Cu is associated with organic matter. A large proportion of Pb is associated with three types of chemical forms: Fe-Mn oxides, organic matter, and residual. There were significant correlation in concentrations between the exchangeable components and total organic carbons. The heavy metals In the residual phase cannot be easily released to the environment since these are bound to the crystal lattice. But, reducible and organic Phases con a significant amount of most heavy metals. Therefore, there is Potential dancer of a substantial amount of metals becoming chemically mobile with environmental changes.

• Journal of Life Science
• /
• v.15 no.5 s.72
• /
• pp.826-833
• /
• 2005

This study was conducted to inform basic data for management of abandoned mine that was based on soil heavy metal concentration of the non-rearing and the rearing sites in Guundong Mine which had been completed of improve contamination soils, and examined into standard plant which had tolerances about pollution that analyzed into its accumulated heavy metals contents in the wild plant of naked soil. Consider form the result of contents by depth of soils heavy metals in the non-rearing sites, S1 point judged by contaminated to heavy metals of tailing leach after weathering caused by rainfall and permeate in S1 point soils when restored rest of tailing in 1996 restoration project. Lead of S2 point was not contaminated seriously by restoration and S3 point considered that heavy metals which leach by rainfall in the contaminated soils in mine vicinity accumulated in the abandoned paddy through river When heavy metals of rearing sites soils were examined from the view point of upside of mine point (SP1, SP2, and SP3) of same above the sea level, zinc (537.5 mg/kg) content of SP1 point was highest, and copper (535 mg/kg) and lead (141.5 mg/kg) in the SP3 point were high. To considered as orderly plenty of heavy metals in the plant were respectively in order, Perilla frutescens var. cauta KUDO (SP1 and SP4) >Artemisia princeps PAMPAN (SP2) > Miscanthus sinensis ANDERSSON(SP5) > Vicia angustifolia var. segetilis (THUILL.) K. KOCH. (SP2). Especially, there were plenty of heavy metals in P. frutescens var. acuta, so it judged as a standard plant which have tolerances about heavy metals pollution sites. Therefore, we need more study about the heavy metals accumulate ability of P frutescens var. acuta in future.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.12
• /
• pp.15-24
• /
• 2014

This study was performed to investigate the removal characteristics of heavy metals in Acid Mine Drainage (AMD) using pellet-type Zeolite-StarFish ceramics (ZSF ceramics), in which natural zeolite and starfish were mixed and calcined with wood flour. Kinetic experiment showed the removal reaction of heavy metals by ZSF ceramics reached the equilibrium status within 3 hours. The optimal calcination temperature range for removal of heavy metals was measured to be $800{\sim}1,000^{\circ}C$. The calcination time had little effect on the removal of heavy metal in AMD. The adequate dose of ceramics was shown to be 1.0~1.2 % for removal of heavy metals in AMD. High removal efficiencies of heavy metals (Al, As, Cd, Cu, Fe, Mn, Zn) in AMD, more than 95 % except for Pb, were obtained under the condition of dose of ceramics more than 1.0 %. The removal efficiencies of heavy metals increased with increasing mixing concentration of wood flour. The adequate mixing concentration of wood flour was observed to be 10 %. The batch experimental results exhibited that the ZSF ceramics could act as an efficient ceramics for removal of heavy metals in AMD and the wood flour could provide porous ZSF ceramics with enhanced removal efficiency of heavy metals.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.358-363
• /
• 2005

A large amount of oyster-shell waste has been illegally disposed at oyster farm sites along the southern coast of Korea, which already created serious environmental problems. Therefore, the study was undertaken to increase the consumption of oyster shell meal as a soil amendment. The effects of oyster shell meal on dynamics of heavy metals and uptake of heavy metals by spring Chinese cabbage were evaluated in silt loam soil (in Gyeongsang National University, Jinju, Gyeongnam-do, Korea), where 0, 4, 8, 12 and 16 Mg $ha^{-1}$ oyster-shell meal fertilizer were added. Lime treatment (2 Mg $ha^{-1}$) was selected as a control. In the results of this study, cabbage yields were increased by increasing levels of oyster-shell meal fertilizer. With increasing levels of oyster-shell meal fertilizer, total heavy metals concentrations were not significant among treatments. However, 0.1N HCl extractable heavy metals concentration was significantly reduced due to increasing of soil pH. A lot of portion (ca. $80{\sim}90%$) heavy metals fraction of all fractions was residual phase in soil after harvesting. The contents of Cu, Mo, Zn in cabbage were slightly increased by increasing levels of oyster shell meal fertilizer. However, there were no toxic symptoms of heavy metals during cultivation. Conclusively, it was estimated that oyster shell fertilizer could be a good amendment to increase productivity of crop and reduce uptake of heavy metals by crop and mobility of heavy metals in soil.

• Korean Journal of Veterinary Service
• /
• v.22 no.1
• /
• pp.1-7
• /
• 1999

This study was performed to investigate the contents of the heavy metals such as cadmium(Cd), copper(Cu), iron(Fe), lead(Pb) and zinc(Zn) in meat and meat products. For this experiment, each 20 samples of beef and pork were collected at slaughterhouse in Seoul areas and 45 samples of meat products(ham, sausage, processed meat and seasoned meat) were purchased from commercial food markets. The contents of the heavy metals was determined by atomic absorption spectrophotometry from Jan. to Nov. In 1998. The results obtained were summarized as follows ; 1. In Korean native beef, mean values of the heavy metals(mg/kg) were Pb : 0.14$\pm$0.10, Cd : 0.07$\pm$0.02, Cu : 1.73$\pm$0.95, Zn : 42.82$\pm$8.17 and Fe : 67.43$\pm$24.18, respectively. 2. In imported beef, mean values of the heavy metals(mg/kg) were Pb : 0.03$\pm$0.08, Cd : 0.06$\pm$0.02, Cu : 1.41$\pm$0.62, Zn : 42.93$\pm$4.95 and Fe : 40.06$\pm$12.77, respectively. 3. In pork, mean values of the heavy metals(mg/kg) were Pb : not detected, Cd : 0.09$\pm$0.02, Cu : 1.08$\pm$0.23, Zn : 19.49$\pm$6.02 and Fe : 30.21$\pm$10.51, respectively. 4. In ham, mean values of the heavy metals(mg/kg) were Pb : trace, Cd : trace, Cu . 1.19$\pm$0.46, Zn : 13.58$\pm$4.99 and Fe : 31.43$\pm$11.74, respectively. 5. In sausage, mean values of the heavy metals(mg/kg) were Pb : 0.15$\pm$0.34, Cd : 0.08$\pm$0.05, Cu : 1.15$\pm$0.46, Zn : 13.70$\pm$7.13 and Fe . 27.28$\pm$15.05, respectively. 6. In processed meat, mean values of the heavy metals(mg/kg) were Pb : 0.08$\pm$0.13, Cd : 0.09$\pm$0.04, Cu : 1.28$\pm$0.60, Zn : 14.72$\pm$7.09 and Fe : 24.04$\pm$10.33, respectively. 7 In seasoned meat, mean values of the heavy metals(mg/kg) were Pb : 1.05$\pm$2.21, Cd : 0.13$\pm$0.03, Cu : 1.06$\pm$0.16, Zn : 17.53$\pm$8.72 and Fe : 26.76$\pm$9.02, respectively.

• Toxicological Research
• /
• v.24 no.4
• /
• pp.297-305
• /
• 2008

This study was carried out to measure the concentration of heavy metals (Pb, Mn, Cr, Cd, Ni, Zn, and Cu) in water and Bolti fish (Tilapia nilotica) samples collected from Rasheed branch of River Nile, north of El-Giza Governorate, Egypt by atomic absorption spectrophotometry. The investigated districts through which the branch passes include El-Manashi, Gezzaya, El Katta, Abo Ghaleb and Wardan. Based on WHO and FAO safety reference standards, the results of the current study showed that water and fish tissues were found to contain heavy metals at significantly variable concentration levels among the investigated districts. They were polluted with respect to all the metals tested at Gezzaya district. However, the levels of analyzed metals in water and fish tissues were found lower than legal limits in other districts. The heavy metals showed differential bioaccumulation in fish tissues of the different districts as the accumulation pattern (as total heavy metal residues) was district dependant as follow: Gezzaya > Wardan > El Katta > Abo Ghaleb > El Manashi.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.3
• /
• pp.71-79
• /
• 1999

The Hg, Cd, Cu, Mn, and Zn in bottom sediments of han river and their tributaries were analyzed to evaluate the seasonal variations of heavy metals. Leaching tests were also performed for estimation of availability of heavy metal retention in sediments. Sediments of Anyang stream showed the highest concentration of heavy metal in the sediment samples. Heavy metal concentration was heavily depended upon the heavy metal source of tributaries of han river and particle distribution. Clay and silt had higher concentration of heavy metals than very fine san and fine sand due to difference of retention capability of heavy metal. The highest concentration of heavy metal was observed in bottom sediments irrespective of sites investigated. Heavy metals and ignition loss showed positive relations, and higher relationships with p-value <0.01 were observed between copper and lead. copper and zinc, and depended on the pH condition of leaching test, and leachated fraction increased with decrease of the pH.