• Journal of Korea Port Economic Association
• /
• v.27 no.3
• /
• pp.179-206
• /
• 2011

Masan Port, which is a main entrance to Korea, has undergone the tough time these days. Many problems are mainly due to the deterioration of harbor facilities, the shortage of waterfront area and the decrease of the trading volumes. Especially the trading volumes are seriously affected by the Busan New Port, which was not only very close to the Masan Port but constructed in a large scale. For the Masan Port to develop continuously, therefore, it is vital to modernize harbor facilities, redevelop the old harbor, expand its waterfront, construct green port and develop harbor for sightseeing. At the same time, Masan port should be ready to develop a higher value added port. To vitalize Masan port's economy, we have to push forward a differentiation strategy that makes Masan port specialized harbor for distributing goods like hard and heavy cargo.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.3
• /
• pp.198-204
• /
• 2007

In mobile robotics, ultrasonic sensors became standard devices for collision avoiding. Moreover, their applicability for map building and navigation has exploited in recent years. In this paper, as the preliminary step for developing a multi-purpose autonomous carrier mobile robot to transport trolleys or heavy goods and serve as robotic nursing assistant in hospital wards. The aim of this paper is to present the use of multi-sensor data fusion such as ultrasonic sensor, IR sensor for mobile robot to navigate, and presents an experimental mobile robot designed to operate autonomously within both indoor and outdoor environments. The global map building based on multi-sensor data fusion is applied for recognition an obstacle free path from a starting position to a known goal region, and simultaneously build a map of straight line segment geometric primitives based on the application of the Hough transform from the actual and noisy sonar data. We will give an explanation for the robot system architecture designed and implemented in this study and a short review of existing techniques, Hough transform, since there exist several recent thorough books and review paper on this paper. Experimental results with a real Pioneer DX2 mobile robot will demonstrate the effectiveness of the discussed methods.

• Journal of the Korea Safety Management & Science
• /
• v.23 no.3
• /
• pp.1-9
• /
• 2021

Crane is an important equipment for the transport of heavy goods in industrial sites, but it is also known as one of the most fatal machines. In order to reduce crane accidents, it is necessary to minimize human errors during crane operations. To achieve this, ergonomic design principles are recommended to be reflected from the crane design stage. The study analyzed the safety certification standards for crane that should be fulfilled at the crane design and manufacturing stage. This study selected five representative ergonomic design principles (feedback, compatibility, consistency, full-proof, and fail-safe) by surveying heuristic evaluation principles that are widely used for usability evaluation in early design stage. Next, the principles were applied to the safety certification standards to identify insufficient clauses. This study identified 12 insufficient clauses out of 119 in the current safety certification standards for crane and discussed their improvement directions to comply the ergonomic principles. The analysis results of this study can help of improving the safety certification standards and the method used in this study can also be applied to identify insufficient clauses in the safety certification standards for other industrial machines such as press machine and lift.

• Journal of the Korean Home Economics Association
• /
• v.32 no.5
• /
• pp.165-182
• /
• 1994

Korea's clothing industry which has been country's leading export industry and basic strategical industry is now faced with many difficulties both domestically and internationally. Domestically it is faced with continuing shortage of manpower in both production line and management high labour cost causing increase in price putting more weight on behavior of consumers resulting in change of industrial environment and continuing structural problems of industry itself. Internationally it is faced with strengthening of import regulations and protectionism of developed countries and rapid emergence of underdeveloped countries as leading exporting nations. In reality export plays the most essential role in our economy and is especially sensitive to the external environmental factors. Already economic bloc phonomenon can be seen everywhere and is continuing to accelerate in place such as E. U in Europ, North & South America as NAFTA, and South East Asian contries which recent tendency of economic unity effort is present. These countries of such economic blocs are imposing heavy custom duties reinforcing provision of country origin and acting out strict inspection regulations in order to protect the interest of their own industry. Therefore it is vital to manufacture excellent quality goods For these reasons study in this area has brought attention in Korea as well as worldwide in the recent years. Apparel industry which requires professional technology and ability is the most competitive international business. In order to challenge the international market the high level of intelligence is most required to produce high quality goods. The purpose of this study is to analyze the relationship between functions and roles of marketing and to approach problems in more efficient manner. Apparel industry is composed of various programs such as design pattern making merchandising and textile science. To succeed in the business is to give the highest satisfaction to the targeted market. Hence this study will example the factors that determine the Cost Quality and Performance of apparel products. The study will involve following steps; firstly establish relationship between the quality concept and productivity of apparel products Secondly inquire in to marketing strategy laying stress on apparel production related factors focusing on merchandising marketing production and operations Thirdly prospect 21st century apparel industry focusing on garment production and trade and also other countries structural improvement Fourthly establish the new dimension of competitive factors by grasping the actual circumstance of Korea's apparel industry in the international market. The research method will include; First reality approach method by analysing the present state of industry Second literal analysis such as marketing comparisons between leading apparel exporting countries.

• Journal of the Korean Society of Safety
• /
• v.28 no.6
• /
• pp.49-56
• /
• 2013

The statistics of recent accidents in warehouses show that a heavy toll of lives were produced by various accidents, e.g. collision, overturn, fall, slip, exposure to harmful substances or environments, etc. Of significant concern amongst them is the collision, especially the collision between forklift and storage rack structure. Accordingly, this study focuses on behavioral characteristics of rack structure subjected to dynamic impact loading of a forklift. For this purpose, time-domain response analysis has been performed on a standard 2-bay six-story rack structure consisting of columns, beams and bracing members with perforated open section. In order to investigate the most critical scenario, the impact loads are applied in both down-aisle and cross-aisle directions, and the impact locations are also varied along the shelves of the palettes. In order to deal with storage distributions, three types of rack structures are further taken into account: original empty rack structure with no storage, half-loaded rack structure and fully-loaded rack structure. The numerical simulation results demonstrate that the dynamic characteristics of the rack structure are significantly dependent on the distribution of the storage goods and its natural period varies from 0.24sec to 1.06sec, approximately 4.4 times. Further, the parametric studies show that the forklift impact is most critical to the safety of the rack structure when it collides either at the base or at the top of the rack structure.

• Journal of the Korea Institute of Construction Safety
• /
• v.2 no.2
• /
• pp.63-69
• /
• 2019

Building Construction projects are getting higher and larger. Therefore, the use of Tower Crane, which is more productive than any other lifting plan shows a trend of continuous increases. However as equipment for transporting heavy goods, are is too expensive for the monthly rent and used inefficiently for construction. site so it is analyzed that it has problems of reducing productivity and efficiency of lifting work. Inefficient situations are arising like poor communications between operator and worker, occurrence of blind spots, securing the shortest distance of fire during movement after lifting plan, influences of weather, location of materials, movement radius of tower crane by each locations and ever-changing working environments. Therefore, in this study, we first made a list of tower cranes that are inefficiently used at the site, and then we made a checklist. After that, through field visits, we derived checklist for Tower Crane to comprehensive data value.

• Journal of the Korean association of regional geographers
• /
• v.17 no.2
• /
• pp.216-230
• /
• 2011

Coal briquette manufacturers once served as major fuel suppliers for households. For the coal briquette industry, transportation accounts for a considerable portion of the total manufacturing cost as briquettes are heavy in weight but low in value-addition. Moreover, they were put under strict control by the government for the characteristics of the briquettes as public goods. This study intends to identify the factors of and the types of the location of coal briquette manufacturing industry. In particular, the focus of the study is the briquette manufacturers in Seoul. Moreover, this study aims to identify how government policy influenced the location of the industry. The coal briquette manufacturing industry in the example regions were oriented toward the market and trans-shipment points. Simultaneously, the industry underwent spatial changes due to the spatial policy. While derived spatial policies were significant factors for growth of coal briquette industry, explicit spatial policies only modified or facilitated some of the location features resulting from the characteristics of the industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.525-530
• /
• 2006

Recently companies which do not use the heavy metals such as lead, chrome, mercury to the electronic goods and alternate the materials environment-friendly are increasing. In advanced country, lead-free solder without lead is developed and soldering process almost disappeared. The lead-free solder is environment-friendly but is expensive and lack of tack and durability than lead, the improvement is necessary. To solve this problem, the welding process that uses TIG welding and the welding technology between different kind metals for lead-in wire of room lamp and base department was developed. To do this, previous room lamp manufacturing process was analysed and which process can be alternate was proposed. And the test for selection of optimal value of TIG welding parameter was done. Finally the lamp aging test and earthquake resistant test was done to check the reliability of welded room lamp.

• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.87-94
• /
• 2018

The purpose of this study is to explore the essential meaning of Deokhu's culture in adolescent as a play space on Cyber. A phenomenological research method guided data collection and analysis. Qualitative research methods collected from 18 in - depth interviews using semistructured question types for 13 to 17 year - old adolescents living in Seoul Jamsil. As a result, As a result, adolescent's Deokhu culture started by stress and social and emotional desire, and especially it was utilized as a play space on the cyber of purchase activity of fandom and goods around SNS activities. This has a positive effect on self-awareness as well as self-identity formation. Above all, the shortage of play time due to heavy school entrance and the lack of socially provided play space make the cyber space as another play space for the adolescents.

• Journal of Korea Port Economic Association
• /
• v.23 no.3
• /
• pp.103-126
• /
• 2007

As a result of the development of heavy and chemical industries during the Economic Development Plan, Korean shipbuilding industry expanded its capacity rapidly and became a strategic export industry. The 1973 Arab oil crisis and the subsequent doubling of oil prices greatly reduced world demand for tankers and the market was crashed as numberous orders for tankers were cancelled in Japan and Europe. Under these circumstances, Korean Shipping industry also experienced a decrease in overseas demand for shipbuilding. The Korean government established the 'planned shipbuilding' scheme. The primary purpose of the scheme was to develop the shipbuilding industry, to link the industry to the shipping industry and to develop both industries together. However, Japanese shipping established goals linking with macro-national economic policy, such as saving foreign currencies and freight of importing goods, also assisting reconstruction and development of shipbuilding industry. To accomplish these goals, Japanese government used several policy tools such as financial assistance, law, guidance.