Aim of this study is to investigate an aerodynamic effect of a drag-reducing device on a heavy-duty truck. The vehicle experiences two different kinds of aerodynamic forces such as drag and uplifting force (or downward force) as it is traveling straight forward at constant speed. The drag force on a vehicle may cause an increase of the rate of fuel consumption and driving instability. The rolling resistance of the vehicle may be increased as result of the negative uplifting or downward force on the vehicle. A device named roof-fairing system has been applied to examine the reduction of aerodynamic drag force on a heavy-duty truck. As for a engineering design information, the drag-reducing system should be studied theoretically and experimentally for the best efficiency of the device. Four different types of roof-fairing model were considered in this study to investigate the aerodynamic effect on a model truck. The drag and downward force generated by vehicle has been obtained from numerical calculation conducted in this study. The forces produced on four fairing models considered in this study has been compared each other to evaluate the best fairing model in terms of aerodynamic performance. The result shows that the roof-fairing mounted truck has bigger negative uplifting or downward force than that of non-mounted truck in all speed ranges, and drag force on roof-fairing mounted truck has smaller than that of non-mounted truck. The drag coefficient $(C_D)$ of the roof-fairing mounted truck (Model-3) is reduced up to $41.3\%$ than that of non-mounted trucks (Model-1). A downward force generated by a roof-fairing mounted on a truck is linearly proportional to the rolling resistance force. Therefore, the negative lifting force on a heavy-duty truck is another important factor in aerodynamic design parameter and should be considered in the design of a drag-reducing device of a tractor-trailer. According to the numerical result obtained from present study, the drag force produced by the model-3 has the smallest of all in all speed ranges and has reasonable downward force. The smaller drag force on model-3 with 2/3h in height may results of smallest thickness of boundary layer generated on the topside of the container and the lowest intensity of turbulent kinetic energy occurs at the rear side of the container.
Railway bridges are divided into ballastless and ballast track bridges. The ballast abrasion occurs on the ballast track upon bridges more than soil roadbed because the track vibration occurs a lot in the ballast track upon bridges due to girder vibration when a train's weight is loaded onto track even though the identical ballast is used. The phenomena of mud pumping especially, which occurs when drainage is not properly secured for heavy rain, leads to the increase of maintenance work load and the decline of ride comfort. There are countermeasures such as ballast change, installation of cross-drainage for poor drainage, gutter establishment, ballast lifting methods, ballast mats and resilient sleepers laying for the mud pumping. The ballast thickness range in domestic railroad construction rule is uniformly set up according to the design speed of railroad and passing tonnage of train without considering field conditions which is considered in foreign railroad companies. The purpose of this study is to verify the effect of vibration decrease by measuring the acceleration, displacement and ride comfort of ballast track with the change of ballast thickness on the ballast track bridges and to suggest the optimal height of ballast on the Yocheon Bridge built for the test in Honam Line.
Recent studies suggest that prolonged standing at work is associated with varicose veins (VV). The objective of this study was to analyze the differences of VV risk in terms of work types in casino dealers and hotel service workers. Symptoms of VV were evaluated using a self-reported questionnaire from 2,092 participants, and muscle fatigue in the lower legs were evaluated using surface electromyography. The shift rate of median frequency in Gastrocnemius was -30.0% among the casino dealers working in prolonged static standing posture, and - 14.3% among the casino dealers sitting during working time. After adjusting age, gender, smoking, and family history of VV, the risk ratio of VV was 3.67(95% CI 2.03-6.59) in group I (prolonged standing and occasional walking at work), 6.29(95% CI 3.48-11.35) in group II (prolonged standing, occasional walking and heavy lifting at work), and 8.07(95% CI 4.51-14.43) in groupIII(prolonged static standing at work). In conclusion, prolonged standing at work may be a work related risk factor of VV.
In this paper, in order to analyze the dynamic response of a floating crane when it lifts a heavy cargo, the boom of the floating crane is considered as an elastic beam. The boom is divided into elements based on finite element formulation and the floating frame of reference formulation and nodal coordinates are employed to model the boom as a flexible body. As an extension of the previous study, in order to consider spatial motion in waves, the coupled equations of motions of the 6 degree of freedom (DOF) floating crane and 6 DOF cargo are developed based on the flexible multibody system dynamics. The 3 dimensional deformation of the elastic boom is considered with 18 DOF. The dynamic simulation of the floating crane and the cargo is performed under regular wave conditions with various cargo weights. Finally, the effects of the elastic boom on lifting cargo are discussed by comparing the simulation results between the elastic boom and a rigid boom.
Objective: This paper presents the factors influencing the effectiveness of materials handling equipments in agriculture. Background: Agriculture is one of the job categories where work-related musculoskeletal disorders(MSDs) are the most common. Statistics shows that majority of farm workers is exposed to repetitive and forceful body movements, lifting, lowering, pushing, pulling, or carrying heavy materials. In such a working environment, materials handling equipments are required and introduced to assist in the prevention of MSDs and other farm injuries. Method: Examples of materials handling equipments are rail carts, portable lifts, and bale handlers. Contributing factors influencing the effectiveness of materials handling equipments supplied in agriculture were identified based on the lessons learned from previous government-funded ergonomic projects. Results: Contributing factors identified include: (1) forward-looking attitude for the standardization of farming, its environments, and handling equipments, (2) participation of farm members in the process and evaluation of project, (3) leadership of project manager, (4) reinforcement of safety education and training, and (5) project selection and priority of handling equipment. Conclusion: Government-funded research planners, farmers, ergonomists, and farm machine experts are recommended to consider the factors identified when implementing materials handling equipments in agriculture. Application: Actual or potential application of this research includes recommendation for the effective implementation of material materials handling equipments in agricultural sectors.
Objectives : The purpose of this study is to evaluate the clinical effect of moxibustion treatment for FBSS patients by VAS. Methods : This clinical study was carried out for 51 cases with FBSS, who had been treated from January, 2003 to October, 2005, in oriental medical clinic. The patients were treated by the moxibustion during 8 weeks on the pain region of lower back or legs. We measured the effects of treatment by VAS. SPSS( Statistical Program for Social Science) for Windows was used for statistical analysis and repeated measures ANOVA was performed to gauge the improvement of VAS. Results : 1. We investigated 25 female and 26 male patients. The age distribution was from early 20's to 70's, among which 50's were most common. 2. The worsening factors are usually overwork and heavy lifting, but the main reason is unknown. 3. According to VAS, The patients with FBSS were improved by moxibustion treatment. Conclusion : Through this research, moxibustion therapy is considered to be effective and safe method for FBSS(Failed Back Surgery Syndrome). Moxibustion treatment had some problems that should be overcome such as severe pain and burning. Therefore we should pay more attention.
Plastic pipes Wrapped with synthetic filter are recently used for drainage or Collecting of Underground water. But it's use is possible only for small size of diameter less than 300mm, because large size plastic pipes are not readily availabe. For large diameter infiltration gallery, porous concrete pipes are now used, but it's heavy weight brings difficulties in making, moving and setting of the pipes. With it's conventional method of filter setting, fine sands are brought into the pipes to make trouble to lifting pumps and channels Therefore, initial construction cost and maintenance cost become high. To solve-this problem, new method is developed and tested. Small PVC pipes(diameter 14mm) are assembled at the site of construction to newly devised I beam type circls. The size of circular inpiltration gallery is optionally determined by I beam type circle which support small PVC pipes and is made of PVC amterial. This gallery are wrappd with syntheitc filter to prevent sand instruction. In this test, the diameter of 300, 400, 500mm were used. I beam type circles were made with PVC plated with thickness. t=6, 9, 12mm. Water quantity collected through the PVC circulor gallery are measured and the strengths of the gallery. 1. Allowable setting depth of gallery pipe below graund for the case of t=6mm, D=500mm is 2.72m. 2. Collected water quantity depends on soil texture, depth of water grandient of water surface, filter material angle of setting etc. 3. About 126% of water quantity collected from the one gallery pipe measured in two gallery pipes of two parallel installation.
카운터 밸런싱은 산업현장에서 중량물을 들어 올리거나 운반하는 경우에 부하의 기하학적 형상에 따라 액추에이터에 작용하는 부하가 저항상태로부터 오버러닝 상태로 변화될 때 부하를 안전하게 제어하는 기술이다. 산업현장에서 매우 빈번히 사용되는 기술임에도 불구하고 국내 외에서 설계의 기준이나 실습장치가 없다. 이에, 본 연구에서는 카운터 밸런싱 실습장치 개발에 필요한 아이디어를 내고, 시스템 모델링과 시뮬레이션을 통하여 설계 파라미터를 도출하고 시제품을 제작하여 이 아이디어를 구현하였으며 실험을 통하여 본 실습장치의 유용성을 확인하였다. 본 연구를 통해 개발된 실습장치를 활용하면 학생들이 산업현장에서 만나게 될 카운터 밸런싱 장치의 이해에 큰 도움을 줄 것이라고 기대된다.
The purpose of this study was to analyze the risk factors of the musculoskeletal workload of mid-old-age food preparation workers by identifying the differences in the complaints of subjective symptoms between mid-old-age housewives and mid-old-age food preparation workers. This study was carried out on a total of 83 subjects from April 2009 through July 2009: 43 food preparation workers at the catering department of general hospital A, with a high rate of mid-old-age food preparation staff, and 40 full-time housewives (40~59 years old). The analysis of the relationship between the rates of the subjective symptoms of the two groups showed that the mid-old-age food preparation workers had a 7.8-fold higher risk of developing musculoskeletal diseases than the full-time housewives. The musculoskeletal workload of the mid-old-age food preparation workers included repetitive motions, uncomfortable postures, and heavy lifting. It is hoped that this study will help provide mid-old-age people with opportunities for appropriate economic activity and labor and will help improve their work postures and methods as well as their environmental-risk factors.
Purpose: In this study, we sought to understand the risk factor for chronic disease of workers by studying the association between occupational standing time and metabolic syndrome(MetS) in full-time 300 male workers. Materials: Data on age, life habit, work related information of the subjects were surveyed using self-reported questionnaire and interview. MetS was identified based on the report of Alberti et al.(2009). As for the data analysis, SPSS 19.0 was used to conduct the descriptive statistic, ANOVA, Pearson correlation coefficient and multiple logistic regression analysis. Results: Daily working hour affects on the lifting heavy objects, running and strenuous exercise(r=-0.137, p<0.01), and total physical function decreased with the increase in age(r=-0.145, p<0.01). Also, obese was significantly associated with genuflection and bend over(r=-0.110, p<0.05). On multiple logistic regression analysis for the diagnostic indices of MetS, occupational standing time were significantly associated with waist circumference(odds ratio=0.885, ${\beta}$ value=-0.122, 95% CI=0.797-0.983, p<0.05) and triglyceride (odds ratio=0.873, ${\beta}$ value=-0.136, 95% CI=0.800-0.953, p<0.01). Conclusions: These results suggest that the working posture may be important risk factor in pathogenesis and growing of MetS and cardiovascular disease.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.