• 제목/요약/키워드: Heat-up time

검색결과 576건 처리시간 0.033초

도로터널 화재시 효과적인 소방활동전략 수립을 위한 시나리오 연구 (Scenarios for Effective Fire Fighting Operations during Tunnel Fires)

  • 김학근;이지희
    • 한국화재소방학회논문지
    • /
    • 제31권5호
    • /
    • pp.107-116
    • /
    • 2017
  • 터널화재는 국제적인 관심사이며, 매년 중대 터널화재는 발생하고 있다. 교통밀도가 증가하면서 장대터널은 물론, 더 많은 수의 터널이 건설되고 있어서, 앞으로 터널화재의 잠재위험성이 더 나빠질 수 있으므로 더욱더 심각한 문제이다. 도로터널 화재발생시 소방대원이 효과적인 소방활동 전략을 수립하도록 하는 것이 본 연구의 궁극적 목적이다. 과거 화재 사례로부터 어떠한 사고가 발생하였고, 어떠한 소방활동이 행해졌는지 알아보기 위하여 국내외 73건의 터널화재사고사례를 조사하여 4가지 사고유형으로 분류하였다. 소방활동의 전략수립을 위해 개입시간과 열방출율의 관계로 6가지 화재시나리오 곡선을 도출하였다. 이것은 두 가지 기준 즉, 반응한계와 최대 도착시간에 따라 소방활동의 전략을 수비적, 공격적 전략 중 선택할 수 있도록 하였다. 도로터널 분류 모델은 각 소방기관이 관할 터널의 화재 위험 정도를 화재 진압의 관점에서 평가하고 예방조치를 수립하는데 사용될 수 있다.

Facile synthesis of nanostructured n-type SiGe alloys with enhanced thermoelectric performance using rapid solidification employing melt spinning followed by spark plasma sintering

  • Vishwakarma, Avinash;Bathula, Sivaiah;Chauhan, Nagendra S.;Bhardwaj, Ruchi;Gahtori, Bhasker;Srivastava, Avanish K.;Dhar, Ajay
    • Current Applied Physics
    • /
    • 제18권12호
    • /
    • pp.1540-1545
    • /
    • 2018
  • SiGe alloy is widely used thermoelectric materials for high temperature thermoelectric generator applications. However, its high thermoelectric performance has been thus far realized only in alloys synthesized employing mechanical alloying techniques, which are time-consuming and employ several materials processing steps. In the current study, for the first time, we report an enhanced thermoelectric figure-of-merit (ZT) ~ 1.1 at $900^{\circ}C$ in ntype $Si_{80}Ge_{20}$ nano-alloys, synthesized using a facile and up-scalable methodology consisting of rapid solidification at high optimized cooling rate ${\sim}3.4{\times}10^7K/s$, employing melt spinning followed by spark plasma sintering of the resulting nano-crystalline melt-spun ribbons. This enhancement in ZT > 20% over its bulk counterpart, owes its origin to the nano-crystalline microstructure formed at high cooling rates, which results in crystallite size ~7 nm leading to high density of grain boundaries, which scatter heat-carrying phonons. This abundant scattering resulted in a very low thermal conductivity ${\sim}2.1Wm^{-1}K^{-1}$, which corresponds to ~50% reduction over its bulk counterpart and is amongst the lowest reported thus far in n-type SiGe alloys. The synthesized samples were characterized using X-ray diffraction, scanning electron microscopy and transmission electron microscopy, based on which the enhancement in their thermoelectric performance has been discussed.

AZ91-0.3Ca-0.2Y 마그네슘 합금 주조재의 시효경화 거동 및 기계적 특성 (Age-hardening Behavior and Mechanical Properties of Cast AZ91-0.3Ca-0.2Y Alloy)

  • 김현지;배준호;김영민;박성혁
    • 소성∙가공
    • /
    • 제32권4호
    • /
    • pp.173-179
    • /
    • 2023
  • In this study, the age-hardening behavior and tensile properties of a cast AZ91-0.3Ca-0.2Y (SEN9) alloy are investigated and compared with those of a commercial AZ91 alloy. Even after homogenization heat treatment, the SEN9 alloy contains numerous undissolved secondary phases, Al8Mn4Y, Al2Y, and Al2Ca, which results in a higher hardness value than the homogenized AZ91 alloy. Under aging condition at 200 ℃, both the AZ91 and SEN9 alloys exhibit the same peak-aging time of 8 h, but the peak hardness of the latter (86.8 Hv) is higher than that of the former (83.9 Hv). The precipitation behavior of Mg17Al12 phase during aging significantly differs in the two alloys. In the AZ91 alloy, the area fraction of Mg17Al12 discontinuous precipitates (DPs) increases up to ~50% as the aging time increases. In contrast, in the SEN9 alloy, the formation and growth of DPs during aging are substantially suppressed by the Ca- or Y-containing particles, which leads to the formation of only a small amount of DPs with an area fraction of ~4% after peak aging. Moreover, the size and interparticle spacing of Mg17Al12 precipitates of the peak-aged SEN9 alloy are smaller than those of the peak-aged AZ91 alloy. The homogenized AZ91 alloy exhibits a higher tensile strength than the homogenized SEN9 alloy due to the finer grains of the former. However, the peak-aged SEN9 alloy has a higher tensile elongation than the peak-aged AZ91 alloy due to the smaller amount of brittle DPs in the former.

절식과 고지방식 섭취가 골격근 UCP3 mRNA 발현에 미치는 영향 (Effects of Fasting and High-fat Diet Feeding on Uncoupling Protein 3 mRNA Levels of Skeletal Muscle in Rats)

  • 임기원;황혜정;서혜정;타무라 토모히로
    • 운동영양학회지
    • /
    • 제13권2호
    • /
    • pp.155-160
    • /
    • 2009
  • PURPOSE. The purpose of this study was to investigate the effects of fasting and high-fat diet feeding on uncoupling protein 3 (UCP3) mRNA levels, uncoupling the respiratory chain and producing heat, of skeletal muscle in rat. METHODS. Fasting experiment: Forty Male Sprague-Dawley rats (5 wk) were divided into non-fasting groups (CON) and fasting groups (FG) for 0 day, 0.5 day (12 hr), 1 day, 2 day and 3 day. The rats of CON were sacrificed at 0 and 3 day. High-fat diet experiment: Forty Male Sprague-Dawley rats (5 wk) were divided into low-fat diet groups (LF) and high-fat diet group feeding for 0 day, 0.5 day (12 hr), 1 day, 2 day and 3 day. The rats of LF were sacrificed at 0 and 3 day. Analysis: Analysis of UCP3 mRNA expression was used by Real-time PCR. RESULTS. UCP3 mRNA levels of FG group were increased according to time course for 2 days- fasting but decreased at 3 day-fasting. UCP3 mRNA of HF were increased during HF diet feeding for 2 day, and peaked at 1 day-HF feeding, but decreased 2 day and 3 day-HF feeding CONCLUSION. Therefore, it may be rational that UCP3 is up-regulation when a large amount of fatty acids influx occurs in skeletal muscles as well as might have a role for fine adjustments of energy expenditure.

고대 한반도 주조철기 열처리 기술에 대한 고찰 (A Study of Cast Ironware Heat Treatment Technique in Ancient Korea)

  • 최영민
    • 헤리티지:역사와 과학
    • /
    • 제53권1호
    • /
    • pp.168-183
    • /
    • 2020
  • 기원전 5세기부터 중국에서는 주조철기의 사용을 늘리기 위해 주조철기 특유의 취성(脆 性)을 제거하려 노력해 왔다. 그중 한 가지는 주조철기를 생산한 다음 별도의 가마에서 풀림열처리를 하는 기술이다. 이 기술은 조직 내 탄소를 응집하거나 제거해, 주조철기의 취성을 제거하고 단조(鍛造)를 가능하게 만드는 것이다. 풀림열처리 기술의 실체를 명확히 하기 위해 현재의 제철 기술 및 중국·일본의 연구 성과를 바탕으로 한반도 출토 고대 주조철기 가운데, 풀림열처리 기술이 확인된 가단주철제 주조철기를 검토하였다. 그 결과 원삼국시대 이전까지 가단주철제 주조철기는 모두 외부로부터 수입된 것으로 추정된다. 또한 일본 이시가미신궁에 소장 중인 칠지도가 한반도에서 제작된 것으로 본다면, 4세기에 들어서야 백제에서는 풀림열처리 기술을 확보했을 가능성이 있다. 하지만 당시에는 괴련철을 중심으로 철 생산이 이루어졌으며, 괴련철을 정련한 괴련강을 소재로 다량의 단조철기가 제작되었다. 또한 기존의 주조철기 중 주조괭이를 제외한 대부분의 주조철기가 단조철기로 대체되었다. 따라서 삼국시대까지 풀림열처리 기술은 많이 사용되지 못하였다. 하지만 통일신라시대에 들어서 철 생산 및 유통의 지역 거점인 장안리 유적에서 확인될 정도로 기술이 확산된 것을 확인하였다.

수술가이드를 이용한 무피판 임플란트 술식에서 임플란트 드릴링이 열발생에 미치는 효과 (The effect of guided flapless implant procedure on heat generation from implant drilling)

  • 유지현;정승미;최병호;주상돈
    • 대한치과보철학회지
    • /
    • 제51권1호
    • /
    • pp.11-19
    • /
    • 2013
  • 연구 목적: 본 연구에서는 수술가이드를 이용한 무피판 임플란트 술식에서 임플란트 드릴링이 열발생에 미치는 효과를 측정하였으며 드릴링 방법에 따른 온도 차이를 측정하고자 하였다. 연구 재료 및 방법: 하악 양측 제 1 대구치와 제 2 대구치가 없는 실험 모델에서 피판을 거상하는 임플란트 수술(실험A군)과 수술가이드를 이용한 무피판 임플란트 수술(실험B군), 그리고 핸드피스의 상하 수직 움직임을 제한한 후 수술가이드를 이용하여 무피판 임플란트 수술(실험C군)을 각각 진행하여 온도 측정을 하였다. 임플란트 드릴링 시 온도 측정은 thermocouple과 열전식 온도 기록계(Yokogawa, Tokyo, Japan)를 이용하여 측정하였다. 온도 측정 위치는 최종 임플란트 드릴(직경 3.8 mm)의 경계부에서 0.5 mm 떨어진 곳에서 3 mm 깊이(설측)와 6 mm 깊이(협측)로 하였다. 측정된 온도 값을 이용하여 종속변수인 온도가 정규분포 하는지를 검정하기 위해 Kolmogorov-Smirnov test를 거쳐 확인한 후 세 수술 방법 간의 평균 온도 차이를 검정하기 위해 independent t-test로 분석하였다. 결과: 피판을 거상하고 드릴링을 한 수술군(실험A군)에서 평균 온도는 $27.2^{\circ}C$($SD{\pm}2.1^{\circ}C$)를 보였고 피판을 거상하지 않고 드릴링을 한 수술군(실험B군)에서 평균 $27.5^{\circ}C$($SD{\pm}2.3^{\circ}C$)를 나타냈다. 이들 두 수술 방법 간 온도비교에서는 통계학적으로 유의한 차이를 보이지 않았다. 수술가이드를 이용하여 무피판 수술 시 상하 수직 움직임(upand-down pumping motion)이 없이 드릴링을 시행한 수술군(실험C군)에서 평균온도는 $37.0^{\circ}C$($SD{\pm}3.4^{\circ}C$)을 보였다. 이를 상하 수직 움직임으로 드릴링을 한 무피판 임플란트 수술군(실험B군)과 비교 시 통계학적으로 유의한 온도 차이를 보였다. 결론: 수술가이드를 이용하여 무피판 임플란트 수술 시 핸드피스를 상하 수직 움직임으로 드릴링을 시행하면 피판을 거상하여 수술할 때와 온도차이가 발생하지 않으나, 상하 수직 움직임 없이 드릴링을 시행하면 드릴링 시 높은 온도 상승을 보인다.

주단계(朱丹溪)의 생애(生涯)와 의학사상(醫學思想)에 관한 연구(硏究) (The life and medical idea of Chu, Dan-Gae.(朱 丹溪))

  • 이영원;윤창열
    • 대한한의학원전학회지
    • /
    • 제5권
    • /
    • pp.200-251
    • /
    • 1992
  • As concerned the life and the medical idea of Choo, Tan-Kye(朱丹溪), which it can be summarized as follows by studying. 1. Tan-Kye(丹溪) lived in the end of the won dynasty(元代末期), When the people starved and suffered from a flood-disaster and drought. etc, also the social conditions were in disorder on account of the corrupt ion of politics. And Cheol Kang seong(浙江省), located in the south region of China, has sterile soil and the climate condition humid and heatful. So the south district peoples have very weak constitution. So We can found that his medical idea reflected the phases of the periods and the regional enviornmental situations. 2. For that reason, Tan-Kye(丹溪) rejected the prescription of the "WHa Che Gook Bang(和劑局方)" which was prevalent at that time, in which the the pungent-dried herbs were widly used ; So he persisted in the "Sang Wha Lon(相火論)" and the "Positivity is usually excedeed while the negativity deficient(陽有餘陰不足論)". Then he treated with the drugs to nourish the negativity for the prime object to be applied in the clinic. 3. Tan-Kye(丹溪) refined the follows from the natural law; Heaven is to the positivity(陽) and the Earth is defined the negativity(陰), so the heaven is to the Macro(大) and the earth, micro(小):So the Sun is to the Positivity(陽), the Moon, the Negativity(陰): as to the Sun is always full while the moon always defected too. Therefore the "positivity is always excedeed for that the negativity is deficientalways(陽有餘陰不足)". In Human body, "the negativity energy (陰精) "is hard formed-easily defected(難成易虧)". And the heat(相火) in the body can be moved easily and let the negative energy to leak out. Therefore the more the positivity excedeed, the more the negativity deficient"(陽當有餘陰常不足). 4. He made it expanded the contents of the "Heat(相火)" in the Chapter Woon Chi of the Nae Kyeong(內徑) and discribed, the Life-string of the human body is originated from the movement of the "Heat with unique energy(相火一氣)". And more in human body, it is specifically regulated by the two visceras, Liver and Kidney, and is distributed in the 'Pericardium(心包絡)' 'Tripie Warmer(三焦)' 'Gallbladder(膽)' etc. In the point of his assertion of heat(相火), it is concluded both the physiological and the pathological heat of all. 5. Tan-Kye(丹溪) grew up in the family or the Confucianism. He was instructed the Confucianism(性理學) from Heo-Kyeom(許謙), the fourth diciple of Chu-Ja(朱子), and was received the Yoo Chang Ri(劉 張 李)'s triple doctrine from the La Tae Moo(羅太無), the second disciple of Yoo Wan So(劉完素). So there are much of content of Confucianism(性理學) in his medical thedry, and his theory has succeeded the achievements of the triple study. 6. About the theory of the "positivity is usually excedeed while the negativity deficient"(陽常有餘陰常不足論) of Tan-Kye, it was asserted that the positivity is never sufficient for the vital mainspring, by Chang, Kye-Pin(張介賓) and Lee, Kyoo-Zoon(李奎晙) etc. And for the Heat theory(相火論), eventhough the scholars of postorior generations criicized all of that, there are defect of the content and unification between them. 7. The father of the "Cha Eum Pa(滋陰派), Tan-Kye(丹溪) contributed considerably to the development of the oriental medicine and to the general therapy for the various diseases(一般雜病施治). 8. there are handed down and remained twenty or more of volumes of list of his writings. Among them, except "Kyeok Chi Yeo Ron"(格致餘論), "Kuk Pang Pal Hyeu"(局方發揮), they are reorganized by posteriority. There are Cho, Do-Chin(趙道震). Cho, Ee-Teok(趙以德), Tae, Sa-Gong(戴思恭), Wang Ri(王履) and Yoo, Suk-Yeon(劉淑淵) etc as disciples of his. And Wang Ryoon(王論) and Woo Pak(虞搏) as the admirer of him.

  • PDF

Effects of Hyperbaric Pressure on Cellular Morphology, Proliferation and Protein Expression of Jurkat Cell

  • Oh, Eun-Ha;Oh, Sang-Nam;Im, Ho-Sub;Lee, Joo-Hyun;Kim, Jin-Young;Moon, Joo-Hee;Hong, Eun-Young;Kim, Yang-Hee;Yang, Min-Ho;Lim, Yong-Chul;Park, Sun-Young;Lee, Eun-Il;Sul, Dong-Geun
    • Molecular & Cellular Toxicology
    • /
    • 제1권2호
    • /
    • pp.116-123
    • /
    • 2005
  • The application of high pressure on cellular morphology, proliferation and protein expression of Jurkat cells (human T lymphocyte cell line) has been extensively investigated. In the present study, we manufactured a novel pressure chamber that modulates 5% $CO_{2}$, temperature and pressure (up to 3 ATA). Jurkat cells was incubated 2 ATA pressure and analyzed cellular morphology and growth using an electron microscopy and MTT assay. The cells showed the morphological changes in the cell surface, which appeared to cause a severe damage in cell membrane. The growth rate of the cells under 2 ATA pressure decreased as cultured time got increased. Furthermore, a long term exposure of high pressure on Jurkat cells may act as one of the important cellular stresses that leads to inducing cell death. Cellular proteomes were separated by 2-dimensional electrophoresis with pH 3-10 ranges of IPG Dry strips. And many proteins showed significant up-and-down expressions with hyperbaric pressure. Out of all, 10 spots were identified significantly using matrix-assisted laser desorption/ionization-time of fight (MALDI-TOF) mass spectrometry. We and found that 9 protein expressions were decreased and one protein, heat shock protein HSP 60, was increased in Jurkat cells under 2 ATA. Identified proteins were related to lipid metabolism and signal transduction.

화학기상증착법에 의하여 기공이 제어된 활성탄소펠렛의 CO2/CH4 가스 분리능 향상 (Improving CO2/CH4 Gas Separation Capability of Pore Controlled Activated Carbon Pellets through Chemical Vapor Deposition)

  • 채은선;하나은;임채훈;민충기;하성민;이영석
    • 공업화학
    • /
    • 제35권5호
    • /
    • pp.404-409
    • /
    • 2024
  • 대기 중에 방출되는 CO2를 감축하기 위하여 매립지가스로부터 CO2를 분리하여 포집하는 기술이 주목받고 있다. 본 연구에서는 CH4의 화학기상증착법을 통한 활성탄소펠렛의 기공 제어로 CO2/CH4 혼합가스의 가스 분리능을 향상시키고자 하였으며, 반응시간에 따른 흡착 특성을 고찰하였다. CH4를 통한 탄소의 증착 이후 비표면적과 미세 기공 부피 모두 증가하였으며 각각 최대 997.8 m2/g, 0.392 cm3/g까지 증가하였다. 또한 증착 시간의 증가에 따라 CO2 흡착량이 최대 97.4 cm3/g까지 증가하였다. 탄소가 증착된 시료는 미처리 시료에 비하여 파과시간이 최대 32.5% 지연되었다. 결과적으로 CH4의 화학기상증착법을 통하여 활성탄소펠렛의 기공 구조를 제어하였으며, 활성탄소펠렛의 CO2/CH4 가스 분리능을 향상시킬 수 있었다. 이는 열처리에 의한 비표면적의 증가와 탄소 증착으로 인한 0.61 nm 이하의 초미세 기공 부피 증가에 의하여 향상된 CO2 흡착능에 기인하였다.

Proteomic Analysis of the Triglyceride-Rich Lipoprotein-Laden Foam Cells

  • Lu, Yanjun;Guo, Jianli;Di, Yong;Zong, Yiqiang;Qu, Shen;Tian, Jun
    • Molecules and Cells
    • /
    • 제28권3호
    • /
    • pp.175-181
    • /
    • 2009
  • In hypertriglyceridaemic individuals, atherosclerogenesis is associated with the increased concentrations of very low density lipoprotein (VLDL) and VLDL-associated remnant particles. In vitro studies have suggested that VLDL induces foam cells formation. To reveal the changes of the proteins expression in the process of foam cells formation induced by VLDL, we performed a proteomic analysis of the foam cells based on the stimulation of differentiated THP-1 cells with VLDL. Using two-dimensional gel electrophoresis (2-DE) and matrix-assisted laser-desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis, 14 differentially expressed proteins, containing 8 up-regulated proteins and 6 down-regulated proteins were identified. The proteins are involved in energy metabolism, oxidative stress, cell growth, differentiation and apoptosis, such as adipose differentiation-related protein (ADRP), enolase, S100A11, heat shock protein 27 and so on. In addition, the expression of some selected proteins was confirmed by Western blot and RT-PCR analysis. The results suggest that VLDL not only induces lipid accumulation, but also brings about foam cells diverse characteristics by altering the expression of various proteins.