• Korean journal of food and cookery science
• /
• v.18 no.5
• /
• pp.487-494
• /
• 2002

This study was conducted to investigate the thermal stability of water-soluble and fat-soluble vitamins dissolved in water and milk by various heat treatments. Vitamin samples were prepared by dissolving them in water and milk at various concentrations, and were heat treated for 30 min at 65$\^{C}$, 15 sec at 85$\^{C}$, 5 sec at 100$\^{C}$, 121$\^{C}$ at 15 min, the levels of residual vitamin were measured by using HPLC. Milk samples were fortified with vitamins before and after UHT treatment. As heating over 100$\^{C}$, riboflavin in water were destructed more than 92% but fortified in milk showed less than 20% destruction, suggesting that riboflavin was protected by milk components. Also retinol heated ever 100$\^{C}$ was more stable in milk than in water. L-Ascorbic acid and cholecalciferol(D$_3$) showed a similar destruction rate in water and in fortified milk. L-ascorbic acid was easily destructed by UHT treatment. Destruction of thiamin and tocopherol was increased in fortified milk. Among tour capsulated water-soluble vitamins, L-ascorbic acid was much more stable compared with powder form. Nicotinic acid and folic acid either in capsule or powder form showed a slight destruction by heat treatment. The results suggested that the fortification of unstable vitamins such as L-ascorbic acid, thiamin, tocopherol and cholecalciferol(D$_3$) should be made in milk after heat treatment.

• Journal of Environmental Science International
• /
• v.10 no.5
• /
• pp.329-336
• /
• 2001

Characgcteristics of nocturnal boundary layer(NBL) were analyzed by the upper-air observations data using with the airsonde and pilot balloons from 1994 to 1999 in Kyungpook province. The automate weather boundary layer can become stably stratified when the surface is cooler than the air. Stable nocturnal boundary layer height were estimated from the top of surface stable layer where the vertical gradient of temperature and mixing ratio tend to zero or negative. The depth of the stable nocturnal boundary layer depended largely on the thermal effect rather than the wind effect at nighttime. The NBL was more developed on the land than on the coastal region. The stability index (bulk Richardson number) showed that the NBL was stable when the wind was weak and the vertical gradient of the temperature was strong. The heat budget in the NBL was studied by considering the effect of the radiative and the cooled by both the longwave radiative flux and the divergence of the heat flux, while NBL under the cloudy sky the longwave radiative flux played a role of the warming. It was noted that the heat was not conserved in both cases. To complete the heat budget in the NBL the warming/cooling by advection and subsidence must be considered.

• The Pure and Applied Mathematics
• /
• v.12 no.2 s.28
• /
• pp.133-142
• /
• 2005

Generalizing the Cauchy-Rassias inequality in [Th. M. Rassias: On the stability of the linear mapping in Banach spaces. Proc. Amer. Math. Soc. 72 (1978), no. 2, 297-300.] we consider a stability problem of quadratic functional equation in the spaces of generalized functions such as the Schwartz tempered distributions and Sato hyperfunctions.

• Bulletin of the Korean Mathematical Society
• /
• v.46 no.2
• /
• pp.295-301
• /
• 2009

We prove the Hyers-Ulam stability of a Pexiderized exponential equation of mappings f, g, h : $G{\times}S{\rightarrow}{\mathbb{C}}$, where G is an abelian group and S is a commutative semigroup which is divisible by 2. As an application we obtain a stability theorem for Pexiderized exponential equation in Schwartz distributions.

• The Pure and Applied Mathematics
• /
• v.18 no.3
• /
• pp.231-244
• /
• 2011

We prove the Hyers-Ulam stability for trigonometric type functional inequalities in restricted domains with time variables. As consequences of the result we obtain asymptotic behaviors of the inequalities and stability of related functional inequalities in almost everywhere sense.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.173-178
• /
• 2005

The tile construction methods for existing have been used materials within limit which adhesion by wet method in masonry wall and concrete structure. These existing adhesive tech can caused many problems in construction of large and reform tile, after that it can be happened loose scale, peel off, falling off tile by heat and vibration or impact. In according to, this study is to test tile for bond stability, adhesive property by impact, vibration. low property by heat and then, we have the results as below; (1) The tile adhesive stability can be effected as adhesive area between bond agent and tile, adhesive area can more wide and press enough to ensure property. (2) Existing adhesive strength and standard relative tile construction is limited to adjust performance tile on the concrete and masonry wall. In summary, It is necessary to establish standard of performance and test method to ensure tile adhesive salability in dry wall.

• Journal of the Korean Ceramic Society
• /
• v.36 no.9
• /
• pp.887-892
• /
• 1999

The inner crack-like pore with controlled amount of Ca impurity in the high purity alumina single crystal sapphire had been created by micro-fabrication technique which includes ion implanation photo-lithography Ar ion milling and hot press technique. The crack-like pores in two-hour hot pressed specimen were extremely stable even after heat treating at 1,80$0^{\circ}C$ for 5 hours almost no healing was observed. But the crack-like pores in one-hour hot pressed specimen at 1,30$0^{\circ}C$ were healed by heat treatment and the amount of healing was increased with the heat treatment time and temperature and the amount of Ca addition. The edges of crack-like pore parallel to <1100> direction in (001) basal plane were stable but the edges normal to this direction in (00101) plane <1120> direction were unstable to facetting This means that the surface energy of alumina along the <1100> direction in (0001) basal plane in much lower than <1120> direction.

• Textile Coloration and Finishing
• /
• v.35 no.4
• /
• pp.231-238
• /
• 2023

Microporous gel films of 29 m were prepared by the gel drawing of UHMWPE/soybean oil blend (4:6, w/w) up to 800%. The stretched films containing the optimal photoinitiator concentration, depending on the film thickness, was cross-linked under 365 nm LED-UV irradiation and the oil was extracted with n-hexane, resulting in a gel fraction of 95 % or more. With the formation of the cross-linked structure, the melt-down temperature and melt-down elongation increased by 16 ℃ and by 63% respectively. Also the thermal stability of the crosslinked UHMWPE was proved by the area shrinkage under the heat treatment decreased to 3.8 % compared to 17.4 % for the pristine film, and by the reductions in the combustion heat. The enhanced thermal stability of the crosslinked UHMWPE microporous membranes can be used for various industrial applications such as filters, electric vehicles and energy storage systems.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3033-3038
• /
• 2007

In this research, Rayleigh instability of gas-liquid flow in annular pipe is studied in film boiling using viscous potential flow. Viscous potential flow is a kind of approximation of gas-liquid interface considering velocity field as potential including viscosity. A dispersion relation is obtained including the effect of heat and mass transfer and viscosity. New expression for dispersion relation in film boiling and critical wave number is obtained. Viscosity and heat and mass transfer have a stabilizing effect on instability and its effect appears in maximum growth rate and critical wave number. And the existence of marginal stability region is shown.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.10-17
• /
• 1984

The critical conditions marking the onset of thermally induced vortices over an inclined iso-thermal plate are investigated using the linear stability theory. The stability equations are simplified by estimating the orders of magnitude of respective terms. The analysis is carried out under the assumption that for the system of large Prandtl numbers temperature disturbances are initiated within the conventional thermal boundary layer of the basic flow. The stability criteria obtained from the present results agree well with those of the existing quasi-parallel flow models. In addition it is found that the critical conditions generate the heat transfer correlation in good agreement with experiments. Therefore, it is suggested that the validity of existing theoretical models will be reexamined.