• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.20-27
• /
• 1998

The characteristics of the bubble adsorptive separation of CTAB(cetyltrimethylammonium bromide) and CuS precipitates was investigated. The Langmuir adsorption equation was adequate at very low concentration of CTAB, and the adsorption heat was determined from the batch analysis considering the bulk liquid accompanied between bubbles. The adsorption mechanism was explained with the collision adsorption between bubbles and precipitate particles. The optimum concentration ratio of (CTAB) to (CuS) for adsorptive separation was 0.1 and coincided with the ratio for the coagulation of particles. The collection efficiency was depended on pH and CTAB concentration but independent of the air flow rate, and the maximum efficiency was 0.0002. The selective separation of ZnS from the mixture of Cu-Cd-Zn sulfides was obtained by the bubble adsorption with CTAB.

• Journal of environmental and Sanitary engineering
• /
• v.14 no.1
• /
• pp.31-41
• /
• 1999

Several new ion exchange resins have been synthesized from chloromethyl styrene-1, 4-di-vinylbenzene with 1%, 2%, 5% and 10%-crosslinking and macrocyclic ligands of cryptand type by interpolymerization method. The adsorption characteristics and the pH, time, solvents and concentration dependence of the adsorption of metal ions by this resin were studied. The correlation between the separation characteristics of uranium and transition metal on the resins and the stability constants of complexes with macrocyclic ligands have been examined. The resins were very stable in both acidic and basic media and had good resistance to heat at $280^{\circ}C$. The $UO_2^{2+}$ aqueous solution was not adsorbed on the resins below pH 3.0, but the power of adsorption of $UO_2^{2+}$ increased rapidly above pH 4.0. The optimum equilibrium time for adsorption of metallic ions was twenty minutes and adsorptive power decreased in proportion to crosslinking size of the resins and order of dielectric constants of solvents used and the selective sequence for metal cations is in the order of $UO_2^{2+}$, $Cu^{2+}$ and $Ce^{3+}$ .

• Journal of environmental and Sanitary engineering
• /
• v.15 no.1
• /
• pp.77-87
• /
• 2000

Several new ion exchange resins have been synthesized from chloromethyl styrene-l,4-divinylbenzine with 1%, 2%, 10% and 20%-crosslink and macrocyclic ligands of cryptand type by interpolymerization method. The adsorption characteristics and the pH, time, solvents and concentration dependence of the adsorption of metal ions by this resin were studied. The correlation between the separation characteristics of uranium and transition metal on the resins and the stability constants of complexes with macrocyclic ligands have been examined. The resins were very stable in both acidic and basic media and have good resistance to heat. The $UO_2^{2+}$ was not adsorbed on the resins below pH 3.0, but the power of adsorption of $UO_2^{2+}$ increased rapidly above pH 4.0. The optimum equilibrium time for adsorption of metallic ions was two hours and adsorptive power decreased in proportion to crosslink size of the resins and order of dielectric constants of solvents used and the selective sequence for metal cations was in the order of $UO_2^{2+}$, $Ni{2+}$ and $Nd{3+}$.

• Clean Technology
• /
• v.20 no.1
• /
• pp.22-27
• /
• 2014

Under low pressures of $CF_4$ and $C_2F_6$ up to 20.7 kPa, the equilibrium adsorbed quantity on activated carbon was experimentally examined using the volumetric method at various temperatures between 293.15 K and 333.15 K. To give the best fit to the experimental data curve, the two step model (i.e., Langmuir model for the first layer adsorption and then Freundlich physisorption) is suggested. The method of initial slope yielded the enthalpy of adsorption for the first step while we could apply the Clausius-Clapeyron equation to find the heat of adsorption of the second step. They are 25.9 kJ/mol and 11.8 kJ/mol, respectively, with $CF_4$, and 38.7 and 38.2 kJ/mol with $C_2F_6$.

• Journal of the Korean Chemical Society
• /
• v.61 no.5
• /
• pp.238-243
• /
• 2017

In this study, water treatment sludge carbonized with $400^{\circ}C$ was tested as an adsorbent for the removal of Pb and Cd in water. The carbonized sludge was characterized by thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), X-ray fluorescence spectrometry (XRF), and surface area analysis. Carbonized sludge exhibited much higher specific surface area and total pore volume than water treatment sludge itself. In batch-type adsorption process, carbonized sludge represented better adsorption performance for Pb than Cd, achieving 90~98% at the concentrations conducted in the experiments. Equilibrium data of adsorption were analyzed using the Freundlich and Langmuir isotherm models. It was seen that both Freundlich and Langmuir isotherms have correlation coefficient $R^2$ value larger than 0.95. The results of studies indicated that carbonized water treatment sludge by heat treatment could be used as an efficient adsorbent for the removal of Pb and Cd from water.

• Journal of Power System Engineering
• /
• v.21 no.3
• /
• pp.93-101
• /
• 2017

In conventional adsorption chamber, adsorbent is embedded in between heat exchanger fins by wire mesh. This method impedes heat and mass transfer efficiency. So in this study, to improve the heat transfer performance of heat exchanger, a fin-tube exchanger was coated with FAPO (Ferroaluminophosphate) zeolite adsorbent. The fin-tube heat exchanger has a fin pitch of 1.8 mm with a variation of adsorbent coating thickness of about 0.1 mm, 0.15 mm and 0.2 mm. By varying cooling water temperature and chilled water temperature respecively, heat transfer rate and overall heat transfer coefficient were investigated. As a result, the heat transfer rate and overall heat transfer coefficient increase with decreasing cooling water temperature and increasing chilled water temperature. Under the basic conditions, the heat transfer rate of heat exchanger with 0.2 mm coating thickness is 11% and 43% higher than that of 0.1 mm and 0.15 mm, respectively. The overall heat transfer coefficient is $189.1W/m^2{\cdot}^{\circ}C$, it is two times lager than that of 0.1 mm.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.2
• /
• pp.109-115
• /
• 1991

This study examines the effect of submergence on phosphorus adsorption characteristics in Gangseo(paddy soil), Yesan(non-cultivated soil), and Jungdong soil(upland soil). The soils were submerged with glucose sol'n at $28^{\circ}C$ for 17 days. After the submergence, the phosphorus adsorption was conducted at three temperatures(5, 25 and $45^{\circ}C$). The phosphorus adsorption maximum($X_m$) and the equilibrium constant(K) were obtained by Langmuir adsorption isotherm, and the heat of adsorption(${\Delta}H$) was calculated by van't Hoff's equiation. Results obtained are as follows ; 1. The amounts of adsorbed P were increased with temperature, but the effects of temperature on rate of P adsorption were very small in all three soils. 2. By submergence, $X_m$ were increased from 500mg P/kg to 850mg P/kg in Gangseo soil, from 1,850mg P/kg to 3,300mg P/kg in Yesan soil, and from 310mg P/kg to 670mg P/kg in Jungdong soil. But the effects of temperature on $X_m$ were very small in all three soils. 3. Submergence decreased K for Gangseo and Yesan soils, but increased for Jungdong soil. Whereas K were increased with temperature in all three soils. 4. By submergence, ${\Delta}H$ for Gangseo soil was greatly increased (from 2.2 Kcal/mole to 3.5 Kcal/mole), whereas that for Yesan soil changed little (from 5.7 Kcal/mole to 5.5 Kcal/mole). It was 4.4 Kcal/mole in submerged Jungdong soil.

• Mass Spectrometry Letters
• /
• v.15 no.1
• /
• pp.54-61
• /
• 2024

An improved voltage modulation method (VMM) was used to control the heat release and adsorption properties of the adsorbent. In this work, the voltage and flux modulation methods were considered under unified experimental conditions of dissociative surface ionization (SI) of polyatomic organic molecules, the criteria were found when under VMM conditions the current relaxation of SI carries information about the kinetic properties of thermal desorption of ionizable dissociation particles arriving on the surface of polyatomic molecules. Conditions were found under which the relaxation of the ionic current in the flux modulation method is determined by the kinetics of the heterogeneous dissociation reaction of the original polyatomic molecules. The values of the thermal desorption rate constant K⁺ and the activation energy E⁺ obtained with VMM for desorption of (CH₃)₂NCH⁺₂ ions with m/z 58 by adsorption of imipramine and amitriptyline molecules agree well with each other and with the results for the desorption of the same ions by adsorption of other molecules. This confirms one of the basic conditions for the equilibrium process SI - the a degree (β coefficient) of the same particles SI on the same emitter surface is the same and does not depend on the way these particles are formed on the emitter surface.

• Clean Technology
• /
• v.12 no.3
• /
• pp.171-174
• /
• 2006

The adsorbent for removal of heavy metal ions is prepared reutilizing the leached sludge generated in process of making the red mud coagulant we have develope. The pellet-type adsorbent is made by heat-treating a mixture of 10g of the leached sludge, 1g of kaolin, and 2 g of sodium silicate solution at $600^{\circ}C$ for 2 hours. In experiments of batch adsorption, the adsorbent shows good performance in adsorption of $Pb^{2+}$ ion.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.6
• /
• pp.1012-1016
• /
• 2008

[ $TiO_2-V_2O_5$ ] sol was fabricated using sol-gel method and $TiO_2-V_2O_5$ thin films were fabricated using dip-coating method. $V_2O_5$ sol was added 0.01mole, 0.03mole, 0.05mole into $TiO_2$ sol. As a results of crystalline properties, $V_2O_5$ peaks were not found in spite of $V_2O_5$ additive. Thickness of thin films increased $0.1{\sim}0.25{\mu}m$ every a dipping. Capacitance of thin films increased with increasing heat treatment temperature and it increased largest at $700^{\circ}C$. Capacitance of thin films decreased with increasing $V_2O_5$ additive and it increased largest at 0.01mole. Because adsorption time and desorption time of thin films was about 2 minutes 40 seconds and about 3 minutes 40 seconds respectively, adsorption time was faster about 1 minutes than desorption time.