• Journal of Korean Medical Ki-Gong Academy
• /
• v.8 no.1
• /
• pp.115-127
• /
• 2005

The present study aims to provide efficient regimen by means of the Oriental medicine tool to measure Yangseng developed to fit the situation of Korea. For this purpose, the elderly people aged older than 65 were selected and their level of Yangseng was compared and analyzed depending on their perception of health. From the study, following conclusions could be drawn: 1. The total subject of study were 763 consisting mostly of the illiterate and spoused with disease but without leisure activities. 2. Most of the subjects were found to have little confidence with their health. With regard to their level of Yangseng, higher points were rated in morality yangseng, followed by activities & rest, diet, mind yangseng, sleep, seasonal yangseng, exercise and sex life in order. 3. By socio-demographic characters for the group with confidence in health, there were more male than female, with spouse, disease and leisure activities currently. In the group without confidence in health, there were more female, without spouse and leisure activity but with disease presently. 4. As for the level of Yangseng in the group with confidence in health, higher points were recorded in morality yangseng, followed by activities & rest, mind yangseng, diet, sleep, exercise and sex life in order. In case of the group without confidence in health, higher points were recorded in morality yangseng, followed by activities & rest, diet, mind yangseng, sleep, exercise and sex life in order. From the above outcomes, it would be necessary to motivate the subjects to have a renewed concept for health and efficient regimen. Continued and repeated eforts should be made to fill the gap in the study using the tool to measure Yangseng of the elderly people.

• Journal of Preventive Medicine and Public Health
• /
• v.45 no.4
• /
• pp.211-218
• /
• 2012

Objectives: The objective of this study was to identify the differences in obesity rates among people with and without disabilities, and evaluate the relationship between obesity rates and the existence of disabilities or characteristics of disabilities. Methods: Mass screening data from 2008 from the National Disability Registry and National Health Insurance (NHI) are used. For analysis, we classified physical disability into three subtypes: upper limb disability, lower limb disability, and spinal cord injury. For a control group, we extracted people without disabilities by each subtype. To adjust for the participation rate in the NHI mass screening, we calculated and adopted the weight stratified by sex, age, and grade of disability. Differences in obesity rates between people with and without disabilities were examined by a chi-squared test. In addition, the effect of the existence of disabilities and grade of disabilities on obesity was examined by multiple logistic regression analysis. Results: People with disabilities were found to have a higher obesity rate than those without disabilities. The obesity rates were 35.2% and 35.0% (people with disabilities vs. without disabilities) in the upper limb disability, 44.5% and 34.8% in the lower limb disability, 43.4% and 34.6% in the spinal cord injury. The odds for existence of physical disability and grade of disability are higher than the nondisabilities. Conclusions: These results show that people with physical disability have a higher vulnerability to obesity.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.235-247
• /
• 2021

The need for appropriate technology in global health has expanded dramatically as the gap between industrialized and developing countries continues to expand. However, there is no collective knowledge of appropriate technology in global health. Thus, this study intends to provide light on the latest developments in the field of appropriate technology in global health and to speculate on future directions. A rapid review, or simplified technique, was used to systematically identify and summarize emerging papers. The search technique used the keywords "global health" and "appropriate technology." The total number of papers collected from PubMed and Scopus was 427, and 19 articles were thoroughly reviewed for the result section following the research. The study's conclusions included the following: 1) an assessment of appropriate technology adopted in developing countries; and 2) strategies for implementing appropriate technologies in global health. Additionally, we drew lessons and identified problems to serve as a useful guide for future research and development in appropriate technology. This review uncovered a small but valuable level of information about acceptable technology in global health.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.29 no.4
• /
• pp.7-20
• /
• 2023

Purpose: The main purpose of this paper is to assess a body of research evidence that articulates the impact of physical and environmental factors on behavioral·psychological health and quality of life for the elderly people with dementia who reside in long-term care facilities. This follow-up study of the previous literature review aims to further identify physical and environmental factors, that improve health and quality of life for the elderly people with dementia, published in recent five years and to expand the understanding of clinical outcomes as mechanism that mediate the effect of physical environmental factors on improving behavioral·psychological health and quality of life for the elderly people with dementia. Methods: Comprehensive literature review has been conducted to identify empirical studies that link the design of dementia care facilities to health- and quality of care(QOL)-related outcomes and this follow-up review scrutinized peer-reviewed articles published in recent five years (from January 2018 to December 2022), filling the gap between the previous literature review and the current state of research. Results: The review identified a growing body of literature that articulates environment-related factors that improve behavioral·psychological health and quality of life for the elderly people with dementia living long-term care facilities. Implications: The findings of the review can be translated to design implications and design decisions to promote psychological and behavioral health and quality of life of people with dementia in long-term care facilities.

• Journal of Magnetics
• /
• v.17 no.2
• /
• pp.153-157
• /
• 2012

This study evaluated the ability of Diffusion-Weight Image (DWI), which is one of pulse sequences used in MRI based on the T2 weighted images, to detect samples placed within phantoms according to their size. Two identically sized phantoms, which could be inserted into the breast coil bilaterally, were prepared. Five samples with different sizes were placed in the phantoms, and the T2 weighted images and DWI were obtained. The Breast 2 channel coil of SIEMENS MAGNETOM Avanto 1.5 Tesla equipment was used for the experiments. 2D T2 weighted images were obtained using the following parameters: TR/TE = 6700/74 msec, Thickness/gap = 5/1 mm, Inversion Time (TI) = 130 ms, and matrix = $224{\times}448$. The parameters of DWI were that TR/TE = 8100/90 msec, Thickness/gap = 5/1 mm, matrix = $128{\times}128$, Inversion Time = 185 ms, and b-value = 0, 100, 300, 600, 1000 s/mm. The ratio of the sample volume on DWI compared to the T2 weighted images, which show excellent ability to detect lesions on MR images, was presented as the mean b-value. The measured b-value of the samples was obtained: 0.5${\times}$0.5 cm=0.33/0.34 square ${\times}$ cm (103%), 1${\times}$1 cm=1.28/1.25 square ${\times}$ cm (102.4%), 1.5${\times}$1.5 cm = 2.28/2.67 square ${\times}$ cm (85.39%), 2${\times}$2 cm=3.56/4.08 square ${\times}$ cm (87.25%), and 2.5${\times}$2.5 cm=7.53/8.77 square ${\times}$ cm (85.86%). In conclusion, the detection ability by the size of a sample was measured to be over 85% compared to T2 weighted image, but the detection ability of DWI was relatively lower than that of T2 weighted image.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.81-89
• /
• 2020

Purpose: This in vitro study was conducted to evaluate the marginal and internal fit of three-unit Co-Cr frameworks fabricated by computer-aided metal milling and direct metal laser sintering(DMLS) systems in comparison to conventional casting method. Methods: Three-unit Co-Cr frameworks were fabricated by conventional wax up with casting(CWC), computer-aided metal milling(MM) and direct metal laser sintering(DMLS)(n=10 each). The marginal and internal fit of specimens were examined using a light-body silicone impression material. The thickness of light-body silicone was measured at eight reference points each, divided in the mesio distal and bucco lingual directions. All measurements were conducted by a stereomicroscope. Digital photos were taken at 150× magnification and then analyzed using a measurement software. The Kruskal-Wallis test and Bonferroni correction were used for analyzing the results. Results: The mean(SD) is ㎛ for fabrication methods, the mean marginal fit were recorded respectively, DMLS 39(27), followed by CWC 63(38), MM 220(128). and the mean internal fit CWC 95(47), DMLS 116(49), MM 210(152). In addition, the largest gap was found in the occlusal surface area among the internal measurement areas of all groups. Conclusion: As a result, the direct metal laser sintering method showed better marginal and internal fit than the metal milling method. The marginal and internal fit were statistically different according to the three fabrication methods(p<0.001). Except the MM group, the marginal fit of the CWC and DMLS groups was below the clinical standard of 120 ㎛. Based on the results of this study, it can be applied to clinical use in the future.

• Journal of Technologic Dentistry
• /
• v.40 no.4
• /
• pp.209-215
• /
• 2018

Purpose: The purpose of this study was to evaluate the clinical acceptability of the marginal and internal gap of Co-Cr metal copings fabricated with stereolithography (SLA). Methods: Titanium master dies were milled after scanning of the prepared tooth (n=30). For group I, Co-Cr metal copings were made from conventional lost-wax technique(LWT, n=10). For group II, the master dies were scanned and designed with CAD system. Then, metal copings were milled with Co-Cr(SUB, n=10). For group III(ADD, n=10), the scanning and design procedures were same as group II and burn-out resins were fabricated with SLA device. The marginal and internal discrepancies were measured under an optical microscope(100x) on ten reference points and were statistically analyzed with one-way ANOVA(${\alpha}=.05$). Results: The mean total discrepancies were $53.76{\pm}12.42{\mu}m$ in the LWT group and $69.82{\pm}15.48{\mu}m$ in the ADD group. The SUB group showed the largest total mean value $110.33{\pm}13.77{\mu}m$. There was statistically significant difference between the SUB and the other groups(P<0.05). Conclusion : Co-Cr metal copings fabricated with SLA technology showed clinically acceptable value on marginal and internal gap and there was no statistically significant difference between conventional lost-wax technique and SLA.

• Korean Journal of Health Education and Promotion
• /
• v.21 no.1
• /
• pp.115-135
• /
• 2004

The purpose of this study was to examine the health knowledge, attitude and behaviors of Korea high school students and find out the relationship between knowledge, attitude and behaviors in an effort to lay the foundation for the development of health-promotion programs and health education for adolescents. The subjects were 505 students in their first and second year of high school in Gangnam-gu and Guro-gu, Seoul. After a survey was conducted for seventeen days from April 23 to May 9, 2003, with self-administered questionnaires, the collected data was encoded and analyzed with SPSS Win 11.0 program. The frequency, percentage, mean and standard deviation were calculated, and χ²-test, t-test, ANOVA, Scheffe Post Hoc Tests and Pearson Correlation procedure were employed. The findings of this study were as follows： 1. There appeared significant differences in general traits, family-related characteristics and health-related features between the students in Gangnam and the others in Guro. 2. The collective average of the Gangnam residents in health knowledge was 13.97, and that of the Guro residents was 14.64. The overall collective average was 14.35(total of 22 points), and 65.2 percent of the students investigated had a correct knowledge. The points showed significant differences in the variables of sex, economic status, mother's occupation,and health concerns. 3. The students from Gangnam scored a mean of 77.55 in health attitude, and the others from Guro got an average of 78.75. The overall collective average was 78.22(total of 110 points), and 71.1 percent took a correct attitude toward health. The points showed significant differences in the variables of sex, religion, mother's education level, health concerns. 4. In the field of health behavior, the Gangnam residents got a mean of 63.99, and the Guro dwellers scored a mean of 62.12. There was a significant gap between the two groups, and the overall collective average was 62.94(total of 102 points). 61.5 percent tried to stay fit in a correct behavior. The points showed significant differences in the variables of sex, economic status, parents' education level, father's occupation, health concern of parents, self-perceived health status, health concern, exercise or diet performance for health, health education times for 1yr. 5. Concerning the relationship of health knowledge to health attitude and behavior, the health knowledge showed significantly positive correlation with health attitude(r＝0.227, p＜0.01), and the health knowledge showed significantly positive correlation with health behavior(r＝0.262, p＜0.001). But their relationship is comparatively low. The health attitude was not significantly correlated to health behavior.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.2
• /
• pp.62-68
• /
• 2016

Purpose In a cyclosporine experiment using a robotic liquid handing system has found a deviation of its standard curve and low reproducibility of patients's results. The difference of the test is that methanol is mixed with samples and the extractions are used for the test. Therefore, we assumed that the abnormal test results came from using methanol and conducted this test. In a manual of a robotic liquid handling system mentions that we can choose several setting parameters depending on the viscosity of the liquids being used, the size of the sampling tips and the motor speeds that you elect to use but there's no exact order. This study was undertaken to confirm pipetting ability depending on types of liquids and investigate proper setting parameters for the optimum dispensing ability. Materials and Methods 4types of liquids(water, serum, methanol, PEG 6000(25%)) and $TSH^{125}I$ tracer(515 kBq) are used to confirm pipetting ability. 29 specimens for Cyclosporine test are used to compare results. Prepare 8 plastic tubes for each of the liquids and with multi pipette $400{\mu}l$ of each liquid is dispensed to 8 tubes and $100{\mu}l$ of $TSH^{125}I$ tracer are dispensed to all of the tubes. From the prepared samples, $100{\mu}l$ of liquids are dispensed using a robotic liquid handing system, counted and calculated its CV(%) depending on types of liquids. And then by adjusting several setting parameters(air gap, dispense time, delay time) the change of the CV(%)are calcutated and finds optimum setting parameters. 29 specimens are tested with 3 methods. The first(A) is manual method and the second(B) is used robotic liquid handling system with existing parameters. The third(C) is used robotic liquid handling system with adjusted parameters. Pipetting ability depending on types of liquids is assessed with CV(%). On the basis of (A), patients's test results are compared (A)and(B), (A)and(C) and they are assessed with %RE(%Relative error) and %Diff(%Difference). Results The CV(%) of the CPM depending on liquid types were water 0.88, serum 0.95, methanol 10.22 and PEG 0.68. As expected dispensing of methanol using a liquid handling system was the problem and others were good. The methanol's dispensing were conducted by adjusting several setting parameters. When transport air gap 0 was adjusted to 2 and 5, CV(%) were 20.16, 12.54 and when system air gap 0 was adjusted to 2 and 5, CV(%) were 8.94, 1.36. When adjusted to system air gap 2, transport air gap 2 was 12.96 and adjusted to system air gap 5, Transport air gap 5 was 1.33. When dispense speed was adjusted 300 to 100, CV(%) was 13.32 and when dispense delay was adjusted 200 to 100 was 13.55. When compared (B) to (A), the result increased 99.44% and %RE was 93.59%. When compared (C-system air gap was adjusted 0 to 5) to (A), the result increased 6.75% and %RE was 5.10%. Conclusion Adjusting speed and delay time of aspiration and dispense was meaningless but changing system air gap was effective. By adjusting several parameters proper value was found and it affected the practical result of the experiment. To optimize the system active efforts are needed through the test and in case of dispensing new types of liquids proper test is required to check the liquid is suitable for using the equipment.

• Korean Journal of Clinical Pharmacy
• /
• v.25 no.2
• /
• pp.102-110
• /
• 2015

Objective: This study was to investigate the perception gap between preceptors and pharmacy students on community pharmacy experiential education. Methods: The online survey was performed for 55 preceptors and 215 pharmacy students separately from April 1 to April 30, 2014. The preceptors were who completed community pharmacy practice experience at least a session and the students were who involved in community pharmacy practice for more than 21 days. The questionnaires were prepared based on the lesson contents guideline of Introductory Pharmacy Practice Education of Community Pharmacy by Korea Association of Pharmacy Education. The survey questions were consisted with demographic characteristics, evaluation of student and preceptors, benefits and disadvantages of pharmacy practice for both groups. Results: A total of 27 (49.1%) preceptors and 103 (47.9%) pharmacy students responded to the survey questionnaires. Preceptors indicated that students lacked face-to-face communication ability with patients, caregivers, and physicians. One of the Benefits of participating in pharmacy practice education as a preceptor included the improvement of self-esteem (70.37%). Disadvantages were identified as workload burden due to teaching and preceptor responsibilities at the same time. All students responded that benefits of experiencing pharmacy practice education were helping them determine their career, and they would consider working in community pharmacies (68.93%). However, handling over-the-counter drugs and communicating with doctors or nurses were identified as barriers. In addition, preceptors and pharmacy students expressed necessity of the standard text books and curriculums. Conclusion: This study identified the perception gap on community pharmacy experiential education between preceptors and pharmacy students. For the successful implementation of pharmacy practice experience, the effective and appropriate methods should be developed.