• Korean Journal of Optics and Photonics
• /
• v.14 no.5
• /
• pp.515-520
• /
• 2003

Characteristics of an amplifier with repetition rate of a few KHz is investigated. The continuous flash lamp pumped Nd:YAG laser head is used as an amplifier. The thermally induced birefringence of the laser medium is compensated and the depolarization is reduced to 5% in a double-pass amplifier. The amplification factor of a four pass amplifier reaches to about 3.2 at the repetition rate 5-10 KHz and the pulse width is lengthened from 40 ns to 48 ns.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.5
• /
• pp.311-317
• /
• 2011

The blind spot is an area where drivers visibility does not reach. When drivers change a lane to adjacent lane, they need to give an attention because of the blind spot. If drivers try to change lane without notice of vehicle approaching in the blind spot, it causes a reason to have a car accident. This paper proposes a night-time blind spot vehicle detection using cameras. At nighttime, head-lights are used as characteristics to detect vehicles. Candidates of headlight are selected by high luminance feature and then shape filter and kalman filter are employed to remove other noisy blobs having similar luminance to head-lights. In addition, vehicle position is estimated from detected head-light, using virtual center line represented by approximated the first order linear equation. Experiments show that proposed method has relatively high detection porformance in clear weather independent to the road types, but has not sufficient performance in rainy weather because of various ground reflectors.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.53.4-53
• /
• 2001

This paper described about the system which can be inspect work roll surface for deciding a milling schedule and roll changing at hot strip mill in POSCO. Developed system consists of CCD camera, Xenon lamp with fiber bundle and mechanical control part. The water probe build up water pole between head of probe and roll surface to acquisite a good image from a work roll surface under the bad environment with steam, cooling water and high temperature. This system is possible to monitor a work roll surface of about 12${\times}$9mm. We have shown the validation of the developed system which can monitor the evolution of degradation on work roll surface.

• Pediatric Infection and Vaccine
• /
• v.22 no.2
• /
• pp.106-112
• /
• 2015

Purpose: The long-term administration of antibiotics interferes with bacterial culture in the middle ear fluids (MEFs) of young children with otitis media with effusion (OME). The purpose of this study is to determine whether molecular diagnostics can be used for rapid and direct detection of the bacterial pathogen in culture-negative MEFs. Methods: The specificity and sensitivity of both polymerase chain reaction (PCR) and loop-mediated isothermal amplification (LAMP) to the lytA gene of Streptococcus pneumoniae were comparatively tested and then applied for pneumococcal detection in the clinical MEFs. Results: The detection limit of the PCR assay was approximately $10^4$ colony forming units (CFU), whereas that of LAMP was less than 10 CFU for the detection of S. pneumoniae. Both PCR and LAMP did not amplify nucleic acid at over $10^6$ CFU of H. influenzae or M. catarrhalis, both of which were irrelevant bacterial species. Of 22 culture-negative MEFs from children with OME, LAMP positivity was found in twelve MEFs (54.5%, 12/22), only three of which were PCR-positive (25%, 3/12). Our results showed that the ability of LAMP to detect pneumococcal DNA is over four times higher than that of PCR (P<0.01). Conclusions: As a high-resolution tool able to detect nucleic acid levels equivalent to <10 CFU of S. pneumoniae in MEFs without any cross-reaction with other pathogens, lytA -specific LAMP may be applied for diagnosing pneumococcus infection in OME as well as evaluating the impact of a pneumococcal conjugate vaccine against OME.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2160-2163
• /
• 2005

Solid freeform fabrication (SFF) technology plays a major role in industry and represents a reasonable percentage of industrial rapid prototyping/tooling/manufacturing (RP/RT/RM) development applications. However, SFF technology still has long way to progress to achieve satisfactory process speed, surface finish and overall quality improvement of its application. Today, three dimensional printing (3DP) technique that is one of SFF technology is receiving many interests, and is applied by various fields. It can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. However, need long curing time after manufacture completion. And it must do post-processing process necessarily to heighten strength of objects because strength of fabricated objects is very weak. Therefore, in this study, we proposed an improved 3DP process that can solve problems of conventional 3DP process. The general 3DP process is method to spout binder simply through printer head on powder, but proposed process is method to cure jetted UV resin by UV lamp after jet UV resin using printhead on powder. The hardening of resin is achieved strongly at early time by UV lamp in proposed method. So, the proposed process can fabricate three dimensional objects with high speed without any post-processing.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.53-60
• /
• 2008

A test was conducted using two high density discharge lamps, the H2D and the structurally new H4D. They were tested for luminous illumination and luminous temperature in the day and night time. The test was conducted without crippling the performance of the H2D by adding a magnetic actuator, enabling it to move left to right, and up and down. By making these modifications we constructed a sample of the H4D. We compared the H2D and the H4D sample's luminous illumination and luminous temperature by using a photometer and a digital thermometer in the day and night time. We discovered that the H2D and H4D performed similarly from the data we gathered. Now we know the H4D has potential use and extensive research needs to be made to gather more detailed data.

• Ocean Science Journal
• /
• v.43 no.2
• /
• pp.101-106
• /
• 2008

A single specimen of Albula leptocephalus (55.7 mm SL) was collected from the southern coastal waters of Korea using an aquatic lamp. It is characterized by having a ribbon-like body with a small head and a well-forked caudal fin. Although the general appearance was similar to the leptocephalus of A. vulpes including myomere counts and fin ray counts, the melanophore deposition was different from that of A. vulpes. This leptocephalus specimen was confirmed with A. forsteri using the cytochrome b mtDNA (Cytb) analysis. The genetic distance of Cytb between the present leptocephalus and A. forsteri is 0.006-0.038, which falls into the cutoff point separating Albula species into eight deep lineages including the four valid species. Its genetic characteristic have more similarities to those of Fiji than those of Hawaii and the Northern territory of Australia.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.165-168
• /
• 2001

자동차 전조등에서 얻을 수 있는 자료는 차량마다 가지는 각각의 다양한 패턴과 문자 숫자 및 특수문자이탈 문자나 숫자 그리고 특수문자의 경우는 저장된 데이터베이스의 활용으로 그 차량에 대한 정보를 검색할 수 있다. 하지만 전조등의 경우에는 부분적인 패턴만이 있다면 숫자나 문자들의 정보에 의존할 수 없게 된다. 본 논문에서는 무늬가 가지는 특징의 추출을 이용하여 발생하고 있는 교통사고나 기타 사건의 발생시 부분적인 영상만이 획득되더라도 정색을 통한 후보 차량의 정색이 가능하도록 영상의 특성 값들을 구성하러 조합하였다. 본 시스템은 사고차량의 추적 및 교통사고에서보다 효율그인 과학수사에 일조할 것으로 기대한다.

• Journal of the Korean Society of Visualization
• /
• v.6 no.2
• /
• pp.9-13
• /
• 2008

The reproducibility of water droplet formation which is indispensible in the investigation of a drop-on-demand piezoelectrically driven inkjet was verified by checking the size of droplet and distance from the nozzle tip of inkjet head to droplet. Based on the reproducibility of droplet formation, we visualized the formation of micro-scale droplets by acquiring consecutive images at the jetting frequency of 500 Hz for which air bubbles were not generated. Two different electric waveforms were used to drive the piezoelectric actuator. The visualization system consists of a high-speed camera that can capture images up to 250,000fps, a long-distance microscope and a halogen lamp as a light source.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.1
• /
• pp.8-15
• /
• 2011

This paper presents an effective method for detecting vehicles in front of the camera-assisted car during nighttime driving. The proposed method detects vehicles based on detecting vehicle headlights and taillights using techniques of image segmentation and clustering. First, in order to effectively extract spotlight of interest, a pre-signal-processing process based on camera lens filter and labeling method is applied on road-scene images. Second, to spatial clustering vehicle of detecting lamps, a grouping process use light tracking method and locating vehicle lighting patterns. For simulation, we are implemented through Da-vinci 7437 DSP board with visible light mono-camera and tested it in urban and rural roads. Through the test, classification performances are above 89% of precision rate and 94% of recall rate evaluated on real-time environment.