• 한국생산제조학회지
• /
• 제19권1호
• /
• pp.108-113
• /
• 2010

Decreasing products lifecycles and increasing consumers desires for quality and design make the automotive industries try to reduce time for developing new designs. In order to reduce developing time, I have designed head lamps, which are really important to have an effect on brand identities and images, using layers concept that is one of the international automotive design trends by alias and photoshop, and produced prototype by RP. To assemble the produced prototype to the body and manufacture the frame to exterior modelling efficiently, I have studied on joining dissimilar materials of aluminum alloy that can make the prototype lighter and stainless steel, which is good for corrosion resistance by using laser beam. These materials were welded for finding the optimum joining condition and evaluating the soundness of joining zone. The joining was performed under the condition of laser power 500, 550, 575, 600W and 11~14Hz. In this study, the suitable joining condition between aluminum alloy (Al 2024) and stainless steel (STS 304) can be obtained at the laser power 575W and frequency 12Hz.

• Design & Manufacturing
• /
• 제13권2호
• /
• pp.1-5
• /
• 2019

In this study, micro cellular injection molding of automobile head lamp housing with uneven thickness structure was performed to obtain improvement on deformation and light-weight of the part. The thickness of the presented model was uniformly modified to control the deformation of the molded part. In order to maximize the lightweight ratio, the model having an average thickness of 2.0 mm were thinly molded to an average thickness of 1.6 mm. GFM(Gas Free Molding) and CBM(Core Back Molding) technology were applied to improve the problems of the conventional foam molding method. Equal Heat & Cool system was also applied by 3D cooling core and individual flow control system. Warpage of the molded parts with even cooling was minimized. To improve the mechanical properties of foamed products, complex resin containing nano-filler was used and variation of mechanical properties was evaluated. It was shown that the weight reduction ratio of products with light-weighted injection molding was 8.9 % and the deformation of the products was improved from the maximum of 3.6 mm to 2.0 mm by applying Equal Heat & Cool mold cooling system. Also the mechanical strength reduction of foamed product was less than 12% at maximum.

• 자동차안전학회지
• /
• 제9권4호
• /
• pp.55-60
• /
• 2017

This paper presents the motorcycle inspection standards of electrical system, frame & body, lights and speedometers. 187 real-world motorcycles are visually and mechanically inspected according to the developed inspection standards. The non-compliance rate of inspection standards of the lights is 23.7% and main causes are damage, tinting, painting and coloration of head-lamp, number plate lamp, front-rear position lights, stop lamp and direction indicators of motorcycles. Also, 28.4% of motorcycles are dropped from the luminous intensity inspection standard. Motorcycle electrical system cannot be visually inspected. The motorcycle inspections standards are improved reflecting 187 cases of real-world motorcycle inspection results.

• 자동차안전학회지
• /
• 제8권4호
• /
• pp.6-11
• /
• 2016

The objective of this study is to present the inspection standards of motorcycle lamps affecting motorcycle traffic accident in night time. The inspection standards of motorcycle lamps recommended by CITA International Motor Vehicle Inspection Committee are surveyed. Also, the domestic safety standards of motorcycle and inspection standards of passenger car are considered. The inspection standard and method with principal reasons of rejections of head-lamp, number plate lamp, front-rear position lights, stop lamp and direction indicators of motorcycles are suggested.

• Journal of Microbiology and Biotechnology
• /
• 제31권4호
• /
• pp.610-620
• /
• 2021

There has been increasing interest in the head and neck squamous cell carcinoma (HNSCC) that is caused by high-risk human papillomavirus (HR-HPV) and has posed a significant challenge to Otolaryngologists. A rapid, sensitive, and reliable method is required for the detection of HR-HPV in clinical specimens to prevent and treat HPV-induced diseases. In this study, a multiple cross-linking spiral amplification (MCLSA) assay was developed for the visual detection of HPV-16. In the MCLSA assay, samples were incubated under optimized conditions at 62℃ for 45 min, and after mixing with the SYBR Green I (SGI) dye, the positive amplicons showed bright green fluorescence while the negative amplicons exhibited no obvious change. The specificity test revealed that the developed MCLSA technique had high specificity and could effectively distinguish all five HPV-16 strains from other pathogenic microorganisms. In terms of analytical sensitivity, the limit of detection (LoD) of MCLSA assay was approximately 5.4 × 101 copies/tube, which was 10-fold more sensitive than loop-mediated isothermal amplification (LAMP) and RT-PCR. The detection results of laryngeal cancer specimens collected from 46 patients with suspected HPV infection in the Liaoning region demonstrated that the positive detection rates of MCLSA and hybridized capture 2 kit were 32.61% (15/46). The true positive rate of the MCLSA assay was higher than that of RT-PCR (100% vs. 93.33%) and LAMP (100% vs. 86.67%). Therefore, the MCLSA assay developed in the present study could be a potentially useful tool for the point-of-care (PoC) diagnosis of HR-HPV, especially in resource-limited countries.

• 산업기술연구
• /
• 제22권A호
• /
• pp.43-48
• /
• 2002

Acoustic modes of a vehicle compartment dominate the noise characteristics of the vehicle system in the low frequency range. Vehicle compartments have head liner and air gap of proper thickness to mount a interior lamp, as well as to have a good sound insulation and absorption performance. This study estimates the acoustic modal property of the medium size passenger car by experiment and by finite element analysis and also, investigates the effect of the head liner on the acoustic mode of the passenger compartment to obtain useful information for low noise compartment design.

• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.369-375
• /
• 2019

This paper presents a new method on how to calculate the thrust forces acting on an auto-leveling device in headlamps for passenger vehicles. The leveling device is used to lower the angle of lights when a load in the trunk of the vehicle lifts it. In the process of the headlamp design, it is imperative to predict the external forces so that the designers can decide whether to proceed or not. The device is composed of three pivot joints with no reaction moment, a plate that holds the lamp, and a leveling motor that changes rotation to linear motion. In this study, force balance, moment balance, and geometric compatibility are applied to the leveling device system so that a nonlinear system of equations can be derived; the multi-dimensional Newton-Raphson algorithm is then used to solve these. A sensitivity analysis is carried out to verify which design variables affect the system the most: the mass of the lamp and the height between the pivot and leveling device affect the thrust forces the most. Then, considering the friction forces between the moving parts, the hysteresis of the forces are derived. An experimental apparatus, designed and developed in this study, is used to verify the exactness of the derived equations. The results from experiments coincide well with the calculated results. The friction hysteresis, in particular, proves this upon analysis.

• 융합신호처리학회논문지
• /
• 제3권3호
• /
• pp.27-35
• /
• 2002

지식기반 영상검색은 영상이 갖는 다양한 데이터에서 추출되어진 특징값을 지식으로 하여 질의 영상에 대한 검색 결과영상을 찾아주는 방법이다. 본 연구에서 사용한 영상자료는 자동차 전조등 영상으로 전조등 영상에 대한 입력 자료는 차량마다 다양한 패턴을 갖는 영상과 문자, 숫자 및 특수문자이다. 영상에서의 정보는 화소값들의 분포상태나 통계적 분석 및 패턴의 상태 등인데, 전조등 영상에서는 이러한 정보가 영상 검색을 위한 지식 데이터로 사용된다. 영상데이터에서 추출된 다양한 정보를 다중 지식 기반으로 하여 본 논문에서는 교통사고나 기타 차량사건의 발생 시 활용할 수 있는 영상검색 시스템을 구축하였으며, 전조등 영상의 검색에 효율적으로 적용한 다중 지식기반 검색방법을 제안하였다. 다중지식 구축을 위한 특징함수는 컬러 영상에서와 그레이레벨 영상에서 각각 필요한 성분들을 추출하여 구성하였으며, 한 개나 두 개 정도의 특징값을 사용한 기존의 방법과 달리 복합적인 특징값의 사용을 통한 다중 지식 기반의 검색방법이 컬러정보나 패턴에 대한 유사성을 높여서 용의차량의 전조등 영상 검색 효율성을 향상시켰다. 소프트웨어의 제작을 위해 비쥬얼 베이직과 크리스탈리포트 그리고 MS 액세스 데이터베이스를 사용하였다. 검색 효율성 및 특성 함수의 구성을 효과적으로 발전시키면 검색시스템은 용의 차량의 추적 및 교통사고에서 효율적인 과학수사에 일조할 것으로 기대한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.589-592
• /
• 1997

In this paper, we propose a simple algorithm to calculate the number of passing cars at night by using an image processing sensor for digital black and white images with 256 tone levels. To recognize cars, we capture their head lamps. The reflection of the head lamps is one of the most troublesome factors in recognizing cars. The main problem in this paper is how to recognize cars under the influence of the reflection of the head lamps especially in rainy days. In general, the image of a head lamp is nearly circular and the reflection is long and narrow. On the difference of these forms, we can exclude the reflection in our proposed algorithms For real-time operation and simple calculation, we recognize the existence of cars using fifteen lines with 256 tone levels. In the experimental application on a road, the recognition rate of a real-time operation is more than 90%. Moreover, we will also explain briefly how to recognize passing cars for 24 hours.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.92-97
• /
• 2011

Vehicle lightings are very important for safe driving during night time. Since the eye recovery time after an exposure to oncoming headlights would take after several seconds, the aiming point of vehicle head lamps have to pass safety requirements. Despite the fact that vehicle inclination is variable with vehicle load conditions, the head lamps aiming point is usually fixed at a constant position which is set by car manufacturer. Consequently, vehicle head lamps under varying load conditions often make people in the opposing vehicle uncomfortable, and even worse, can cause an accident. This paper presents an active vehicle lighting mechanism to automatically adjust its aiming point, or cut-off line, in order to compensate the change in vehicle inclination resulting from load variations. The effectiveness of the proposed method is demonstrated through a set of simulations and experiments with a real vehicle.