• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.485-488
• /
• 2007

Riverbank filtration is a kind of artificial aquifer recharge for the fresh water supply. By construction of several production wells penetrating the riverbank, surface water withdrawn from the river would pass riverbed. This extracted water is well known to be cooler than surface water in summer and warmer than surface water in winter, showing more constant water temperature. This characteristic of extracted water is applied to geothermal energy utilization. Prediction of the annual temperature variation of filtrated water is the major concern in this study. In Daesan-myeon, Changwon-si, Gyeongsangnam-do, South Korea, riverbank filtration facility has been on its operation for municipal water supply and thermal energy utilization since 2006. Appropriate hydraulic and thermal properties were estimated for flow and heat transfer modeling with given pumping rate and location. With the calibrated material properties and boundary conditions, we numerically reproduced measured head and temperature variation with acceptable error range. In the numerical simulation, the change of saturation ratio and river stage caused by rainfall was calculated and the resulting variation of thermal capacity and thermal conductivity was considered. Simulated temperature profiles can be used to assess the possible efficiency of geothermal energy utilization using riverbank filtration facility. Influence of pumping rate, pumping location on the extracted water temperature will be studied.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.385-391
• /
• 2014

A wheeled armored vehicle is a military vehicle that has been developed to enhance combat capabilities and mobility for the army. The wheeled armored vehicle has a high center of gravity, and it operates on unpaved and sloped roads. Therefore, this vehicle has a high risk of rollover crashes. To design the interior of the military vehicle, the crew's safety during rollover crashes is an important factor. However, actual vehicle tests for design are extremely expensive. In this paper, nonlinear dynamic analysis is performed to simulate the rollover crashes and the passenger injury is assessed for a wheeled armored vehicle. The scope of this research is the rollover condition, FE modeling of the wheeled armored vehicle and the dummy, arrangement of dummies, assessment of passenger injuries, and simulation model for rollover crashes.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.321-329
• /
• 2016

Based on the results of groundwater flow system modeling for a hypothetical deep geological repository site, quantitative and spatial distributions of groundwater flow rates at the positions of deposition holes, groundwater travel length and time from the positions to the surface environment were analyzed and used to suggest a method for determining locations of deposition holes. The hydraulic head values at the depth of the deposition holes and a particle tracking method were used to calculate the ground-water flow rates and groundwater travel length and time, respectively. From the results, an approach to designing a layout of deposition holes was suggested by selecting relatively favorable positions for maintaining performance of the disposal facility and screening some positions of deposition holes that did not comply with specific constraints for the groundwater flow rates, travel length and time. In addition, a method for determining a geometrical direction for extension of the disposal facility was discussed. Designing the layout of deposition holes with the information of groundwater flow at the disposal depth can contribute to secure performance and safety of the disposal facility.

• Journal of Korea Water Resources Association
• /
• v.45 no.12
• /
• pp.1201-1211
• /
• 2012

This paper constructed the single country sequential dynamic CGE model to analyze the economic impacts of subsidizing water industry under the GHG emission abatement policy in Korea. We introduced the carbon tax to reduce the GHG emission and made two scenarios. One is to transfer the total tax revenue to household. The other is to mix the tax transfer and water industry support. Our Simulation results show that the macroeconomic effects might be positive by subsidizing water industry compared with the pure tax transfer. However, the support of water industry doesn't contribute to head for the non-energy intensive economy because it's economic activity highly depend on fossil energy and energy intensive products as intermediate demand. This means that it is important to make efforts on the cost effective measures such as energy technology progress, alternative energy development, and energy efficiency improvement in water industry against climate change policy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2744-2748
• /
• 2015

This paper analyzes the effect on productivity by measuring Function Point per MM(man-month) in a software development project and code inspection which performed in Agile methodology, and introduce the method of applying MDA/MDD technology in the e-government standard framework project. MDA/MDD which recently raising its head is technology that increase software development productivity through automatic transformation form abstract model into lower abstract model, or from model to code. but, many Lessons obtained through the case studies, the analysis suggests a limited effect measurements. In this study, efficient development methodology and utilizing a e-government framework to measure the effectiveness of the MDD to the new measures through a case study applied to real information system development process. In addition to, managing information modeling through integrated repository presents a traceability and visibility.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.186-193
• /
• 2018

Modern manufacturing industries is to produce both precise and robust mechanical parts without failure while they are in service. In order to prevent a part failure for its lifetime, a mechanical design for a part should be examined on a basis of mechanical simulation. A nozzle plate, being a key part in steam engines, changes flow directions of steam in a turbine used in power plant. This paper is to the design and test for part safety and durability. Currently, nozzle plates are fabricated by welding nozzles to their plates. Welding causes some defects on the used materials while they are being manufactured. Another major defect is un-even pitches between welded nozzles. Welding causes phase changes because of high melting temperature of metal. This leads to decay on the welding spots, which weakens their structural strength and then, may lead to early damages on mechanical structures. This research proposes assembly-typed nozzle plate without welding. From the beginning, nozzle and plate are designed for insertion-typed assembly. Nozzle head and foot are designed in accordance with the grooves on outer ring and inner ring of a plate to make mating surfaces. Then the nozzle plate should be proved for structural and fatigue safety before they are put in manufacturing. This research adopts commercial softwares for modeling and mechanical simulation. The test result shows that the design with smaller mating area and deeper insertion produces higher safety in terms of structure and durability. From the conclusion, this paper proposes the assembly-typed nozzle plate to replace the welding typed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.39
• /
• pp.32.1-32.5
• /
• 2017

Background: Osteochondroma is a benign tumor that tends to develop in mandibular condyle and coronoid process in the craniofacial region. If tumor mass has grown from condyle into the infratemporal space with zygomatic arch obstructing the access, there are risks associated with surgical exposure and local resection of these masses. Case presentation: This study reports on a case of osteochondroma on mandibular condylar head where we treated with surgical excision via preauricular approach with 3D analysis. After the local resection, there were no surgical and post-operative complications until 8-month follow-up period. Conclusions: In local excision of osteochondroma, our method is a minimally invasive method. It is a good example of osteochondroma treatment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.1145-1148
• /
• 2005

In this paper, we introduce a probabilistic model based on Bayesian networks (BNs) for inferring human fatigue by integrating information from various visual cues and certain relevant contextual information. Visual parameters, typically characterizing the cognitive states of a person including parameters related to eyelid movement, gaze, head movement, and facial expression, serve as the sensory observations. But, an individual visual cue or contextual Information does not provide enough information to determine human fatigue. Therefore in this paper, a Bayesian network model was developed to fuse as many as possible contextual and visual cue information for monitoring human fatigue. At the experiment results, display the utility of the proposed BNs for predicting and modeling fatigue.

• Journal of Practical Engineering Education
• /
• v.8 no.1
• /
• pp.23-29
• /
• 2016

Our society is endemic in safety insensitivity, yet we have been concerned for safety education and disaster drill since the Sewol Ferry accident. However, the practical training costs very high, and it has its limit to increase reality. Recently, industry fields put emphasis on virtual reality (VR) as alternatives, so various contents are invented by using advantages of VR. The paper explores crucial application in 3-dimensional simulation for fire drill, suggests novel design, and contemplates about educative result through designing process. In order to construct and materialize the suggested system, practical 3D spatial information model and various disaster-drill scenarios are necessary. Also, to apply game elements for augmentation in users' utility, educations based on computer science and visual art are inevitable, which requires skills in programing and modeling respectively. Thus, this study investigates educational effect of convergence field through the suggested system designing process.

• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.433-439
• /
• 2000

Volume rendering is a powerful tool for visualizing sampled scalar values from 3D data without modeling geometric primitives to the data. The volume rendering can describe the surface-detail of a complex object. Owing to this characteristic. volume rendering has been used to visualize medical data. The size of volume data is usually too big to handle in real time. Recently, various volume rendering algorithms have been proposed in order to reduce the rendering time. However, most of the proposed algorithms are not proper for fast rendering of large non-coded volume data. In this paper, we propose a block-based fast volume rendering algorithm using a shear-warp factorization for non-coded volume data. The algorithm performs volume rendering by using the organ segmentation data as well as block-based 3D volume data, and increases the rendering speed for large non-coded volume data. The proposed algorithm is evaluated by rendering 3D X-ray CT body images and MR head images.