• 기본간호학회지
• /
• 제6권3호
• /
• pp.414-433
• /
• 1999

The purpose of this study is to identify the needs which are perceived by one of the familiy members who have head injury parients by traffic accidents in the intensive care units. Subjects were 70 families members of head injury patients admitted to 2 general hospitals NICU located Pusan city, 1 general hospital NICU located Ulsan city from December 1. 1998 to February 28. 1999. For this study, 70 family members were interviewed with aid of a Likert scale which was developed by researcher for this study. For development of the survey instrument, literature review and open questionnaire technique with family members and the nurses working in NICU. The 50needs-items were classified into 7 groups according to the homogeneity of the items with the support of literature review. For the content validity, the instrument was reviewed by 1 nursing professor and the internal reliability of this instrument was Cronbach alpha=0.94 which is highly accepted. Data was analyzed by a SPSS computer program. Data analysis included frequency. percentage, mean, standard variance and t-test or ANOVA. The results were as followings : 1. The general characteristics of head injury patients shows that the male was 74.3%, the female was 25.7% and age distribution shows that the fifty-fifty nine years was 30%, the highest. Of religion the buddhism was the most, The diagnosis distribution shows that epidural hematoma was 32.9% and subdural hematoma was 24.3%. The mentalility distribution shows that semicoma was 31.4% and stupor was 31.4%. Hemiplegia was 42.9% 2. The general charaterisrics of the family needs of head injury patients shows that thirty-thirty nine years was 31.4%, the highest. sex distribution shows that the male was 20%, the female was 80%. Of religion the buddism was the most. 3. The family needs of head injury patients was $3.03{\pm}0.42$, needs for the information of a patient's condition was $3.65{\pm}0.48$, the highest. And needs for the information of care and treatment was $3.48{\pm}0.48$, needs to be supplied with comfortable facilities for family was $3.04{\pm}0.66$, needs to be participate in a patient's care was $2.90{\pm}0.55$, needs to be informed about the available resources was $2.83{\pm}0.59$, needs to be supported emotionally for family was $2.79{\pm}0.55$, needs for religious assistance was $2.51{\pm}0.85$. 4. Examining the family needs of head injury patients according to patient's characteristics, mentality, plegia degree and operation were shown be variables to make an effect on the needs for the head injury patients family. At all, according to severity of head. injury, the family needs of head injury patients was high. 5. Examining the family needs of head injury patients according to their general characteristics, we could know that religion, job. income were shown to be variables to make an effect on the family needs. Through the examination it can be seen that the characteristics of head injury patients and the family needs of head injury patients. In conclusion, the family needs of head injury patients was almost same the family needs of ICU patients. Therefore we must involve the family's care of head injury patients and we must provide exact and repeated explanation, education and support the family of head injury patients. As this study was resulted in selecting the families admitted to NICU of some general hospital, we couldn't stretch the result in our favor. Therefore, continuous studies are suggested.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.990-994
• /
• 2004

This paper presents a method to predict the transient characteristic of the air lubricated slider head in a hard disk drive by using optimization technique. The time dependent modified Reynolds equation based on the molecular slip flow approximation equations was used to describe the fluid flow within the air bearing and the implicit finite difference scheme is applied to calculate the pressure distribution under the slider head. The exhaustive search combined with the Broyden-Fletcher-Goldfarb-Shanno method were employed to obtain optimum design variables which are taper angle, rail width and taper length in order to keep the forces and moments acting on the slider head in dynamic equilibrium. The results show that the optimal head slider of the magnetic head has good stability characteristic that can reach the steady state within 0.5 microsecond.

• 대한기계학회논문집
• /
• 제18권5호
• /
• pp.1087-1095
• /
• 1994

Chain drive power transmission system was developed for a low head hydro-turbine which generates power by energy transformation on the turbine blades attached to chains. Also, experimental and theoretical analysis for the sprocket wheel tooth load distribution were performed. The tooth load was measured by the specially designed load sensor. It was found that the tooth load distribution for the steady state operation was in good accordance with the quasi-static state results showing the peak load at the final meshing tooth. The trend of the experimental results agreed with the theoretical results based on the spring model analysis and difference in the magnitude of the maximum tooth load was considered to be the effect of the variable spring constant due to the moving contact point between the roller and sprocket wheel tooth.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.243-248
• /
• 2007

The durability of a cylinder head is influenced by the thermal and mechanical history during the manufacturing process, as well as engine operation. In order to improve the durability of cylinder head, both load from engine operation and the preload conditions from the manufacturing process must be considered. The aluminum cylinder head used for a HSDI diesel engine is investigated to reduce the possibility of high cycle fatigue crack in this study. FE analysis is performed to elucidate the mechanism of high cycle fatigue crack in the HSDI diesel cylinder head. Two separate approaches to increase the durability of the cylinder head are discussed: reducing load from engine operation and re-arranging preload conditions from the manufacturing process at the critical location of the cylinder head. Local design changes of the cylinder head and modification of pretension load in the cylinder head bolt were investigated using FE analysis to relieve load at the critical location during engine operation. Residual stress formed at the critical location during the manufacturing process is measured and heat treatment parameters are changed to re-arrange the distribution of residual stress. Results of FE analysis and experiments showed that thorough consideration of the manufacturing process is necessary to enhance the durability of the cylinder head.

• 대한지하수환경학회지
• /
• 제1권2호
• /
• pp.90-99
• /
• 1994

수리전도도의 대수값이 정규 분포를 갖고 또 공간적 상관관계를 갖는 무작위 변수라는 가정하에 지하수 유동영역 안에서 불균질한 수리전도도를 발생시켰다. 발생된 수리전도도의 거리에 따른 공분산값의 변화는 이론적으로 제시되는 변화와 잘 일치된다. 지하수위와 수리전도도는 확률론적으로 작용하는 무작위 변수들로 보고 수리 전도도와 지하수위에 대한 확률 통계적 분석을 위해 몬테카를로 시뮬레이션 방법과 유한요소법을 이용하였다. 지하수위와 수리전도도의 분산값은 지하수 유동영역의 점원, 경계조건, 수위구배, 흐름방향 및 상관 거리에 따라 특징적인 분포를 보인다. 특히 수위와 수리전도도간의 공분산값이 음수인 영역은 유동 시스템의 변화에 영향을 거의 받지 않는 영역으로 볼 수 있어서 영향권의 도출과 관계시킬 수 있다.

• 대한환경공학회지
• /
• 제35권5호
• /
• pp.334-339
• /
• 2013

강변여과용 수평집수관을 모사하는 파일럿 규모의 모래통 실험을 수행하였으며, 다양한 출구유속에 대한 수평집수관에서의 수두분포를 구하였다. Kim이 수행한 실험실 규모의 수평집수관에서의 손실수두에 Kim이 개발한 이론 즉, 작은 규모의 수평집수관에서의 손실수두로부터 큰 집수관의 손실수두를 계산하는 방법을 적용하여 본 연구의 관측치와 비교함으로써 Kim의 이론이 타당함을 알 수 있었다. 또한, 이들의 이론을 적용하여 본 연구에서의 관측치로부터 실규모 집수관에서의 수두분포를 구하는 방안을 예를 들어 설명함으로써 강변여과의 수평집수관 설계방법을 제시하였다.

• Applied Microscopy
• /
• 제12권1호
• /
• pp.33-40
• /
• 1982

Several phages of Bacillus thuringiensis distributed in Korea were isolated. The distribution and morphological characteristics of phages were studied. The results are as follows; 1. The isolated phages were highly specific for Bacillus thuringiensis var. thuringiensis. They were classified as YM series phages and designated as phage YM-1, YM-2 and YM-3 according to their morphological characteristics. 2. Most of these YM series phages were isolated from compost including domestic animal dung and soil under sewage. 3. The YM-1 phage was similar to Bacillus subtilis ${\phi}25$ in morphology. It has 94nm x 86nm head, contractile tail sheath and base plate with four cornered structure. 4. The YM-2 phage was similar to Bacillus subtilis GA-1 phage in morphology. It had 70nm x 56nm head and tail without contractile tail sheath. 5. The YM-3 phage was similar to Bacillus subtilis ${\phi}29$ phage. It had 56nm x 43nm head and tail with distal enlargement.

• 한국표면공학회지
• /
• 제46권3호
• /
• pp.133-138
• /
• 2013

We have developed a 2D axi-symmetric numerical model for an inductively coupled plasma system in order to analyze gas mixing effect through a narrow gap shower head. For frictional flow, holes of 0.5 mm diameter and 2 mm length are approximately modeled in 2D. Gas velocity distribution 10 mm below the shower head showed 2 times difference between the center and the edge at 10 mTorr. At 10 mm above the wafer, it was increased to 6 times difference due to the pumping duct effect. The model with a 5 mm height buffer region of a shower head showed reasonable behavior of Ar discharge. The density of Ar metastable showed additional peak inside the buffer region around the edge holes.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.760-765
• /
• 2000

The study deals with the development of a computational procedure for evaluating the temperature rise in dry and lubricated multi-layered contacts of head/disk interface. A transient computational model with a transformed rectangular computational domain is utilized. A model and a computational method for micro-contact with sub-lubricated zone, including friction heat generation, have been presented. The model was applied, taking full account of the changes in contact area and contact load due to frictional heating. The computational distribution of temperature is obtained with the analytical findings for various composition and contact conditions. Especially, a rapid rise ($220^{\circ}C$ or above) in read head temperature lese to a saturation in the influence of a thermal spike on signal performance. This general class of problems can be treated provided that heat generation distribution and layer properties are known.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.310-317
• /
• 2013

In this paper, the contact pressure of the wafer and polishing pad for final polishing process for 300 mm-wafer were investigated through numerical analysis using FEM tool, ANSYS. The distribution of the contact pressure is one of main parameters which affects on the flatness and surface roughness of polished wafers. Two types of polishing head, a hard type head with ceramic disk and a soft type head with air bag were considered. The effects of the deformation and initial shape of table on the contact pressure were also examined. Both heads and tables were modeled as 3D finite element model from solid model, and the material properties of polishing pads and rubber plate for the air-bag head were obtained from tensile tests. The contact pressure deviation on wafer surface was smaller with air bag head than hard type head even when the table had form errors such as convex or concave. From this 3D analysis, it could be concluded that the air-bag head has better uniformity of the contact pressure on wafer. Also, the effects of inner diameter of air bag and radial clearance between wafer and retainer were investigated as view point of contact pressure concentration on the edge of wafer.