• 한국지구과학회지
• /
• 제42권6호
• /
• pp.623-631
• /
• 2021

국내외 해상 위험·유해물질(HNS, Hazardous and Noxious Substances) 물동량 증가와 함께 HNS 유출 사고가 빈번히 발생하고 있다. HNS는 전 세계적으로 약 6,000여 종으로 대부분 유독한 성질을 가지므로 이러한 유출 사고 발생은 해양 생태계 파괴를 비롯하여 폭발 및 화재 등으로 인한 인명 및 재산피해를 유발한다. 따라서 해상 HNS 유출 사고를 대비하여 파장에 따른 HNS 분광 라이브러리 구축 및 탐지 알고리즘을 개발해야 한다. 본 연구에서는 프랑스 현지에서 지상 HNS 유출 실험을 진행하였다. 초분광센서 관측을 통해 파장에 따른 톨루엔 라이브러리 스펙트럼을 구축하였으며, 분광혼합 알고리즘을 활용하여 초분광 HNS를 탐지하였다. 전처리 과정으로 주성분 분석을 적용하여 노이즈 제거 및 차원 압축을 수행하였으며, N-FINDR 기법을 통해 영상을 대표하는 톨루엔과 해수의 엔드멤버 스펙트럼을 추출하였다. 스펙트럼 기반의 톨루엔 및 해수의 점유비율을 계산함으로써 모든 픽셀의 HNS 탐지 정확도를 확률로 제시하였다. 최대 탐지 정확도를 가지는 점유비율 선정을 위해 418.15 nm 파장의 복사도 영상과 비교하였으며, 그 결과 약 42%의 비율에서 99% 이상의 정확도를 나타내었다. 해상 HNS 유출은 높은 위험성으로 인해 사람이 쉽게 접근할 수 없는 한계를 지닌다. 본 HNS 실험과정 및 탐지 결과는 초분광 원격탐사에 기반한 HNS 오염 해역 추정에 도움이 될 것이다.

• 한국대기환경학회지
• /
• 제16권1호
• /
• pp.11-22
• /
• 2000

Polycyclic aromatic hydrocarbons(PAHs) have known as potentially hazardous air pollutants(HAPs0 to human health because of its carcinogenic and mutagenic behaviors. The purpose of this study was to determine the level of 6 PAHs(Fluoranthene, Pyrene, Benzo[a]anthracene, Chrysene, Benzo[b]fluoranthene, and Benzo[a]pyrene) as well as 10 inorganic elements(Cr, Na, K, Zn, Pb, Fe, Cu, Ti, Al and Cd) in the ambient PM-10. The total of 115 samples had been collected from February, 1996 to June, 1996 on quartz fiber by a PM-10 high volume air sampler near the Yong-Tong Apartment complexes. A statistical analysis was performed for the PAHs and inorganic elements data set using a principal component analysis in order to identify qualitatively the potential sources of PM-10. A total of 6 principal components were separated by intensive data pretrement and transformation processes, such as soil, refuse incineration, oil burning, coal burning, field burning, vehicle emission sources. The results showed that PAHs were associated with various burning activities like refuse and field burning, coal burning, and oil burning emissions in the study area. These derived sources were well matched with the previously known source profiles in terms of compositonal order and level of measured species. The combination data set consisted of both organic and inorganic species might provide more powerful source signature and might increase the number of potentially derived sources than PAHs or inorganic data alone.

• 한국수산과학회지
• /
• 제51권6호
• /
• pp.623-631
• /
• 2018

The present study investigated the food component characteristics of a bone-softened mackerel Scomber japonicus product (FC-M). The proximate composition of the FC-M was 57.4% moisture, 25.2% crude protein, 14.1% crude lipid, and 2.7% ash. The energy in the FC-M was 241.5 kcal/100 g, which corresponds to 8.9-16.1% of the daily energy intake recommended for Koreans ${\geq}6$ years of age. Regardless of type of taste, there were no significant differences in taste intensity when the FC-M was compared to a control (canned mackerel) but the odor intensity was significantly higher. Although there were no significant differences in hardness, the Hunter color values of redness and yellowness were significantly lower than those of the control. The sensory score for the FC-M was significantly superior to that of the control. The total amino acid content in the FC-M was 24.12 g/100 g and the major amino acids were aspartic acid, glutamic acid, leucine, and histidine. The major fatty acids in the FC-M were 16:0, 18:1n-9, 20:5n-3, and 22:6n-3 and the FC-M was a good source of minerals.

• 에너지공학
• /
• 제13권2호
• /
• pp.133-143
• /
• 2004

Simultaneous removal technology of particulate/NOx/SOx/HCl using CuO/3Al$_2$O$_3$ㆍ2SiO$_2$catalyst impregnated ceramic candle filters is an advanced air pollution process and provides significantly to reduce hazardous gases emitted from coal-fired power plant. This process uses a high-temperature catalytic filter for integrating SOx and HCl reduction through injection an alkali sorbent (such as hydrated lime or sodium bicarbonate), NOx removal through ammonia injection and selective catalytic reduction (SCR), and particulate collection on the catalytic filter surface. The advantages of the process include : compact integration of the emission control technologies into a single component; easy handling of dry sorbent and by-product; and improved SCR catalytic life due to lowered SOx, HCl and particulate levels. CuO/3Al$_2$O$_3$ㆍ2SiO$_2$ catalyst impregnated ceramic candle filters showed a possibility of simultaneous treatment from results which have ascertained high removal efficiency at various combined gases conditions, and in pilot plant test for 3 months, NO conversion was showed 90% over.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.365-370
• /
• 2004

The integration of intelligent devices, devices-level networks, and software into motor control systems can deliver improved diagnostics, fast warnings for increased system reliability, design flexibility, and simplified wiring. Remote access to motor-control information also affords an opportunity for reduced exposure to hazardous voltage and improved personnel safety during startup and trouble-shooting. This paper presents LonWorks fieldbus networked intelligent induction control system architecture. Experimental bed system with two inverter motor driving system for controlling 1.5kW induction motor is configured for LonWorks networked intelligent motor control. In recent years, MCCs have evolved to include component technologies, such as variable-speed drives, solid-state starters, and electronic overload relays. Integration was accomplished through hardwiring to a programmable logic controller (PLC) or distributed control system (DCS). Devicelevel communication networks brought new possibilities for advanced monitoring, control and diagnostics. This LonWorks network offered the opportunity for greatly simplified wiring, eliminating the bundles of control interwiring and corresponding complex interwiring diagrams. An intelligent MCC connected in device level control network proves users with significant new information for preventing or minimizing downtime. This information includes warnings of abnormal operation, identification of trip causes, automated logging of events, and electronic documentation. In order to show the application of the multi-motors control system, the prototype control system is implemented. This paper is the first step to drive multi-motors with serial communication which can satisfy the real time operation using LonWorks network.

• Journal of Photoscience
• /
• 제9권2호
• /
• pp.457-459
• /
• 2002

Sunlight causes various types of adverse skin changes on the sun-exposed areas of the skin, in which the most hazardous one is the induction of malignant skin tumours. FT -IR spectra were obtained from specimens excised from normal skin, BCCs, SCCs, MMs, nevi, lesions of solar keratosis and Bowen's disease. Tissue samples from freshly frozen specimens were cut into 2 sections in strictly sequential order to be stained with H & E for histopathological analysis, and then to be air-dried on CaF$_2$ slide glasses for further spectral data acquisition from defined area of interest. Intra- and inter-sample variations were estimated within grouped lesion categories according to each skin component. Mean spectra for each type of tissue pathology in the 800-1800 $cm^{-1}$ / region was interpreted using the classical group frequency approach that showed the most visible differences in spectra of benign, premalignant and malignant changes directly related to protein conformation and nucleic acid bases. The relative intensity of the nucleic acid peak was increased with progression to malignancy. In addition, PCA was able to evaluate and maximise the differences in the spectra by reducing the number of variables characterizing each patient and pathology category. This type of approach to non-destructively estimate the complexity of IR-spectra of inhomogeneous samples such as skin demonstrates the advantage of FT -IR microspectroscopy to be able to observe diseased states (benign, premalignant, malignant) and distinguish them from normal against a huge background of inter- and intra-subject variability.

• 미생물학회지
• /
• 제49권2호
• /
• pp.211-214
• /
• 2013

비스페놀 A (BPA)는 내분비계 장애물질의 하나로서 인간에게 큰 위협이 되고 있는 물질이다. 따라서 BPA의 분석 및 제거를 위해 BPA에 대해 선택적 친화성을 보이는 특정 리간드 탐색이 요구되고 있다. 본 연구에서는 초음파 처리를 동반한 바이오패닝 기법을 이용하여 파지 표면 디스플레이 라이브러리로부터 BPA에 친화성이 높은 펩타이드 서열을 탐색하였다. BPA 입자에 대한 6라운드의 positive 스크리닝과 에펜도르프 튜브 표면 재질에 대한 negative 스크리닝 과정을 실시하였고, 이를 통해 BPA에 선택적 친화성이 높은 CysLysSerLeuGluAsnSerTyrCys (CKSLENSYC) 서열을 스크리닝하였다. 또한 확보된 서열의 선택적 친화성을 검증하기 위해 BPA와 구조가 유사한 비스페놀 F (BPF), 비스페놀 S (BPS)에 대해서 교차 친화성이 있는지 평가하였고, 앞에서 선택된 서열이 BPS, BPF에 비하여 상대적으로 BPA에 대한 친화성이 높다는 것을 확인하였다.

• 보건교육건강증진학회지
• /
• 제15권2호
• /
• pp.1-21
• /
• 1998

The industrial health education is the most fundamental and active area in the industrial health. It has become increasingly recognized as an important component of preventive occupational health programs and is an essential service for improvement of productivity and employee's health. Evaluating the worker's health status is a part of the occupational health promotion policy and is very important to know the efficiency of the occupational health service. In this point, the purpose of this study was to clarify the effect of the industrial health education on worker's health status. This study included a survey of 625 workers at 28 factories in Puchon area form August Z7 to September 30, 1996. The research was carried out through the analysis of the self-administered questionnaires and health examination records. The results were as follows: 1. For demographic characteristics, 66.5% of the respondents were male. The most prevalent age group was 30 - 39years group(30.4%). Those who graduated from high school were 43.5%. The workers whose monthly income ranged from 600,000 to 100,000 won were 40.3%. As for the marital status, 69.4% of the respondents were married. 2. For occupational characteristics, 37.9% of the workers had worked 2 to 5 years in the factories, 69.4% of the respondents worked at the assembly line and the staffs were 27.0%. T26.4% of the respondents worked at hazardous workplace and 71.8% of the workers worked 9 to 10 hours a day. Those who worked during the night were 56.0%. Those who felt much for them workload were 29.9% and were dissatisfied with their working environment and job were 33.6%, 19.1%. 3. The 39.4% of the respondents received the industrial health education and most of them received on the safety and only few on family health. 70.7% out of those who had industrial health education reported it helped their health management.

• 한국환경보건학회지
• /
• 제37권5호
• /
• pp.369-375
• /
• 2011

Objectives: Exposure to hazardous chemicals during pregnancy may result incritical reproductive health outcomes. Indoor residential levels are significant component of personal exposure. The collection of residential exposure data has been hampered by the cost and participant burden of health studies of indoor air pollution. This study utilized a participant-based approach to collect volatile organic compounds concentration from homes. Methods: Four hundred thirteen women were recruited from three major hospitals in Seoul and Gyeongi Provence and 411 agreed to participate. A passive sampler (OVM 3500, 3M, USA) with instructions were given to the participants, as well as a questionnaire. They were asked to deploy the sampler in their homes for three to five days and return them viapre-stamped envelope. Results: Three hundred forty six participants returned the sampler. Among the returned samplers, three hundred samplers satisfied our monitoring quality criteria. The success rate of the monitoring method was 73%. The geometric mean of TVOC level was 429(2) ${\mu}g/m^3$. The TVOC guideline of 500 ${\mu}g/m^3$ was exceeded in 38% of the houses. The residential VOC levels were significantly associated with remodeling of the house. Conclusions: The results suggested that a participant-based sampling approach may be a feasible and costeffective alternative to exposure assessment involving home visits by a field technician.

• 대한토목학회논문집
• /
• 제4권2호
• /
• pp.1-11
• /
• 1984

본연구(本硏究)는 평면교차점(平面交叉點)을 대상(對象)으로 하여 교통사고(交通事故)와 그 요인간(要因間)의 상호관련성(相互關聯性)을 통계적(統計的)으로 분석(分析)하고 사고예측(事故豫測)모델의 작성(作成)과 예측(豫測)모델을 이용(利用)한 교차점(交叉點)의 위험도(危險度) 평가방법(評價方法)에 대(對)한 연구(硏究)이다. 사고예측(事故豫測)모델은 주성분분석(主成分分析)에 의(依)하여 선택(選擇)된 설명지표(說明指標)를 사용(使用)하고 최량(最良)모델식(式)을 얻기 위하여 단계적(段階的) 회귀분석(回歸分析)에 의(依)하였으며 작성(作成)된 모델은 통계적(統計的)으로 유의(有意)하였다. 그리고 교차점(交叉點) 안전대책(安全對策)의 수립(樹立)은 위험교차점(危險交叉點) 추출(抽出)이 전제(前提)가 되므로 사고예측(事故豫測)모델을 이용(利用)한 위험교차점(危險交叉點)의 추출방법(抽出方法)을 제안(提案)하였다. 추출(抽出)된 위험교차점(危險交叉點)이 실제(實際)의 사고다발교차점(事故多發交叉點)과 잘 일치(一致)되었다.