• Restorative Dentistry and Endodontics
• /
• v.38 no.1
• /
• pp.11-20
• /
• 2013

Objectives: In most retrospective studies, the clinical performance of restorations had not been considered in survival analysis. This study investigated the effect of including the clinically unacceptable cases according to modified United States Public Health Service (USPHS) criteria into the failed data on the survival analysis of direct restorations as to the longevity and prognostic variables. Materials and Methods: Nine hundred and sixty-seven direct restorations were evaluated. The data of 204 retreated restorations were collected from the records, and clinical performance of 763 restorations in function was evaluated according to modified USPHS criteria by two observers. The longevity and prognostic variables of the restorations were compared with a factor of involving clinically unacceptable cases into the failures using Kaplan-Meier survival analysis and Cox proportional hazard model. Results: The median survival times of amalgam, composite resin and glass ionomer were 11.8, 11.0 and 6.8 years, respectively. Glass ionomer showed significantly lower longevity than composite resin and amalgam. When clinically unacceptable restorations were included into the failure, the median survival times of them decreased to 8.9, 9.7 and 6.4 years, respectively. Conclusions: After considering the clinical performance, composite resin was the only material that showed a difference in the longevity (p < 0.05) and the significantly higher relative risk of student group than professor group disappeared in operator groups. Even in the design of retrospective study, clinical evaluation needs to be included.

• Spatial Information Research
• /
• v.19 no.4
• /
• pp.1-10
• /
• 2011

This research examined relationships between Scientifically Estimated Environmental Risks (SEERs) of floods, hurricanes and hazardous material releases, and household characteristics. This research showed that there were no statistically significant relationships between most of the demographic characteristics (age, household size, tenure at the present home) and SEERs of the two natural hazards (a flood and a hurricane). These results support Drabek's findings (1986) that people tend to underestimate or ignore natural hazards in selecting their residence regardless of age, household size, and house tenure. Educational attainment and yearly household income were positively correlated with hurricane risk, but not with flood risk. By contrast, SEER of hazardous materials was correlated with all demographic characteristics mentioned above. This result may show that those who are relatively poorer and have lower educational level tend to be limited to living in communities more vulnerable to human-made risk.

• Journal of the Korean Institute of Gas
• /
• v.21 no.4
• /
• pp.30-41
• /
• 2017

Although chemical substances have greatly contributed to prosperous human life and industrial development and made a great contribution to humanity, some dangerous substances are harmful to health and the environment. Thus, so long ago developed countries have also established strict safety standards. Korea is growing into a major chemical market, accounting for 3.4% of the global chemical market. The domestic laws related to chemical substances are similar to foreign countries, but there are many differences in detail, posing a lot of risks to safety, health and the environment as well as causing many problems in industry. In order to improve these problems, this study carried out to unify the domestic chemical law and the international standardization system (GHS) and to solve the trade barriers in the export and import by industry. In addition, researchers proposed a unified approach to classification and division of physical hazards, as advanced as developed nations, as a basis for prevention and response to accidents in dangerous goods.

• Journal of Food Hygiene and Safety
• /
• v.20 no.1
• /
• pp.36-42
• /
• 2005

The purpose of this study is to develope a HACCP model for Korean traditional cookies. Prerequisite program and HACCP plan were proposed and analyzed for Yugwa. After analysing hazards of raw material and manufacturing processes, CCP, CL and control methods were presented. Pathogenic microorganisms were detected at the Korean traditional cookies plant. It gave a clue that general sanitation control procedures should be implemented for safe traditional cookie products. Hazard analysis of raw materials and processing of Korean traditional cookies, determination of critical control points and critical limits at the plant lead to present a model of HACCP plan. Implementation of HACCP can be carried out using a HACCP model. Critical control point of Yugwa production were determined as frying process. Biological and chemical hazards were presented for CCP determination.

• Journal of Environmental Health Sciences
• /
• v.44 no.2
• /
• pp.196-203
• /
• 2018

Objectives: The purpose of this study was to assess environmental risk on the emerging contaminants of concern, such as ivermetin, parziquantel, tamiflu and triclosan. Furthermore, we tried to provide a more efficient management practice and a basis for future studies of risk assessment on those substances. Methods: Predicted no effect concentration (PNEC) and predicted environmental concentration (PEC) were determined through modeling and literature reviews. Environmental risk assessment was evaluated by calculating HQ (hazard quotient) by a comparison of PEC (or measured environmental concentration (MEC)) and PNEC. Results: HQ value of tamiflu calculated from MEC was 1.9E-03. For ivermectin and triclosan, the HQ values were not available because these were not detected in the aquatic environment. The toxicity of ivermectin and triclosan showed a very low value, indicating a high level of HQ. However, praziquantel can be categorized into the material that do not require management since they have less than HQ 1. Conclusion: Based on the results of the initial risk assessment, it is assumed that the ivermectin and triclosan have potential to cause direct adverse effects on the aquatic environment. To conduct an accurate environmental risk assessment, the further study on PEC estimation of such contaminants should be actively carried out.

• Journal of Environmental Health Sciences
• /
• v.46 no.5
• /
• pp.555-564
• /
• 2020

Objectives: To identify and investigate through qualitative and quantitative analysis the hazardous substances generated when compressed wood was burned at a live fire-training center. Methods: Four types of compressed wood that are actually used in live fire training were burned in a chamber according to KS F2271. The gaseous material was sampled with a gas detector tube and conventional personal samplers. Results: 1,3-butadiene, benzene, toluene, xylene, formaldehyde, hydrogen chloride, hydrogen cyanide, ammonia, carbon monoxide, and nitric acid were detected. In particular, 1,3-butadiene (497.04-680.44 ppm), benzene (97.79-125.02 ppm), formaldehyde (1.72-13.03 ppm), hydrogen chloride (4.71-15.66 ppm), hydrogen cyanide (3.64-8.57 ppm), and sulfuric acid (3.85-5.01 ppm) exceeded the Korean Occupational Exposure Limit as measured by sampling pump according to the type of compressed wood. Conclusions: We found through the chamber testing that firefighters could be exposed to toxic substances during live fire training. Therefore, firefighter protection is needed and more research is required in the field.

• Fire Science and Engineering
• /
• v.14 no.2
• /
• pp.33-38
• /
• 2000

Flux, essentially used in soldering process of PCB (Printed Circuit Board) in electronics industry, contains IPA (Isopropyl alcohol) and methanol, which are highly inflammable and explosive. Hazard Chemical Controlling Law classified methanol as toxic material and Environmental Law classified methanol as VOC (Volatile Organic Compound). So there have been pressing needs of developing substitutes for the existing Flux. New solvent which is non-flammable and main component is DCP having same specific character of the existing Flux. It's been combirated with proper composition ratio adding stabilizer. As a result, it relieved working Environment Allowance thickness 200 ppm to 470 ppm, chance of not been soldered 0.083% to 0%, spread 85% to 87%, power saving resistance 1.0$\times$$10^{12}$$\Omega$ to 6.9$\times$$10^{12}$$\Omega$, which means a lot better than the existing Flux. Therefore, Flux confirmed the chance of improving productivity, safety, environment safety and quality. Also, Flux got a satisfied result after product quality test and product reliability test.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.6
• /
• pp.735-747
• /
• 2018

Radon radiation exposures in home have been posed as a potential cancer hazard. This research aims to present the basic data of the indoor radon concentration level by examining the radon exhalation rates of wood species. Radon exhalation rates from five commonly used wood species in Korean wood building construction were measured with Continuous Radon Monitor (CRM), Model 1028 (Sun Nuclear Co., USA) using the Closed Chamber Method (CCM). The mass exhalation rate was observed to vary from $0.00089Bq{\cdot}kg^{-1}{\cdot}h^{-1}$ to $0.00181Bq{\cdot}kg^{-1}{\cdot}h^{-1}$, whereas the surface exhalation rate was observed to be $0.00677-0.01517Bq{\cdot}m^{-2}{\cdot}h^{-1}$. The radon exhalation rate of Quercus accutissima Carruth (white oak) which has the highest density showed the highest figure among the five wood species, on the other hand, the rest of four species showed similar results which were similar to the radon exhalation rates of wood in the U.S.A. and Canada. The average of the concentration measured by the CCM represented well up to the second half-life period (7.7 days). Because result of these small quantities seems to indicate that radon exhalation from the tested wood species has almost negligible impact, the main culprit of the high indoor radon concentration is clearly derived from the background of surrounding wood house. Therefore, as a safety precaution, infrastructures made of wood materials should be designed with the consideration of influx of radon and built accordingly. Furthermore, it is highly desirable that wood will be needed to use for furniture and interior finishing material in indoor environment.

• Journal of the Korean Institute of Gas
• /
• v.22 no.4
• /
• pp.13-26
• /
• 2018

Currently, local regulations, such as KS Code, do not clearly specify how to calculate the range of hazardous area, so the dispersion modeling program should be used to select dispersion. The purpose of this study is to present a methodology of determining the range of hazardous area which is simpler and more reasonable than modelling by using representative materials and process conditions. Based on domestic and overseas regulations that are currently in effect, variables affecting distance to LFL(Lower Flammable Limit) were selected. A total of 16 flammable substances were modelled for substance variables, process conditions variables, and weather conditions variables, and the statistical analysis selected the variables that affect them. Using the selected variables, a three-step classification method was prepared to select the range of locations subject to explosion hazard.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.6
• /
• pp.2991-2995
• /
• 2012

Background: India shows some of the highest rates of cervical cancer worldwide, and more than 70% of the population is living in rural villages. Prospective cohort studies to determine the risk factors for cervical cancer are very rare from low and medium resource countries. The aim of this study was to quantify the effect of risk factors related to cervical cancer in a rural setting in South India. Material and methods: Sociodemographic and reproductive potential risk factors for cervical cancer were studied using the data from a cohort of 30,958 women who constituted the unscreened control group in a randomised screening trial in Dindigul district, Tamilnadu, India. The analysis was accomplished with the Cox proportional hazard regression model. Results: Women of increasing age (HR=2.4; 95% CI: 1.6, 3.8 in 50-59 vs 30-39), having many pregnancies (HR=7.1; 1.0, 52 in 4+ vs 0) and no education (HR=0.6; 0.2, 0.7 in high vs none) were found to be at significantly increased risk of cervical cancer. Conclusion: This cohort study gives very strong evidence to say that education is the fundamental factor among the sociodemographic and reproductive determinants of cervical cancer in low resource settings. Public awareness through education and improvements in living standards can play an important role in reducing the high incidence of cervical cancer in India. These findings further stress the importance of formulating public health policies aimed at increasing awareness and implementation of cervical cancer screening programmes.