• Corrosion Science and Technology
• /
• v.4 no.5
• /
• pp.201-206
• /
• 2005

Starting with the meaning of the word quality, diverse concepts connoted by the term are examined. Instead of a bathtub curve, the desirable shape of a failure rate covering the entire life of a good product, which might be called hockey-stick line, is introduced. From the hockey-stick line and the definition of reliability, two measurements are extracted. The terms r-reliability (failure rate) and durability (product life) are explained. The conceptual analysis of failure mechanics explains that reliability technology pertains to design area. The desirable shape of hazard rate curve of electronic items, hockey-stick line, clarifies that Mean-Time-to-failure (MTTF) as the inverse of failure rate can be regarded a nominal life. And Bx life, different from MTTF, is explained. Reliability relationships between components and set products are explained. Reshaped definitions of r-reliability and durability are recommended. The procedure to improve reliability and the reasons for failing to identify failure mode are clarified in order to search right solutions. And generalized Life-Stress failure model is recommended for the calculation of acceleration factor.

• 한국데이터정보과학회:학술대회논문집
• /
• 2002.06a
• /
• pp.155-167
• /
• 2002

In this paper we consider optimal designs of partially constant-stress life testing which is deviced for three-component mixed systems with the considerably long time. Mixed systems are jointed serial system with parallel system. Test items are run at both use condition and accelerated condition until a specified censoring time. The optimal criterion for the sample-proportion allocated to accelerated condition is to minimized asymptotic variance of the maximum likelihood estimators of the acceleration factor and hazard rates.

• Journal of the Korean Society of Safety
• /
• v.12 no.1
• /
• pp.60-70
• /
• 1997

Since, human error is a major factor contributing to disaster during start-up of operation in Boiler plant. it is necessary to develop an automation system which prevent mode of operation that are known to be dangerous and to bring a loss of energy. The aim of this study is to suggest a model for the computer-aided synthesis of operation sequence as a part of automation system for start-up operation. Synthesis is accomplished by the formation of a hierarchical network of goals which decide sequence of operations. Hierarchical Network is formed by using method which upper goals ( i.e. upper operation al situation) are classified by the function of themselves into lower goals (i.e. lower operational situation). Knowledge for deciding operation sequence is generated by putting In order the knowledge of hazard operation and energy management.

• Journal of Korea Multimedia Society
• /
• v.18 no.2
• /
• pp.218-232
• /
• 2015

According to the development of information processing technology and mobile communication technology, the utilization of mobile banking systems is drastically increasing in banking system. In the foreseeable future, it is expected to increase rapidly the demands of mobile banking in bank systems with the prevalence of smart devices and technologies. However, the keeping 'security' is very important in banking systems that handles personal information and financial assets. But it is very difficult to improve the security of banking systems only with the vulnerabilities and faults analysis methods of information security. Hence, in this paper, we accomplish the analysis of security risk factor and security vulnerability that occur in mobile banking system. With analyzed results, we propose the information security control and management processes for assessing and improving security based on the mechanisms which composes mobile banking system.

• Fire Science and Engineering
• /
• v.21 no.2 s.66
• /
• pp.14-23
• /
• 2007

In this thesis, we analysed urban fires and developed the predictive mapping technique by using GIS and spatial statistics. It presented the correlation between the fire data of last 5 years ($2001{\sim}2005$) and the factor of civilization environment in Daegu city. We produced a model of fire hazard predictive map by analyzing uncertainty of fire with the quadrat analysis and the poisson distribution.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.275-290
• /
• 2013

The main cause of building fire fatalities occur in the combustible material heat, smoke and toxic gases are. Building interior decoration, etc., especially as much of the harmful substances generated during combustion, and, used in domestic architecture wallpaper, ceiling, and other plastics, built-in foam insulation also analyzed recognition of fire hazards approach to test the conkalrorimiteo test, choedaeyeolbangchulryul through, chongbal heat, mass loss rate, generates carbon monoxide gas hazard ratio tests, analysis and evaluation rigid foam index testing the toxicity of hazardous material generated by performing a gas clean up and assess the material test results, the minimum order to provide data to quantify the risk of fire. Ensure fire safety of building materials, composite materials in order to test the various risk factors could be considered organic to the introduction of testing and evaluation is needed urgently.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1250-1257
• /
• 2009

Due to the improvement of the seismic hazard analysis method and the design code, dynamic analysis method is widely used. To conduct dynamic analysis, various coefficients should be designated. The time history acceleration is one of the most essential factor. However, strong earthquake motion data from the outside of the country have been used to conduct dynamic analysis without considering of the ground motion parameters. In this study, the methodology to choose appropriate input motion is developed by using time domain design spectrum matching procedure. Two examples are applied to verify the methodology. The Result shows that the methodology satisfies seismic circumstances and the design code.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.4
• /
• pp.164-168
• /
• 2002

The main hazard leading to breakdown in GIS(Gas Insulated Switchgear) comes from free conducting particles, which can cross between tee electrodes and cause dielectric failure under the influence of the electric field. Bouncing height of the particle can be an important factor to evaluate the possibility of breakdown occurrence. In this paper, how to estimate, outside a GIS, the bouncing height of the particle was newly suggested when GIS is in service. Both experimental results using 362 kV test chamber and computer simulation results on estimating the height were presented and compared with each other.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.2
• /
• pp.57-64
• /
• 2000

본 연구에서는 항만 및 어항시설의 내진설？준서에서 채택하고 있는 수정 Seed와 Idriss 방법을 이용하여 액상화 평가를 수행하고 액상화 가능지수(liquefaction potential index, LPI)와 등가 액상화 안전율(FE)을 이용하여 액상화 가능성에 대한 구역도를 작성하였다. 이 두결과가 유사한 것으로 나타나 등가 액상화 안전율의 적합성을 확인하였다 국내 연안의 두지역에 대하여 Hachinohe 지진기록과 Ofunato 지진기록을 이용한 액상화 가능성 구역도를 FE를 이용하여 작성한 후 비교한 결과 Hachinohe 지진기록에 의한 액상화 가능성 구역도가 더 과소평가되는 경향을 보이는 것으로 나타났다 또한 FE는 안전율의 형태로 표현되었기 때문에 구역도 작성과 해석에 편의 성을 제공하였다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.36
• /
• pp.287-295
• /
• 1995

This paper is concerned with cost analysis model in periodic maintenance policy. Generally periodic maintenance policy in which item is repaired periodic interval times. And in the article minimal repair is considered. Mimimal repair means that if a unit fails, unit is instantaneously restored to same hazard rate curve as before failure. In the paper periodic maintenance policy with minimal repair is as follows; Operating unit is periodically replaced in periodic maintenance time, if a failure occurs between minimal repair and periodic maintenance time, unit is replaced by a new item until tile periodic maintenance time comes. Also unit undergoes minimal repair at failures in minimal-repair-for-failure interval. Then total expected cost per unit time is calculated according to scale parameter of failure distribution. Maintenance cost factors are included operating, fixed, minimal repair, periodic maintenance and new item replacement cost. Numerical example is shown in which failure time of system has weibull distribution.