• Journal of Environmental Science International
• /
• v.24 no.2
• /
• pp.197-205
• /
• 2015

This study was performed to identify the effect of fertilizer application and planting method on growth and yield of 'Seolhyang' strawberry during seedling raising. According to the concentration of fertilizer applied, the height of daughter plants was the highest at an EC of $0.8dS{\cdot}m^{-1}$. Leaf number and crown diameter were greatest at an EC of $0.6-0.8dS{\cdot}m^{-1}$. In the first measurement, root number was highest in non-fertilizer application, while root weight was heaviest in non-fertilizer application and EC $0.4dS{\cdot}m^{-1}$. The higher the concentration of fertilizer applied as culture media, the lower the growth rate. Thirty days after planting on the main field, plant height and number of new leaf were highest at an EC of $0.8dS{\cdot}m^{-1}$. However, no significant difference was found in leaf length and width and chlorophyll content according to fertilizer application. Marketable yield of 25 g or higher was greatest in EC $0.6dS{\cdot}m^{-1}$. In contrast, no significance was found in total marketable yield at an EC of $0.4-0.8dS{\cdot}m^{-1}$. Aconsistent pattern was exhibited in the growth of 1-5 harvesting flower clusters according to planting method. The length of leaf and flower cluster was short and chlorophyll content was low, when bed soil was removed 100% in harvesting of the first flower cluster. In all treatment, leaf length was shortened until harvesting of the second and third flower cluster, but rapidly lengthened in harvesting of the third and fourth flower clusters. Moreover, the length of flower cluster had a increasing tendency from harvesting of the third flower cluster. However, chlorophyll content was reduced continuously until harvesting of the fifth flower cluster, and was lowest in harvesting of the fourth flower cluster without removal of bed soil. Total yield was greatest in treatment of crown removal in bed soil between November and May. Late marketable yield between March and May was highest in treatment of 100% bed soil removal, followed by treatment of crown removal. Marketable yield of 25 g or higher was greatest in treatment of crown removal between December and February, while greatest in treatment of 100% bed soil removal between March and May.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.3
• /
• pp.274-281
• /
• 2005

A new resonant pulse converter for energy harvesting is proposed. The converter transfers energy from a low-voltage AC current to a battery. The low-voltage AC current source is an equivalent of the piezoelectric generator, which converts the mechanical energy to the electric energy. The converter consists of a full-bridge rectifier having four N-type MOSFETs and a boost converter haying N-type MOSFET and P-type MOSFET instead of diode. Switching of MOSFETs utilizes the capability of the $3^{rd}$ regional operation. The operational principles and switching method for the power control of the converter are investigated with the consideration of effects of the parasitic capacitances of MOSFETs. Simulation and experiment are performed to prove the analysis of the converter operation and to show the possibility of the $\mu$W energy harvesting.

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.147-153
• /
• 2017

The purpose of this study was to examine productivity and cost of tree-length harvesting using cable yarding system in a larch (Larix leptolepis) clear-cutting stand located in Pyeongchang-gun, Gangwon-do. We used tree-length harvesting method using cable yarding system with a tower yarder HAM300. The productivity was $17.6m^3/hr$ for felling, $12.4m^3/hr$ for delimbing, $4.2m^3/hr$ for yarding, and $8.1m^3/hr$ for processing. The total cost of the harvesting system was $48,381won/m^3$, which was majorly composed of yarding operation cost, at $40,169won/m^3$ (79.3%), while felling had the lowest cost at $1,154won/m^3$ (4.1%). Major factors affecting felling and processing productivity was tree volume and the number and thickness of branches for delimbing productivity. In addition, we suggest that training and education for machine operators were critical to improve yarding productivity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.87-93
• /
• 2016

In this paper, we propose a RF energy harvesting based routing protocol in mobile ad-hoc wireless sensor networks. The main features and contributions of the proposed routing protocol are as follows. First, establishment of routing route based on both remaining energy of mobile sensor nodes and RF energy harvesting. Second, establishment of routing route by considering availability and stability of route based on energy of mobile sensor nodes to increase lifetime of networks and route. The performance evaluation of the proposed routing protocol using OPNET shows that the routing method considering both route availability and route stability based on RF energy harvesting can increase efficiently route lifetime.

• The Korean Journal of Food And Nutrition
• /
• v.33 no.3
• /
• pp.257-265
• /
• 2020

This study investigated the volatile flavor composition of essential oils from Solidago virga-aurea var. asiatica Nakai with different harvesting area. The essential oils obtained by the hydrodistillation extraction method from the aerial parts of the plants were analyzed by gas chromatography (GC) and GC-mass spectrometry (GC-MS). Ninety-five (91.61%) volatile flavor compounds were identified in the essential oils from the S. virga-aurea var. asiatica Nakai harvested in Koheung, Jeolanamdo. The major compounds were hexadecanoic acid (29.22%), 7-hexyl eicosane (9.12%), spathulenol (7.701%), 3,8-dimethyl decane (6.48%), caryophyllene oxide (4.52%) and α-copaene (4.23%). Fifty-seven (97.43%) volatile flavor compounds were identified in the essential oils from the S. virga-aurea var. asiatica Nakai harvested in Seoguipo, Jejudo. The major compounds were 2-carene (40.95%), α-copaene (10.77%), α-muurolene (5.81%), and spathulenol (3.11%). The chemical composition of the essential oils was significantly different in quality and quantity with the different harvesting area. The quantitative variations of hexadecanoic acid, 7-hexyl eicosane, spathulenol, 3,8-dimethyl decane, caryophyllene oxide, 2-carene, and α-copaene according to different harvesting area can serve as a quality index of the S. virga-aurea var. asiatica Nakai essential oils in food industries.

• Journal of Biosystems Engineering
• /
• v.40 no.1
• /
• pp.28-34
• /
• 2015

Purpose: This study aimed to install an RTK-GPS (Real Time Kinematic-Global Positioning System) and IMU (Inertial Measurement Unit) on a tractor used in a farm to measure positions, pasture topography, posture angles, and vibration accelerations, translate the information into maps using the GIS, analyze the characteristics of grass harvesting work, and establish new technologies and construction standards for pasture infrastructure improvement based on the analyzed data. Method: Tractor's roll, pitch, and yaw angles and vibration accelerations along the three axes during grass harvesting were measured and a GIS map prepared from the data. A VRS/RTK-GPS (MS750, Trimble, USA) tractor position measuring system and an IMU (JCS-7401A, JAE, JAPAN) tractor vibration acceleration measuring systems were mounted on top of a tractor and below the operator's seat to obtain acceleration in the direction of progression, transverse acceleration, and vertical acceleration at 10Hz. In addition, information on regions with bad workability was obtained from an operator performing grass harvesting and compared with information on changes in tractor posture angles and vibration acceleration. Results: Roll and pitch angles based on the y-axis, the direction of forward movements of tractor coordinate systems, changed by at least $9-13^{\circ}$ and $8-11^{\circ}$ respectively, leading to changes in working postures in the central and northern parts of the pasture that were designated as regions with bad workability during grass harvesting. These changes were larger than those in other regions. The synthesized vectors of the vibration accelerations along the y-axis, the x-axis (transverse direction), and the z-axis (vertical direction) were higher in the central and northwestern parts of the pasture at 3.0-4.5 m/s2 compared with other regions. Conclusions: The GIS map developed using information on posture angles and vibration accelerations by position in the pasture is considered sufficiently utilizable as data for selection of construction locations for pasture infrastructure improvement.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.55-59
• /
• 2016

Conventional RF energy harvesting systems can harvest energy and decode information from same source as an Hybirid-AP (H-AP). However, harvesting efficiency is seriously dependent on distance between users and H-AP. Therefore, in this paper, we proposed a transmission model for RF harvesting consisting of information and power source separately called Decoupled RF Energy harvesting networks. Main purpose of this paper is to maximize energy efficiency under various constraints of transmit power from H-AP and power beacon (PB), minimum quality of service and quality of harvested power of each users. To measure proposed model's performance, we proposed optimal time scheduling algorithms for energy efficiency (EE) maximization using Lagrangian dual decomposition theory that locally maximizes the EE by obtaining suboptimal values of three arguments : transmit power of H-AP, transmit power of PB, frame splitting factor. Experiment results show that the proposed energy-efficient algorithms converge within a few iterations with its optimality and greatly improve the EE compared to that of baseline schemes.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1273-1283
• /
• 2012

In this paper, vision-based positioning algorithm for melon harvesting robot is presented. RGB value of the input image was converted into HSI value then, melon area was extracted after performing the binarization using HUE value. After morphological filtering was applied to remove noise, outermost boundary points were obtained using border following and convex hull method. Elliptical fitting for melons was perform by the RANSAC algorithm, the center point of ellipse, the length of the short and long axis, and rotation angle were obtained. We verified the effectiveness of the proposed method by various simulation experiments and confirmed actual feasibility of the proposed method by applying to the real melon.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.8
• /
• pp.1286-1298
• /
• 2008

This study was attempted to examine the indigo dyeing technique in the latter Joseon Dynasty, and to find diachronic specifics in the indigo dyeing method from 17C to 19C. The results are as follows: First, There were 2 kinds of indigo species-Yoram(Polygonum tinctorium Lour.) and Sungram(Isatis tinctoria L.)-in the latter Joseon Dynasty. Dangram was preferred in particular among Yoram species because of its high dyeing efficiency. Sungram was mainly used for making Jeon(indigo sediment). Second, Yoram cultivation took the following order: Sowing in April${\rightarrow}$planting out in June${\rightarrow}$harvesting leaves in August${\rightarrow}$collecting seeds in September. Sungram had more harvesting times and wider harvesting period than Yoram. Third, all indigo dyeing methods were grouped into two categories, one was temporary dyeing method, the other was permanent dyeing method. Mixture dyeing of the boiled and the raw, raw leaves dyeing, and fermentation dyeing belonged to the temporary dyeing. Jeon dyeing and Gaeogi dyeing belonged to the permanent dyeing. Finally, diachronic specifics from 17C to 19C were as follows: Decline in the mixture dyeing of the boiled and the raw, development in the raw leaves dyeing, continuance of the fermentation dyeing, and naturalization of Jeon dyeing technique.

• 대한치과보철학회:학술대회논문집
• /
• 2006.04a
• /
• pp.100-100
• /
• 2006