• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1134_1135
• /
• 2009

태양광발전 출력은 인버터를 통하여 상업용 전력계통에 연계된다. 소형 태양광발전 전력은 다수의 수용가를 포함하고 있는 기존의 22.9kV 배전선로에 직접 연결되며, 비선형 전력전자소자로 구성된 인버터는 고조파를 발생하게 된다. 본 논문은 태양광발전소 고조파를 실측하여 이를 모델로 연계 전력계통에 미치는 고조파 영향을 전력계통 해석 도구인 소프트웨어로 분석한 것이다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1217-1222
• /
• 2013

It is very important to diminish noise source of electric motor systems that are used for home appliance area. We have studied on the noise reduction of BLDC motor, mainly focusing on reducing noise source from cogging torque. This noise source causes resonance of fan & motor systems. This study showed that the higher harmonic component of the cogging torque was the main factor for noise generation. Therefor, to reduce noise of bldc motor for refrigerator, this study suggested peanut shaped magnet which surface flux has similar sinusoidal wave form.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.252-254
• /
• 2000

For many years, electric utility has used sustained interruption rates as a reliability index. Today, however, many electricity consumers are adversely affected by more subtle voltage disturbances such as harmonic distortion. This paper deals with observations of events that occur in the Dimmer circuits and phase control which could affect harmonics problem to the commercial power system. In order to reduce the effect of harmonics and design filters, Solid State Relay Dimmer(SCRs or TRIACs) and Noise Filter are described, and the effects of harmonics is also analyzed. IGBT Dimmer which is appropriate method to reduce harmonics and improve efficiency is introduced.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.69-75
• /
• 2001

A new method to calculate the aeroacoustic pressure of a centrifugal fan was developed The fan consists of an impeller, diffuser and circular casing. Due to the high rotating velocity and the small gap between the impeller and diffuser, the centrifugal fan makes very high noise level at BPF and its harmonic frequencies. The aeroacoustic pressure is calculated acoustic analogy In this paper, only dipole term is considered in the equation. The acoustics generated by moving impeller and stationary diffuser is calculated separately. The unsteady flow field data is calculated by the vortex method The predicted acoustic pressure agrees very well to the measured data. The difference of the two is smaller than 3dBA.

• Korean Journal of Optics and Photonics
• /
• v.6 no.1
• /
• pp.16-20
• /
• 1995

We have studied the spectral narrowing characteristics of the tunable Ti:sapphire laser pumped by the second harmonic generation of Nd:YAG laser. Ti:sapphire laser has uniform excitation distribution by both-side end pumping. We have controlled the angle of grating linearly and achieved the continuous selection of wavelength in the broad range from 705 to 835 nm. The output energy of $380{\mu}J$ at 790 nm. the spectral linewidth of $0.13cm_{-1}$ and the beam divergence of 1.2 mrad have been obtained. The wavelength range with power more than 50% of maximum output was 730-825 nm.825 nm.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.420-423
• /
• 2010

We fabricated 1 mm-thick periodically-poled lithium niobate (PPLN) crystals by using a high-voltage amplifier for standard electric field poling combined with a voltage multiplier. Furthermore, two 1 mm-thick PPLNs were directly bonded to make a 2 mm-thick PPLN. The large aperture allowed broad angular tuning, and a broad spectral range of quasi-phase matched second-harmonic generation can be achieved in a single channel. High-power applications are also expected.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.547-551
• /
• 1995

We analyze the nonlinearity of chiral media and coupled-mode theory of chiral multilayers. In first topic, second order nonlinear coupled equations are constructed and a phase matchine method is suggested. This approach can be developed to higher order nonlinearity and electric-field-induced second harmonic generation. In second topic, coupled mode equation in chiral multilayers is constructed, and solved for both codirectional coupling and contradirectional coupling. There is a previous formulation about chiral mutilayers[1] with 4$\times$4 matrix but it did not give detail results, so this approach will be compared with that.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.1
• /
• pp.29-34
• /
• 2012

Due to the increasing of nonlinear loads such as converters and inverters connected to the electric power distribution system, and extensive application of harmonic generation sources with power electronic devices, disturbance of the electric power system and its influences on industries have been continuously increasing. Thus, it is difficult to construct accurate load model for active and reactive power in environments with harmonics. In this research, we develop a load modeling method based on Extreme Learning Machine(ELM) with fast learning procedure for residential loads. Using data sets acquired from various residential loads, the proposed method has been intensively tested. As the experimental results, we confirm that the proposed method makes it possible to effective estimate active and reactive powers than conventional methods.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.494-497
• /
• 2002

The influence of isomeric state of doped azo dye on the $B_7$ phase of bent-shaped liquid crystal (LC) is studied. It was found that modulating the isomeric trans-cis state of azo dye can change the molecular arrangement of the bent-shaped LCs. To identify these phenomena the observations of microscopic texture, electro-optic response, second harmonic wave generation (SHG) and switching current were carried out..

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.216-217
• /
• 2010

This paper presents a new software-based on-line dead-time compensation technique for single-phase grid-connected photovoltaic (PV) inverter system. To improve the mitigation of dead-time effect around the zero-crossing point of phase current, a selective harmonic elimination of instantaneous feedback current is used as an additional part of conventional current control scheme. Simulation and experimental results are shown to verify the effectiveness of proposed compensation method in the grid-connected power distributed generation systems.