• 한국학교ㆍ지역보건교육학회지
• /
• 제18권3호
• /
• pp.97-106
• /
• 2017

Objectives: The purpose of this study was to examine cognition about harmful use of alcohol among female university students. Methods: The data were collected by questionnaire from the 389 female university students. The analysis of the data was used by SPSS program(ver. 18.0). Technical statistics analysis was used in general characteristics and drinking related characteristics and drinking related cognition of objects. Logistic regression was used in factors affecting on cognitive degree of drinking evil. Results: Cognitive degree of drinking evil was low as more drinking related outlay expenses and was low as more moderation in drinking and publicity experience. Conclusions: University and the government authorities must consider the seriousness and importance of the problem and enforce moderation in drinking and publicity for female university students and develop education program and prepare the publicity material.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.27-32
• /
• 2010

This study is to investigate and compare domestic hazardous toys with harmful substances with foreign toys so that we can find out management criteria for in cognitive infants. Actually, commercially used toys have been collected and tested to find out more effective management standard. it is tried to produce evaluation criteria of environmentally harmful substance but variety of product is needed for overcoming actual barrier due to lot of difficulty huge cost, time, objectiveness. Therefore, This study does not cover all the above. Establishment of evaluation criteria for product harmfulness made by Government or Local government should be continued to improve. Foreign reference material for toy product in Europe, USA, Japan have been investigated and domestic product have been collected and tested for containing heavy metals, formaldehyde, phthalate in the study. All the test have been made in accordance with KSM ISO 2124 to measure heavy metal transfer into body. Toy product used for the study have been purchased in the real market and some of them contains harmful elements with over standard. Post management system such as RAPEX to control periodically should be established for plastic toy with low quality product.

• 설비공학논문집
• /
• 제18권8호
• /
• pp.649-655
• /
• 2006

The recent indoor air quality problem in a newly-built apartment house is resulted from the improvement of airtightness performance and the use of the building material contained harmful chemical substances. As a result, these cause indoor air quality gradually to become worse and the harmful effect on occupant health called Sick House Syndrome. The most effective solution to improve the indoor air quality is to encourage the use of green building material. However, if the house is built with general building material, ventilation with outdoor air is alternative to dilute the pollutant concentration. The purpose of this re-search is to find optimum ventilation time in a newly-built apartment house at which the ventilatoris installed. It is found that the HCHO and toluene concentrations are remarkably decreased with the elapse of ventilation time and the concentration reduction rate is increased with increment of air change rate after one hour after operating the ventilator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1127-1130
• /
• 2003

In the last several centuries, humankind have been experienced the material abundance with a development of technical civilization and being industrialized quickly. During the process of this, environmental pollutant have occurred naturally so that humankind have more interests for environment pollutant. Air pollution caused by exhaust from a car is very harmful for human. Most of exhaust from a gasoline engine are $CO_x(CO+CO_2),\;NO_x(NO+NO_2)$, and THC(Total Hydrocarbon). The method to remove these kinds of noxious gases are so many thing such as the three catalysts, $NO_x$ catalysts, Filter and so on. However, although air pollution caused by exhaust from motorcycle have also occurred very much, there is no regulation for motorcycle. In this paper, we studied to remove $CO_x(CO+CO_2),\;NO_x(NO+NO_2)$, THC exhaust from a motorcycle using non-thermal plasma In the result, $NO_x(NO+NO_2)$ concentration was decreased approximately 70% and THC(Total Hydrocarbon) was removed about 40%.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.148-149
• /
• 2020

Currently, the most commonly used EPS insulation material has been mainly used because its ease of adhesion with concrete. However, due to poor adhesion with wallpaper, separate adhesion needs to be strengthened and there are cases of breakage or grooves in the process of dismantling the mold. The biggest problem is that when a fire breaks out, various harmful substances are present and highly flammable. Cork used in this study is a truly eco-friendly building material that is taken from between the outer and inner bark of cork trees and does not damage the wood. Also, it is a porous material that is made up of countless cells and contains an air gap between the cells. It is very light in weight between 0.06 and 0.07 and has excellent insulation with a heat conductivity of 0.04W/mK. In addition, it has high stability in the topic of conversation because it does not produce harmful gas when burned and has self-sustaining properties. However, research on cork, an eco-friendly building material with excellent performance to date, is scarce Therefore, we encourage existing scholars to raise interest in new eco-friendly building materials through this study. It also aims to manufacture insulation boards with new inorganic properties using the low weight and heat conductivity held by the cork.

• Environmental Analysis Health and Toxicology
• /
• 제21권2호
• /
• pp.173-184
• /
• 2006

From the harmfulness expectation test conducted through a toxicity anticipation program, methylcyclohexane turned out to be harmful and simulative, but no carcinogenicity was anticipated. In a four-hour acute inhalation toxicity test, the result showed that lethal concentration ($LC_{50}$) was 3,750 ppm (15,054 mg/L), which was identified as a harmful substance on the basis of the harmful substance classification standard $2 of the Industrial safety and health law. methylcyclohexane fell under the category $4(2,500 substance from the GHS standard acute toxicity harmfulness classification. Also, from subchronic inhalation toxicity test that included 6 hours a day, five days a week, and for 13 weeks, we could observe weight, activity, long term weight, blood and blood biochemical influence from the exposure of test substance. No-observed effect level (NOEL) was determined below $100{\sim}400ppm$ inboth male and female. This material falls under the Category 2 ($50{\sim}250ppm/6hours/90days$) in the GHS (Globally Harmonized System) standard trace long-term whole body toxicity repeated exposure, and can be classified as a harmful substance in accordance with the Industrial Safety and Health Law harmful substance standard $NOEL{\leq}0.5mg/L/6hr/90day$ (rat).

• 한국실내디자인학회논문집
• /
• 제28호
• /
• pp.117-123
• /
• 2001

In 1990s, interest on Environment has been increased and Environment-oriented consumer's economic power accelerated the trend of preference for 'Environment-friendly material'. Moreover, the concept of 'Sick Building' Syndrome has been spread to the public and solution for the syndrome is required. 'Environment-friendly material'means that the material used is not harmful for the user's health, and on top of that, causes least harm to the environment during production/scrap process of the material itself. Decision of designers and architectures, as a result, is really crucial tot he environment issues. Above all, selecting the most environment-friendly material and design among possible candidates is natural and cost saving way. In the paper, couple of Evaluation Criterium for Material Selection are analyzed and objective linkage has been identified. With the result of analysis, methodology to minimize damage on environment during whole life cycle of the Interior Design has been sought for.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.207-211
• /
• 2005

This research is aimed to study the finishing material applied in interior space for improving residential environment. First of all, it finds out what is 'Sick Building Syndrome' and 'Sick House Syndrome', how harmful to human body about indoor air pollution substance (such as volatility organic compound, formaldehyde) and investigate the effect when the environment-friendly finishing material is used. Secondly, classify and examine all kind of finishing material applied in interior space. Finally, after emphasize the importance of environment-friendly finishing material from domestic or overseas, this research suggest the basic information of environment-friendly finishing material in order to use in the future buildings.

• 한국콘텐츠학회논문지
• /
• 제18권11호
• /
• pp.540-549
• /
• 2018

본 연구는 대구 경북지역에서 근무하는 치과위생사 238명을 대상으로 자기기입식 설문을 통하여 근무유형별 치과재료에 대한 유해전달 실태를 파악하기위해 병원 유형별 유해인자 노출시간 및 근무환경특성 차이를 비교하고 물질안전보건자료(MSDS) 인지정도의 차이를 조사하였다. 연구 결과 병원 유형별 유해인자 노출시간을 비교한 결과 병원의 경우 화학물질에서 발생하는 분진유발에 노출되는 시간이 가장 길었고, 레진충전, 소독제 접촉 순으로 나타났다. 치과재료에 대한 물질안전보건자료(MSDS)를 인지하고 있는지에 대한 문항에 대하여 '인지한다'고 답한 대상자는 병원근로자는 37명(29.4%), 14명(12.5%)로 나타났으며(p<0.001), 치과재료를 사용하기 전 MSDS를 읽어본 경험이 있는 근로자는 병원근로자는 18명(14.3%), 의원근로자는 6명(5.4%)으로 조사되었다. 사용하는 치과재료의 물질안전보건자료(MSDS)를 비치한다고 응답한 대상자는 병원근로자의 경우 의원근로자에 비해 2.39배 물질안전보건자료(MSDS)를 비치하는 경우가 많았다. 이에 병원 유형별 특성에 맞게 화학물질의 건강상의 유해성에 대해 인지하고 안전보건교육을 지속적으로 실시함으로써 MSDS 정보에 대한 올바른 인식확립으로 근무환경이 개선되어져야 할 것이며, 치과재료의 제품에 사용설명서 및 MSDS 화학물질 정보제공 관리가 강화하여 전략적 접근 및 근로자의 알 권리를 보장할 수 있는 제도의 필요성을 제안한다.

• 한국의상디자인학회지
• /
• 제24권4호
• /
• pp.101-116
• /
• 2022

The purpose of this study is to understand the trends of fashion mask designs as a fashion item with characteristics to protect individual health and safety from harmful environments. To this end, the concept, the trend analysis of the domestic and foreign mask markets, the type, characteristics of functional masks, and the design trend of fashion masks were analyzed. Research methods included case studies and literaturte on mask design, fashion magazines, fashion brand websites, fashion collections, and promotional material. First, masks for personal safety were classified as protective function masks from the natural environment, functional masks by industrial groups, masks for protective functions from biohazards, and masks for protective functions from various external activities. Through this analysis, the design trends of fashion masks were analyzed. The functional orientation of structure and functionality, the environmental orientation of sustainable eco-friendly methods, the fashion orientation of individual fashion styling, and the social functional orientation tend to transmit social messages. In the harmful environment of everyday life, items such as fashion masks with functionality and fashion characteristics should be continuously studied to integrate functional and design characteristics that can contribute to the future fashion industry and the fashion market as a sense of unity and responsibility.