• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.6B
• /
• pp.630-640
• /
• 2009

The thesis suggests hand-held equipment to overhaul for mobile TFT LCD/OLED module of high-performance. The established module equipment to overhaul could distinguish outputting video data to module for distinguishing flicker, but it is impossible with low system. In this thesis, supporting system could check the various supplement functions from bringing equipment to overhaul without changing design of FPGA or H/W the module various size for equipment to overhaul for module of high-performance coincidently. The system includes hand-held equipment to overhaul, test software embedded and software a base personal computer and have designed to output, save, and certify all contents of module test of hand-held equipment to overhaul to interface universal serial bus. Setting up 9 items that represent for efficient verification of the proposed system have been possible confirmation with TFT LCD/OLED module of high-performance, establishment scan time, creation gamma, changing register, supporting interface, and multi inch modules.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.357-362
• /
• 2006

This paper describes two kinds of personal hand-held electronic devices to enhance marine leisure safety. The one is Radar response-type safety device triggering by the pulse signal from a commercial 9GHz-band Radar to provide quick search and rescue with combined civilian-government-military fleets. The other one is M-RFID (Marine Radio Frequency IDentification) based safety electronic device using 900MHz Tx/Rx with spread spectrum frequency hopping and GPS. Through the field tests at sea using Korea Coast Guard's warship the operating performances are verified. Further plan for practical use of each device was also discussed.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.6
• /
• pp.41-50
• /
• 1995

A state-of-the-arts GaAs power metal semiconductor field effect transistor (MESFET) for 3.3V operation digital hand-held phone at 900 MHz has been developed for the first time, The FET was fabricated using a low-high doped structures grown by molecular beam epitaxy (MBE). The fabricated MESFETs with a gate width of 16 mm and a gate length of 0.8 .mu.m shows a saturated drain current (Idss) of 4.2A and a transconductance (Gm) of around 1700mS at a gate bias of -2.1V, corresponding to 10% Idss. The gate-to-drain breakdown voltage is measured to be 28 V. The rf characteristics of the MESFET tested at a drain bias of 3.3 V and a frequencyof 900 MHz are the output power of 32.3 dBm, the power added efficiency of 68%, and the third-ordr intercept point of 49.5 dBm. The power MESFET developed in this work is expected to be useful as a power amplifying device for digital hand-held phone because the high linear gain can deliver a high power added efficiency in the linear operation region of output power and the high third-order intercept point can reduce the third-order inter modulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.397-398
• /
• 2011

• ETRI Journal
• /
• v.16 no.4
• /
• pp.1-11
• /
• 1995

A GaAs power metal semiconductor field effect transistor (MESFET) operating at a voltage as low as 3.3V has been developed with the best performance for digital handheld phone. The device has been fabricated on an epitaxial layer with a low-high doped structure grown by molecular beam epitaxy. The MESFET, fabricated using $0.8{\mu}m$ design rule, showed a maximum drain current density of 330 mA/mm at $V_{gs}$ =0.5V and a gate-to-drain breakdown volt-age of 28 V. The MESFET tested at a 3.3 V drain bias and a 900 MHz operation frequency displayed an output power of 32.5-dBm and a power added efficiency of 68%. The associate power gain at 20 dBm input power and the linear gain were 12.5dB and 16.5dB, respectively. Two tone testing measured at 900.00MHz and 900.03MHz showed that a third-order intercept point is 49.5 dBm. The power MESFET developed in this work is expected to be useful as a power amplifying device for digital hand-held phone because the high linear gain can deliver a high power added efficiency in the linear operation region of output power and the high third-order intercept point can reduce the third-order intermodulation.

• Journal of Information Display
• /
• v.3 no.4
• /
• pp.4-7
• /
• 2002

A recently developed phase separated composite film method has been employed to fabricate a liquid crystal (LC) based electro-optical device using a single glass substrate. The resulting device is made of adjacent parallel layers of LC and polymer maded by phase separation. The LC layer is confined between the solidified polymer layer on one side and the glass substrate on the other. The electro-optical properties of these devices demonstrate their technological potential in light weight and hand-held electronic products.

• Journal of the Korean Professional Engineers Association
• /
• v.38 no.3
• /
• pp.6-12
• /
• 2005

DMB(Digital Multimedia Broadcasting) Service was started, DMB enables people on the move to enjoy seamless video streaming, theater-quality audio and data through a hand-held digital device much like a handset or an in-car terminal. Realization of any-time, any-where, any-device, any-one DMB Service is needed for the government effective policy, Technical R&D and Standization, Corporate investment.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.2
• /
• pp.73-83
• /
• 2014

Thanks to the development of diverse audio editing Technology, audio file can be easily revised. As a result, diverse social problems like forgery may be caused. Digital forensic technology is actively studied to solve these problems. In this paper, a hand-held device identification method, an area of digital forensic technology is proposed. It uses the noise features of devices caused by the design and the integrated circuit of each device but cannot be identified by the audience. Wiener filter is used to get the noise sounds of devices and their acoustic features are extracted via MIRtoolbox and then they are trained by multi-layer neural network. To evaluate the proposed method, we use 5-fold cross-validation for the recorded data collected from 6 mobile devices. The experiments show the performance 99.9%. We also perform some experiments to observe the noise features of mobile devices are still useful after the data are uploaded to UCC. The experiments show the performance of 99.8% for UCC data.

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.2
• /
• pp.91-96
• /
• 2015

We propose AirPincher, a handheld pointing device for recognizing delicate mid-air hand gestures to control a remote display. AirPincher is designed to overcome disadvantages of the two kinds of existing hand gesture-aware techniques such as glove-based and vision-based. The glove-based techniques cause cumbersomeness of wearing gloves every time and the vision-based techniques incur performance dependence on distance between a user and a remote display. AirPincher allows a user to hold the device in one hand and to generate several delicate finger gestures. The gestures are captured by several sensors proximately embedded into AirPincher. These features help AirPincher avoid the aforementioned disadvantages of the existing techniques. We experimentally find an efficient size of the virtual input space and evaluate two types of pointing interfaces with AirPincher for a remote display. Our experiments suggest appropriate configurations to use the proposed device.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.297-302
• /
• 2009

In this paper, we propose advanced screen detector as a tool for selecting the object for tracking and estimating its distance from a screen using fuzzy logic in vision based pointing device. Our system classifies the line component of the input image into horizontal and vertical lines and applies the fuzzy rule to obtain the best line pair which constitute peripheral framework of the screen. The proposed system improves the detection ratio for detecting the screen in relative to the detector used in the previous works for hand-held type vision based pointing device. Also it allows to detect the screen even though a small part of it may be hidden behind other object.