• 건축역사연구
• /
• 제14권1호
• /
• pp.71-87
• /
• 2005

4 royal palaces are currently remained from capital city (Seoul) of 'Cho-Sun(朝鮮)' period. In these palaces, 'Main hall of Royal Palace(正殿)' is the center of the Royal Palaces. The 'Main hall of Royal Palace' of the Royal Palace was the best building of that time. Therefore there were many studies about the 'Main hall of Royal Palace'. But these studies were individual studies of these 'Main hall of Royal Palace'. Therefore, this study is to analyze and compare 4 'Main hall of Royal Palace' of the Royal palaces. It is to study the proportion regarding the Diameter of the pillar, the Height, the pillar and pillar Interval's Distance, and the arrangement of 'Kong-Po(bracket sets)'. With these studies, it is to prove that the 'Main hall of Royal Palace' is the building which high construction technique of this time is expressed. Result of this study is as followings; First, the proportion of pillar height(H) to its diameter(D) average from H=8.0 to 8.5D. Only the Myeong-Jeong-Jeon omitted the 'Go-Ju(高柱)' in the 'Toi-Kan (退間)' to place Ea-Jwa(御座). Second, Second, the proportion of diameter of the pillar of 'Eoi-Bu-Pyeong-Ju(外部平柱)' and 'Nae-Jin-Go-Ju(內陣高柱)' average D1(Diameter of 'Eoi-Bu-Pyeong-Ju') =0.91D2 (Diameter of 'Nae-Jin-Go-Ju'). In regards to the height, the single floor 'Main hall of Royal Palace' and double floor 'Main hall of Royal Palace' seems to be different. The height proportion of the double floor 'Main hall of royal palace' is H1(Height of 'Eoi-Bu-Pyeong-Ju')=0.34H2(Height of 'Nae-Jin-Go-Ju') and single floor 'Main hall of Royal Palace' has a proportion of H1=0.62H2. Third, in Geun-Jeong-Jeon, with the proportion of height and diameter of the pillar, interval's distance between pillars and diameter, the pillar interval distance and height, of 'Ea-kan(御間)' from the 'Toi-Kan' is different from 'Main hall of Royal Palace'. This is because the structure of 'Toi-Kan' of Geun-Jeong-Jeon is not stable. In order to reinforce this, 'Gui-Go-Ju(隅高柱)' of the Geun-Jeong-Jeon jut out $4{\sim}7%$ more compared to In-Jeong-Jeon. Fourth, when comparing double floor 'Main hall of royal palace' of Geun-Jeong-Jeon and In-Jeong-Jeon, based on distance of 'Eoi-Bu-Pyeong-Ju' and 'Nae-Jin-Go-Ju' of lower level, the 'Sang-Bu-Pyeong-Ju(上部平柱)' of Geun-Jeong-Jeon jut out $4{\sim}7%$ more compared to the In-Jeong-Jeon and also It becomes thicker. Fifth, the arrangement of 'Kong-Po' on the front row of 'Gan(間)' had to do with the change of side 'Gan'. Even though the Geun-Jeong-Jeon and the In-Jeong-Jeon were double floors, the arrangement of the 'Kong-Po' is different because the number of side bay is different.

• 센서학회지
• /
• 제8권4호
• /
• pp.308-313
• /
• 1999

본 논문에서는 TMAH를 이용한 비등방성 에칭기술을 이용하여 3차원의 자장의 값을 측정하기 위한 경사각 구조의 3차원 자기센서를 제작하였다. 제작된 3차원 자기센서는 비등방성 식각에 의하여 [100] 결정방향의 Si 표면에 [111] 결정방향의 경사면을 구성하여 이 경사면에 경사각 Hall 소자를 제작하였으며, 기존의 3차원 자기센서에 비하여 개선된 감도 특성을 나타내었다. 제작된 소자의 적감도는 547V/AT 이었으며 자기센서 출력의 PSD 성분의 측정에 의해 계산 되어진 최소측정 자장은 0.07G 이었다.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.71-77
• /
• 2021

An impeller identification technique that is essential for adding viscosity measurement functions to overhead stirrers is presented in this study. Previous studies have revealed that using magnets facing the same poles arranged in a row can aid in distinguishing the types of impellers by detecting the number of magnets in a non-contact manner. However, as these previous studies measured the magnetic fields using analog Hall sensors, a converting circuit for the digital signals is required that can interface with the MCU. In this study, it was demonstrated that the number of magnets can be distinguished without using a separate conversion circuit by using a Hall sensor with a digital output. Owing to the unique hysteresis characteristics of digital Hall sensors, it was confirmed through experiments that the complex and diverse outputs appear depending on the direction of the magnetic field, the arrangement of magnetic poles, and the moving direction of the magnet. The measurement of the magnetic field showed that an edge signal equal to the number of magnets inserted into the impeller was detected when the radial direction was used, and the south pole was first approached.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권3호
• /
• pp.1-4
• /
• 2008

For the effective evaluation of superconducting properties of a coated conductor, with a long length, a non destructive characterization technique including a reel-to-reel (R2R) Hall measuring system have been developed. A non-contact R2R Hall sensor array system was particularly designed to measure the superconducting property of coated conductors. The superconducting properties of long length coated conductors were measured by using this device. It was demonstrated that this system was convenient to measure the intensity and distribution of the magnet field applied perpendicular to the surfaces of the coated conductors. Using this device, the defect and low critical current density(Jc) area of coated conductors could be detected in real-time measurement.

• 건축역사연구
• /
• 제32권3호
• /
• pp.77-88
• /
• 2023

In the late Joseon Dynasty, the floor of the royal palace was covered with grass mat called ji-ui. Ji-ui was produced by connecting several mats named seokja(席子) and trimming the edge with narrow fabric named seon(縇). The standard manufacturing technique was to connect the shorter sides of the seokjas by overstitching them. A room was covered with either single or multiple ji-uis, depending on the case. In the case of the main and the subsidiary halls (jeong-jeon and pyeon-jeon, respectively) where the king conducted official meetings with the civil servants, multiple ji-uis were laid out to signify the division of space, which reflected the ceremonial aspects of the governing acts. The most essential division was the distinction of yeong-wae(楹外) and yeong-nae(楹內), with the jeon-goju (a tall frontal pillar inside the hall) functioning as the breakpoint. Jeong-jeon was divided into four spaces each covered with one ji-ui: yeong-nae, yeong-wae, and the left and the right sides of the royal seat named jwa-tap(座榻). Pyeon-jeon was covered with three ji-uis that divided the hall into three spaces: yeong-nae, yeong-wae, and hu-twae(後退) (the hind section) where the royal seat was placed on.

• Progress in Superconductivity
• /
• 제13권1호
• /
• pp.34-39
• /
• 2011

본 연구를 통해서 초전도 선재 시료의 국소적인 영역에 대한 전류 밀도의 공간적인 분포를 시료의 손상 없는 비파괴적인 방법으로 LTSHPM을 통해서 1차원 2차원으로 형상화해 보았다. 그 결과 외부자기장에 의한 차폐전류의 흐름을 분석할 수 있었다. 또한 MPMS에서 외부자기장에 따른 자기모멘트를 측정한 결과와 LTSHPM을 통해 전류 밀도 분포를 분석한 결과를 비교해 볼 때 외부자기장에 의한 반자성의 크기와 자기모멘트로 인해 생기는 차폐전류가 100 Oe에서 최댓값을 가지는 일치하는 결과를 얻을 수 있었다. 그리고 세 가지의 평행한 브릿지에 흐르는 차폐전류를 2차원적으로 분석해 본 결과 시료 전체적으로 가장 바깥쪽으로 차폐전류가 흐르는 공통점을 확인해 볼 수 있었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.13-15
• /
• 2007

We employed home-made position marking module in the scanning Hall probe system. The module is composed of two coils of which gap, a, between wires in a coil is $500{\mu}m$. We appiled 10-35mA of current with 15Hz in the coils and recorded ac corresponding magnetic field signal with respect to measuring time while we measured DC field profiles produced due to superconducting film in a perpendicular magnetic field. We calibrate the position, x, of coils using the measuring time and location of the coils in the holder. The error range was about ${\pm}0.1mm$. We test the module as we applied current of 100A and filed of 1kG in the superconducting tape. It was confirmed that there was no interference between superconducting tape and marking coils.

• 연구논문집
• /
• 통권30호
• /
• pp.159-168
• /
• 2000

In this research, MFL inspection system has been studied for the inspection of storage tank floor. The reference specimens having 20%, 40%, 60% and 80% slot's are fabricated using the carbon steel plates of a 6mm and 10mm thick. Powerful permanent magnets and Hall effect sensors are used to this application. Also, this paper presents a newly developed MFL scanning system. Conclusively, it is shown that our system is able to detect metal loss like a slot.

• 대한전자공학회논문지
• /
• 제26권12호
• /
• pp.2010-2015
• /
• 1989

A SOI was fabricated by the FIPOS technique using n/p+/p silicon structure. Fabricated silicon island which has 3\ulcorner thickness and 100\ulcorner width was investigated by measuring van der Pauw resistivity, Hall mobility, dielectric breakdown voltage and leakage current. Hall mobility of the SOI was measured to be 300-500cm\ulcornerV.sec and its breakdown field was 1-2 MV/cm. The cross-sectional geometries of the SOI island were examined by SEM and optical microscope.

• The Korean Journal of Ceramics
• /
• 제6권4호
• /
• pp.390-395
• /
• 2000

Silicon, titanium, zirconium phosphates were synthesized by starting with appropriate chemical precursors in a solution. The synthetic procedure, chemical and physical structures were examined by FT-IR, liquid and solid state NMR, TGA, SEM, XRD, etc. The phosphates were examined for thermal and electrical properties. Advantages of the synthesis technique and the data on unique structures and thermal properties are reported.