• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.85-89
• /
• 1998

A switching power stage is a very nonlinear system because it has two or more operation modes in one switching cycle. To model a switching power stage, the state space averaging method has been developed. Though it allows a unified treatment of a large variety of switching power stages, the model it yields is always very nonlinear. So, it is required to linearize the averaged model. But it is well known that a controller for a nonlinear plant designed by the linearization frequently fails in showing satisfactory control performance. Hence it is very natural to try to design a nonlinear controller for a switching power stage. In design of a switching power system, nonlinear control approaches such as adaptive control and fuzzy control have been widely studied so far. In this research, a recently developed control method, time delay control is briefly studied and a design example for a ZVS PWM half bridge converter is given. The performance of the time delay controller is compared to its conventional counterpart, PI controller by computer simulations.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.3
• /
• pp.64-69
• /
• 2000

This paper proposes a novel fractal coding method for fast encoding and high compression to shorten time to take on fractal encoding by using limited search area. First. the original image is contracted respectively by half and by quarter with the scaling method and bit-plane method. And then, the corresponding domain block of the quarter-sized image which is most similar with one range block of the half-sized image is searched within the limited area in order to reduce the encoding time extremely. As the result of the evaluation, the proposed algorithm provided much shorter encoding time and better compression ratio with a little degradation of the decoded image qualify than Jacquin's method.

• Journal of The Korean Association of Information Education
• /
• v.25 no.5
• /
• pp.813-824
• /
• 2021

To improve educational performance by analyzing the learning trends of adult learners of Open High Schools, various algorithm models using artificial intelligence were designed and performance was evaluated by applying them to real data. We analyzed Log data of 115 adult learners in the cyber education system of Open High Schools. Most adult learners of Open High Schools learned more than recommended learning time, but at the end of the semester, the actual learning time was significantly reduced compared to the recommended learning time. In the second half of learning, the participation rate of VODs, formation assessments, and learning activities also decreased. Therefore, in order to improve educational performance, learning time should be supported to continue in the second half. In the latter half, we developed an artificial intelligence algorithm models using Tensorflow to predict learning time by data they started taking the course. As a result, when using CNN(Convolutional Neural Network) model to predict single or multiple outputs, the mean-absolute-error is lowest compared to other models.

• Journal of the Korean Arthroscopy Society
• /
• v.8 no.1
• /
• pp.37-44
• /
• 2004

Purpose: To evaluate the optimal number of additional half hitches for achieving an optimal knot-holding capacity (KHC) of Lockable sliding knots. Methods: Four configurations of arthroscopic knots (Duncan loop, Field knot, Giant knot, and SMC knot) were tested for their knot-holding capacity. For each knot configuration, 6 sequential knots were made including the initial sliding knot and additional 5 knots by incrementing one half hitches at a time. Each added half-hitch were in reversing half-hitches with alternate posts (RHAPs) fashion. For each sequential knot configuration, 12 knots were made by No. 2 braided sutures. On the servo-hydraulic material testing system (Instron 8511, MTS, Minneapolis, MN), cyclic loading, load to clinical failure (3-mm displacement), load to ultimate failure, and mode of failure were measured. Results: Most of the initial loop without additional half-hitch showed dynamic failure with cyclic loading. The mean displacement after the end of cyclic loading decreased with each additional half-hitches. SMC and Giant knot reached plateau to 0.1 mm or less displacement after one additional half-hitch, shereas Field and Duncan loop needed 3 additional half-hitches. The SMC and Duncan knots needed 1 additional half-hitch to reach greater than 80N at clinical failure, whefeas the other 2 knots needed2 additional half-hitches. For the load exceeding 100N for clinical failure, the SMC knot required 3 additional half-hitches and the other three knots needed 4 additional half-hitches. As the number of additional half-hitches incremented, the mode of failure switched from pure loop failure (slippage) to material failure (breakage). Duncan loop showed poor loop security in that even with 5 additional half-hitches, some failed by slippage (17%). On the other hand, after 3 additional half-hitches, the 3 other knots showed greater than 75% of failure by material breakage mode (SMC and Field 92%, Giant 75%). Conclusion: Even with its own locking mechanism, lockable sliding knot alone does not withstand the initial dynamic cyclic load. For all tested variables, SMC knot requires a minimum of 2 additional half-hitches. Duncan knot may need more than 3 additional half-hitches for optimal security. All knots showed a mear plateau in knot security with 3 or more additional half-hitches.

• Journal of Food Hygiene and Safety
• /
• v.23 no.2
• /
• pp.129-136
• /
• 2008

Three benzimidazole pesticides commonly used in korean lettuce were subjected to a field residue trial to ensure safety of terminal residue in the harvest. The residual patterns of three benzimidazole pesticides, which were carbendazim, benomyl and thiophanate-methyl were examined after applying with the recommended dose in two types of korean lettuce (Chima and Chuckmeon) and their DT50 were calculated. In Chima lettuce, biological half-lives of carbendazim, benomyl and thiophanate-methyl were 2.56, 1.37 and 2.54 days, respectively and their required time under MRL(5.0 mg/kg as carbendazim) were 4.5, 2.2 and 1.0days. In Chuckmeon lettuce, biological half-lives of them were 3.41, 1.70 and 4.20 days, respectively and their required time under MRL were 5.4, 1.9 and 0.5days.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.6 s.177
• /
• pp.1557-1564
• /
• 2000

When the half infinite crack in the orthotropic material strip with a large anisotropic ratio(E11>>E22) propagates with constant velocity, dynamic stress component $\sigma$y occurre d along the $\chi$ axis is derived by using the Fourier transformation and Wiener-Hopf technique, and the dynamic stress intensity factor is derived. The dynamic stress intensity factor depends on a crack velocity, mechanical properties and specimen hight. The normalized dynamic stress intensity factors approach the maximum values when normalized time(=Cs/a) is about 2. They have the constant values when the normalized time is greater than or equal to about 2, and decrease with increasing a/h(h: specimen hight, a: crack length) and the normalized crack propagation velocity( = c/Cs, Cs: shear wave velocity, c: crack propagation velocity).

• The Korean Journal of Community Living Science
• /
• v.18 no.3
• /
• pp.433-444
• /
• 2007

Today the number of the disabled people with a spinal cord injury is increasing by the acquired factor. The purpose of the study is to furnish basic data for the study of satisfactory clothing construction data by considering the physical variation by the time passed the since the injury. Also the study includes the actual measuring of the disabled men with spinal cord injuries which is compared with the data of the 5th national anthropometric survey of Korea and makes it possible to grasp the distinguished physical feature of the disabled men with the spinal cord injury. As a result, first, the measured data are smaller than those of the 5th national anthropometric survey of Korea in the items of height and length of the upper half of the body related to stature. Second, the measured data are bigger than those of the 5th national anthropometric survey of Korea in the items of breadth, depth and circumference of the upper half of the body related to the exercise. Third, there are differences in the items of depth of the lower half of the body, breadth and circumference in the analysis of the time passed since the injury.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.5
• /
• pp.447-453
• /
• 2016

In this study, we intended to extend the life of electropolishing solution through the reduction of electric resistance by improving the electrolysis efficiency. The optimum conditions were obtained by half round bus bar and Taguchi method. As the main control factors in the electropolishing process, current density, polishing time, electrolyte temperature and flow rate were selected. The electrolyte temperature was the most significant to the electrolysis efficiency. The optimum conditions for the life extension of electropolishing solution were as follows: current density, $45A/dm^2$; polishing time, 6 min; electrolyte temperature, $70^{\circ}C$; flow rate, 11 L/min. As a results of ANOVA of SN ratios, it was found that the electrolyte temperature was significant factor at the 90% confidence level.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.3
• /
• pp.1311-1324
• /
• 2019

In the traditional cellular network communication, the cellular user and the base station exchange information through the uplink channel and downlink channel. Meanwhile, device-to-device (D2D) users access the cellular network by reusing the channel resources of the cellular users. However, when cellular user channel conditions are poor, not only D2D user cannot reuse its channel resources to access the network, but also cellular user's communication needs cannot be met. To solve this problem, we introduced a novelty D2D communication mechanism in the downlink, which D2D transmitter users as half-duplex (HD) relays to assist the downlink transmission of cellular users with reusing corresponding spectrum. The optimization goal of the system is to make the cellular users in the bad channel state meet the minimum transmission rate requirement and at the same time maximize the throughput of the D2D users. In addition, i for the purpose of improving the efficiency of relay transmission, we use two-antenna architecture of D2D relay to enable receive and transmit signals at the same time. Then we optimized power of base station and D2D relay separately with consideration of backhaul interference caused by two-antenna architectures. The simulation results show that the proposed HD relay strategyis superior to existing HD and full-duplex (FD) models in the aspects of system throughput and power efficiency.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.454-462
• /
• 2019

When compared to traditional bridge-type inverters, the dual-buck inverter has a higher reliability due to the fact that its bridge legs do not have a shoot-through problem. In this paper, the working principle of the dual-buck inverter is analyzed. A comparison of the working modes under full-cycle and half-cycle control is discussed. With half-cycle control, the inverter can realize a higher efficiency. However, this results in current zero-crossing distortion. The corresponding control strategy of the dual-buck inverter is proposed in order to realize both high efficiency and low current harmonic distortion. In addition, the system stability is analyzed. Dead-time is unnecessary due to the advantages of the topology. Thus, the current harmonic distortion can be further reduced. An inverter with the proposed control strategy has the advantages of high reliability, high efficiency and low current harmonic distortion. Finally, simulation and experimental results are given to verify the theoretical analysis.