• Journal of Microbiology and Biotechnology
• /
• 제22권8호
• /
• pp.1155-1160
• /
• 2012

Sulfur-utilizing autotrophic denitrification relies on an inorganic carbon source to reduce the nitrate by producing sulfuric acid as an end product and can be used for the treatment of wastewaters containing high levels of nitrates. In this study, sulfur-denitrifying bacteria were used in anoxic batch tests with sulfur as the electron donor and nitrate as the electron acceptor. Various medium components were tested under different conditions. Sulfur denitrification can drop the medium pH by producing acid, thus stopping the process half way. To control this mechanism, a 2:1 ratio of sulfur to oyster shell powder was used. Oyster shell powder addition to a sulfur-denitrifying reactor completely removed the nitrate. Using 50, 100, and 200 g of sulfur particles, reaction rate constants of 5.33, 6.29, and $7.96mg^{1/2}/l^{1/2}{\cdot}h$ were obtained, respectively; and using 200 g of sulfur particles showed the highest nitrate removal rates. For different sulfur particle sizes ranging from small (0.85-2.0 mm), medium (2.0-4.0 mm), and large (4.0-4.75 mm), reaction rate constants of 31.56, 10.88, and $6.23mg^{1/2}/l^{1/2}{\cdot}h$ were calculated. The fastest nitrate removal rate was observed for the smallest particle size. Addition of chemical oxygen demand (COD), methanol as the external carbon source, with the autotrophic denitrification in sufficiently alkaline conditions, created a balance between heterotrophic denitrification (which raises the pH) and sulfur-utilizing autotrophic denitrification, which lowers the pH.

• 한국분말재료학회지
• /
• 제24권1호
• /
• pp.6-10
• /
• 2017

This study investigates the main growth mechanism of InP during InP/ZnS reaction of quantum dots (QDs). The size of the InP core, considering a synthesis time of 1-30 min, increased from the initial 2.56 nm to 3.97 nm. As a result of applying the proposed particle growth model, the migration mechanism, with time index 7, was found to be the main reaction. In addition, after the removal of unreacted In and P precursors from bath, further InP growth (of up to 4.19 nm (5%)), was observed when ZnS was added. The full width at half maximum (FWHM) of the synthesized InP/ZnS quantum dots was found to be relatively uniform, measuring about 59 nm. However, kinetic growth mechanism provides limited information for InP / ZnS core shell QDs, because the surface state of InP changes with reaction time. Further study is necessary, in order to clearly determine the kinetic growth mechanism of InP / ZnS core shell QDs.

• 한국지구과학회:학술대회논문집
• /
• 한국지구과학회 2010년도 춘계학술발표회 논문집
• /
• pp.121-121
• /
• 2010

행성상 성운 NGC 7009와 NGC 7027의 모델을 연구하기 위해 1998년 8월 14일부터 16일 까지 3일간의 Keck I HIRES의 분광 관측 자료를 이용하였다. 사용한 파장 영역은 $3250{\AA}{\sim}8725{\AA}$이고, H I, He I, He II, C II, C III, N II, N III, [N II], [O I], [O II], [O III], [S II], [S III], [Cl III], [Cl IV], [Ar III], [Ne III] 등의 방출선을 얻었다. 본 연구에서는 이러한 방출선의 선윤곽(line profile)을 IRAF와 StarLink/Dipso를 이용해 분석하여 성분을 구하였는데 H I, He I, He II, [O III], [C III], [N II] 등 대부분은 2개로 분리되었고, [S II], [Ar III]의 경우에는 3개로 분리되었다. 후자의 경우 구각(shell)의 단순한 팽창뿐만 아니라 다른 제3의 방향으로 팽창하고 있는 성분이 존재함을 의미한다. 비교적 S/N가 양호한 선들의 FWHM(Full Width at Half Maximum)을 측정하여 팽창속도를 구한 후 이 선들이 생성에 기여한 지역의 온도 또는 이온화 에너지 (IP)에 대한 팽창속도의 변화를 조사하였다. 또한 두 행성상 성운의 물리적 특성과 화학 원소 함량을 결정하기위해 광이온 모델 Tlusty Code와 CLOUDY를 사용하여 NGC 7009의 선행연구 Hyung & Aller(1995), Kwitter & Henry(1998)와 비교하였고, NGC 7027은 Zhang & Liu(2005), Middlemass(1990)와 비교하였다. NGC 7009과 NGC 7027의 수소 밀도($N_H$)를 $8,000cm^{-3}$으로 가정했을 때, NGC 7009의 중심별의 온도는 77,000K이고, 구각(shell)의 크기는 0.031~0.044pc이며 장축에 대해서만 결과를 나타내었다. NGC 7027의 경우, 중심별의 온도는 180,000K이고, 구각(shell)의 크기는 0.015~0.02pc으로 판단된다.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 1978년도 학술대회지
• /
• pp.67-74
• /
• 1978

The phenomenon of 'soil sickness' is one of the most important limiting factors for ginseng(Panax ginseng) production in Korea. The principal cause is known to be due to the root rots caused by Cylindrocarpon destructans and Fusarium solani. Attempts were made to control the root rots with non-polluting cultural methods or soil amendments. Among the nine soil amendments tested, crab shell, cow bone and pig feces were selected for further testing. Each of the three amendments increased the populations or various actinomycetes in the range of 10-25 times over that of non-amended soil, whereas the population of C. destructans was reduced to about $50-70\%$ as compared with the control. Five isolates of Streptomyces with clear zones on chitin-agar medium were selected and then tested for their antagonistic effects on C. destructans. When anyone of the five isolates of Streptomyces and C. destructans was grown together in a modified peptone broth, growth of the latter was highly inhibited. When three levels of crab shell, cow bone, or pig feces were used to amend potted soil infested with C. destruetans, the root rot ratings of ginseng seedlings were reduced to less than one half in all the treatments as compared to the control. In another similar experiment, crab shell and cow bone amendments resulted in almost complete control of the seedling root rots in soil infested with C. destructans or F. solani. In conclusion, biological control with soil amendments of ginseng root rots caused by C. destructans and F. solani was successful. Further basic studies should be pursued using soil amendments for better control. In addition, field experiments are needed to complement the soil amendment control measures in an integrated pest control program.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2136-2146
• /
• 2006

A study on a creep-fatigue crack growth behavior has been carried out for a cylindrical structure with weldments by using a structural test and an evaluation according to the assessment procedures. The creep-fatigue crack growth behavior following the creep-fatigue crack initiation has been assessed by using the French A16 procedure and the conservatism for the present structural test has been examined. The structural specimen is a welded cylindrical shell made of 316 L stainless steel (SS) for one half of the cylinder and 304 SS for the other half. In the creep-fatigue test, the hold time under a tensile load which produces the primary nominal stress of 45 MPa was one hour at $600^{\circ}C$ and creep-fatigue loads of 600 cycles were applied. The evaluation results for the creep-fatigue crack propagation were compared with those of the observed images from the structural test. The assessment results for the creep-fatigue crack behavior according to the French Al6 procedure showed that the Al6 is overly conservative for the creep-fatigue crack propagation in the present case with a short hold time of one hour.

• 대한가정학회지
• /
• 제20권3호
• /
• pp.35-43
• /
• 1982

The purpose of this survey was to investigate the nutrient and food intake and haematology of the latter half of pregnant women in Nam Hae Do. The nutrient intake study was performed by Twenty-four hour dietary recall method. As Haematology, RBC, Hb. and Hct were measured. 1. The results of nutritional survey were, 1) The mean nutrient intakes that were below the RDA were Protein, Calorie, Calcium and Iron. 2) The mean nutrient intakes that were above the RDA were Vitamin A, Thiamin, Riboflavin, Ascorbic acid. 3) Most of calorie and other nutrients were obtained from vegetable food sources. 4) Animal protein intake was 33% of total protein intake and most of this value was obtained from fish and shell fishes. 2. The extent of malnutrition was explained in terms of the amount of calorie, protein, calcium and iron. The results were, The predicted percentage of deficiency, in case of Calorie, 53.3% of total subjects. in case of Protein, 52% of total subjects. in case of Calcium, 78.7% of total subjects. in case of Iron, 54.7% of total subjects. 3. The results of Haematology were, 1) The mean level of RBC, Hb and Hct were 3.76$\times$106cm/㎣, 10.47gm%, and 32.56% 2) There were significant correlation between calorie intake and Hct level, protein intake and RBC level, Iron intake and MCHC level.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1994년도 제6회 학술발표회 논문개요집
• /
• pp.50-50
• /
• 1994

Half-metallic Heusler alloys (NiMnSb, ppdMnSb, pptMnSb) have attracted much attention due to their unique electronic and magnetic structures. Sppin-ppolarized band structure calculation ppredicts metallic behavior for the majority sppin states and semiconductor behavior for the minority sppin states. We have studied the electronic structures of these half-metallic Heusler alloys by core-level pphotoemission sppectroscoppy of Mn 2pp and 3s XppS sppectra. We found large intensities of Mn 2pp satellites and 3s exchange spplitting comppared with other metal Mn-alloys. These satellite structure can be understood by applying Anderson imppurity model. This fact supports the calculated sppin pprojected ppartial density of states which suggests that the valence electrons be highly sppin ppolarized near Fermi level and that the electrons involved with charge-transfer be mainly minority sppin ones which have semiconducting band structure. The trend of charge transfer energies Δ from ligands (Sb 5pp) to Mn 3d, obtained from our model fitting, is consistent with that calculated from sppin pprojected ppartial density of state. Also the trend of d-d electron correlation energies U calculated from Mn Auger line L3 VV by Mg $K\alpha$ source is comppatible with that resulted from our model fitting. We fitted the Mn 3s curve in the same way as for insulating Mn comppounds by using the same pparameters calculated from Mn 2pp curve fitting exceppt for the Coulomb interaction energy Q between core hole and d-electrons. The 3s sppectra were analyzed by combing the charge transfer model and a simpple model taking into account the configuration mixing effect due to the intra-shell correlation. We found that the exchange interaction between 3s hole and 3d electrons is mainly respponsible for the satellite of Mn 3s sppectra. This is consistent with the neutron scattering data, which suggests local 3d magnetic moment. We find that the XppS analysis results of Mn 2pp and 3s satellite structures of half-metallic Heusler alloys are very similar to those of insulating transition metal comppounds.

• Steel and Composite Structures
• /
• 제7권4호
• /
• pp.339-354
• /
• 2007

Arched Corrugated Steel Roof (ACSR) is a kind of thin-walled steel shell, composing of arched panels with transverse small corrugations. Four full-scale W666 ACSR samples with 18m and 30m span were tested under full and half span static vertical uniform loads. Displacement, bearing capacities and failure modes of the four samples were measured. The web and bottom flange in ACSR with transverse small corrugations are simplified to anisotropic curved plates, and the equivalent tensile modulus, shear modulus and Poisson's ratio of 18m span ACSR were measured. Two 18 m-span W666 ACSR samples were analyzed with the Finite Element Analysis program ABAQUS. Base on the tests, the limit bearing capacity of ACSR is low, and for half span loading, it is 74-75% compared with the full span loading. When the testing load approached to the limit value, the bottom flange at the sample's bulge place locally buckled first, and then the whole arched roof collapsed suddenly. If the vertical loads apply along the full span, the deformation shape is symmetric, but the overall failure mode is asymmetric. For half span vertical loading, the deformation shape and the overall failure mode of the structure are asymmetric. The ACSR displacement under the vertical loads is large and the structural stiffness is low. There is a little difference between the FEM analysis results and testing data, showing the simplify method of small corrugations in ACSR and the building techniques of FEM models are rational and useful.

• 한국수산과학회지
• /
• 제19권2호
• /
• pp.109-117
• /
• 1986

피조개를 보다 효율적으로 이용하기 위해 상온유통이 가능하며 즉석식품으로 이용할 수 있는 레토르트파우치 조미피조개제품을 제조하기 위한 가공조건 및 저장 중의 품질안정성에 대하여 실험하였다. 동결한 피조개족육(足肉)을 해동한 다음 원료에 대해 솔비톨 $10.0\%$, 식염 $2.0\%$, 글루탐산나트륨 $0.5\%$로 된 혼합조미료를 살포, 혼합하여 $5^{\circ}C$, 10시간 조미한 다음 $45^{\circ}C$, 4시간 건조하였다. 건조 후 조미제품의 품질향상을 위해 $1\%$ 알긴산소오다용액에서 침지, 피복처리하여 이것을 2시간 동안 냉풍건조시킨 후 적층플라스틱필름주머니(polyester/casted polypropylene= $12{\mu}m/70{\mu}m,\;15{\times}16cm$)에 $45{\sim}50g$씩 충전, 진공포장하여 열수순환식 레토르트에서 Fo 값 6.0이 되도록 $121^{\circ}C$, 10분간 가열살균하는 것이 가장 좋았다. 이 조건하에서 제조된 제품은 가온검사결과 미생물의 증식은 없었으며 제품의 외관도 이상이 없었다. 원료피조개 및 레토르트파우치 조미피조개제품의 주요구성지방산은 16:0, 20:5, 22:6, 18:0 및 18:3이었고, 유리아미노산 중 함량이 많은 아미노산은 lysine, arginine, glycine, alanine, glutamic acid 및 leucine이었다. 그리고 핵산관련물질로서는 원료피조개 및 제품에 있어서 AMP의 함량이 가장 많았으며 유리아미노산, 베타인, 핵산관련물질 등이 원로피조개 및 제품 엑스분의 주성분을 이루고 있었다. 건조, 살균 등의 제품 제조공정을 통해 20:5 및 22:6 등 불포화산의 조성비는 다소 감소하는 반면, 포화산은 약간 증가하는 경향을 나타내었고 전엑스분질소의 함량은 약 1/2 정도 감소하였다. 제품을 상온에 100일간 저장하여 두고 품질안정성을 검토한 결과 저장 100일째까지 품질의 저하는 거의 없었으며, 알긴산소오다용액으로 피복처리를 함으로서 제품의 품질을 향상시킬 수 있다는 결론을 얻었다.

• 연구논문집
• /
• 통권26호
• /
• pp.15-24
• /
• 1996

In this study, we performed the static analysis of a cord-reinforced rubber airspring and generated the three-dimensional half-symmetry model which use the finite-strain shell elements to model the airbag. the three-dimensional hydrostatic fluid elements to model the air-filled cavity, and the rebar elements to model the multi-ply nylon reinforcement of airbag. In addition, a three-dimensional rigid surface is used to define the contact between the airspring and metal bead. The air inside the airspring cavity has been modeled as a compressible fluid satisfying the ideal gas law. The conclusions of this study are as follows. 1) In the pressurization step of analysis, we could predict the change of vertical reaction force, cavity volume and pressure within the airspring. 2) In the second step of analyzing vertical static stiffness, the increase of the vertical load increases the vertical stiffness. 3) In case of changing the angle of nylon cord, the increase the angle of nylon cord increases the vertical stiffness.