• 생명과학회지
• /
• 제20권5호
• /
• pp.717-722
• /
• 2010

가축의 안전한 축산물 생산을 위하여 2004년에서 2007년 상반기까지 국내에서 생산된 배합사료 중 소사료, 돼지사료 및 닭사료의 유해중금속(납, 크롬, 카드뮴, 비소, 셀레늄 및 수은) 및 양돈사료의 구리, 아연, 인 함량을 분석하여 사료의 안전성을 평가하였다. 연도별 배합사료 중 유해중금속을 분석한 결과 카드뮴을 제외한 다른 유해성분은 허용기준보다 매우 낮은 수치를 보였다. 카드뮴은 2005년도 돼지사료 총 987점 중 1점, 2006년도 돼지사료와 닭사료 1,239점과 778점 중 각각 4점과 1점이 허용기준을 초과하였다. 양돈용 배합사료중의 구리, 아연 및 인을 분석하여 양돈사양에 필요한 요구량과 비교하였다. 구리함량을 분석한 결과 육성돈 후기용, 비육돈 및 종돈용 배합사료에 있어서 그 허용기준을 초과하여 검출되는 평균비율은 각각 0.97%와 9.9%로 나타났다. 양돈용 배합사료 내 구리 함량(자돈용 80.98 ppm, 육성돈용 44.82 ppm, 비육돈 및 종돈용 19 ppm)은 양돈사양에 필요한 요구량, 3.5-6.0 ppm보다 훨씬 높은 수준으로 급여하고 있었다. 또 자돈용, 육성돈용 그리고 비육돈 및 종돈용에 있어서 아연 허용기준을 초과하여 검출되는 평균비율은 각각 5.7%, 7.7%, 그리고 9.3%로 나타났다. 양돈사료의 평균 인 함량은 0.74%로 검출되어 사료내의 인 요구량과 비슷하였다.

• 대한금속재료학회지
• /
• 제56권12호
• /
• pp.861-869
• /
• 2018

To determine the origin of the inhomogeneous microstructure and texture observed in drawn and annealed high purity copper wires, two kinds of drawing process conditions and their influence was investigated. The regular condition, based on a symmetric die, and a condition designed intentionally to produce an inhomogeneous shear deformation using an asymmetric die were employed. The difference in intensity of <111>-<100> distributed texture between the two wires confirmed that the wire drawn under the asymmetric die condition experienced a higher amount of shear deformation. The extensive shear strain in the wire drawn under the asymmetric die condition gave rise to inhomogeneous primary and secondary recrystallization behavior. After annealing at $200^{\circ}C$, grains with <100> texture, which were larger than the surrounding recrystallized grains, were extensively present on one half circle of the wire drawn under the asymmetric die condition, while larger grains with <100> were sparsely observed around the middle region of the wire drawn under the regular condition. Interestingly, the area where the larger grains with <100> texture existed was identical to the area where the high shear strain occurred during drawing in both wires. During annealing at $400^{\circ}C$, grains with <112> texture started to grow abnormally at the center of both wires as a result of secondary recrystallization. After annealing at $900^{\circ}C$ grains with <112> due to secondary recrystallization occupied the entire region of the wire drawn under the regular condition. On the other hand, in the wire drawn under the asymmetric die condition and then annealed at $900^{\circ}C$, the <100> oriented grains as a result of the normal grain growth of the larger <100> grains which were observed after annealing at $200^{\circ}C$, coexisted with the abnormally grown <112> grains. These results indicate that dynamic recrystallization induced by the shear strain during drawing plays an important role in the inhomogeneity of the microstructure and texture of wires after annealing.

• 자원환경지질
• /
• 제26권1호
• /
• pp.41-54
• /
• 1993

경상분지 남동부에 위치한 울산광산은 석회암을 교대한 전형적인 calcareous skarn강상으로 Fe W광화작용 이외에도 Cu, Pb, Zn, As, Bi, Ni, Co, Cr, Ag, Sn, In, Te, Sb 등이 수반되는 다금속광화작용의 특성을 보여주고 있다. 본 광상은 직립에 가까운 파이프상 광체로 산출되며, 자철석과 함께 북측의 혼펠스와의 경계부근에 회중석이 부분적으로 광염되어 있다. 본 광상의 스카른대는 석회암 및 혼펠스를 교대한 괴상 스카른과 양자를 각기 절단하는 맥상스카른으로 구분된다. 괴상스카른은 석회암 기원의 스카른이 주체를 이루며, 이러한 스카른대는 규회석 스카른, 석류석 스카른, 단사휘석-석류석 스카른, 단사휘석 스카른으로 분류되며, 부분적으로 스카른대 주변부를 따라 거정질 방해석대가 존재하고 있다. 스카른 진화과정은 초기스카른 및 후기스카른의 두 시기로 분류되며, 초기스카른은 prograde한 스카른 생성시기로 초기에는 규회석, Mg-rich 단사휘석, Al-rich garnet가 주로 정출되며 광석광물은 거의 불모한 시기이나, 초기스카른의 말기로 진행됨에 따라 자철석과 회중석이 정출된다. 그리고, 후기스카른의 전반기까지는 Fe-rich 단사휘석, Fe-rich garnet와 함께 자철석 회중석이 연속적으로 정출되었으나, 후기스카른의 중기부터는 Ni, Co, As, Cu, Zn, Fe, Bi 등의 황화광물이 정출되는 다금속광화 작용의 특정을 보인다. 또한, 최후기 열수작용시기에는 섬아연석과 방연석 등의 Base-metal 황화광물이 주로 정출되는 연 아연 광화작용의 양상을 나타낸다. 이러한 각 광화시기별 스카른 광물과 광석광물의 변화양상은 고온의 열수용액이 천부로 유출되는 과정에서 광화용액의 온도가 급격히 떨어진 결과 (telescope)에 기인된 것으로 사료된다.

• 헤리티지:역사와 과학
• /
• 제52권3호
• /
• pp.160-171
• /
• 2019

나주 정촌고분 1호 석실 출토 소환두도는 내부 별도 장식이 없는 오각형 환두도이다. 또한 모도와 자도 2자루로 구성된 모자대도이다. 정촌고분 소환두도는 환두부, 병부, 신부, 초미금구로 구성되었다. 소환두도 환두는 철지은장(鐵地銀裝)이지만 은(銀)이 염화은으로 부식되면서 연보라색을 띠며 내부 철제 심의 부식물이 표면에 형성되었다. 염화은은 염화이온이 용해된 매장 환경에서 은이 수분과 반응하여 생성되는데, 가루 형태로 부식되어 유물의 형태 보존을 어렵게 한다. 정촌고분에서 함께 출토된 다른 은제 유물도 유사한 부식 형태를 보여주고 있다. 정촌고분 소환두도의 X선 투과조사 및 CT 분석 결과, 철제 외환에 T자형 슴베를 만들고 신부의 슴베와 연결하였다. 소환두도의 자도를 참고하여 모도의 형태를 유추하면, 모도는 환두, 병두금구, 병연금구를 은판(銀板)으로 감싸고 금제 환과 은제 선으로 병부를 장식하였다. 환두 슴베와 신부 슴베의 연결 방식은 리벳 구멍이 확인되지 않아 단접(鍛接)한 것으로 판단되었다. 초미금구는 철판으로 형태를 만들고 끝단을 견직물로 감싸고 그 아래를 은판과 금제 환으로 장식하였다. 정촌고분 소환두도는 금 은 철제 금속을 다양하게 사용하였으며 백제, 신라, 가야의 여러 가지 요소가 복합적으로 구성되어 주변 유적 및 여러 문화권 영향을 받았음을 확인할 수 있었다.

• Journal of Microbiology and Biotechnology
• /
• 제17권8호
• /
• pp.1242-1248
• /
• 2007

Genomic analysis of a hyperthermophilic archaeon, Thermococcus onnurineus NA1 [1], revealed the presence of an open reading frame consisting of 1,377 bp similar to ${\alpha}$-amylases from Thermococcales, encoding a 458-residue polypeptide containing a putative 25-residue signal peptide. The mature form of the ${\alpha}$-amylase was cloned and the recombinant enzyme was characterized. The optimum activity of the enzyme occurred at $80^{\circ}C$ and pH 5.5. The enzyme showed a liquefying activity, hydrolyzing maltooligosaccharides, amylopectin, and starch to produce mainly maltose (G2) to maltoheptaose (G7), but not pullulan and cyclodextrin. Surprisingly, the enzyme was not highly thermostable, with half-life ($t_{1/2}$) values of 10 min at $90^{\circ}C$, despite the high similarity to ${\alpha}$-amylases from Pyrococcus. Factors affecting the thermostability were considered to enhance the thermo stability. The presence of $Ca^{2+}$ seemed to be critical, significantly changing $t_{1/2}$ at $90^{\circ}C$ to 153 min by the addition of 0.5 mM $Ca^{2+}$. On the other hand, the thermostability was not enhanced by the addition of $Zn^{2+}$ or other divalent metals, irrespective of the concentration. The mutagenetic study showed that the recovery of zinc-binding residues (His175 and Cys189) enhanced the thermo stability, indicating that the residues involved in metal binding is very critical for the thermostability.

• 환경생물
• /
• 제28권2호
• /
• pp.101-107
• /
• 2010

Metal ions are essential to life. However, some metals such as mercury are harmful, even when present at trace amounts. Toxicity of mercury arises mainly from its oxidizing properties. Ionizing radiation (IR) is an active tool for destruction of cancer cells and diagnosis of diseases, etc. IR induces DNA double strand breaks in the nucleus, In addition, it causes lipid peroxidation, ceramide generation, and protein oxidation in the membrane, cytoplasm and nucleus. Yeasts have been a commonly used material in biological research. In yeasts, the physiological response to changing environmental conditions is controlled by the cell types. Growth rate, mutation and environmental conditions affect cell size and shape distributions. In this work, the effect of IR and mercury chloride (II) on the morphology of yeast cells were investigated. Saccharomyces cerevisiae cells were treated with IR, mercury chloride (II) and IR combined with mercury chloride (II). Non-treated cells were used as a control group. Morphological changes were observed by a scanning electron microscope (SEM). The half-lethal condition from the previous experimental results was used to the IR combined with mercury. Yeast cells were exposed to 400 and 800 Gy at dose rates of 400Gy $hr^{-1}$ or 800 Gy $hr^{-1}$, respectively. Yeast cells were treated with 0.05 to 0.15 mM mercury chloride (II). Oxidative stress can damage cellular membranes through a lipidic peroxidation. This effect was detected in this work, after treatment of IR and mercury chloride (II). The cell morphology was modified more at high doses of IR and high concentrations of mercury chloride(II). IR and mercury chloride (II) were of the oxidative stress. Cell morphology was modified differently according to the way of oxidative stress treatment. Moreover, morphological changes in the cell membrane were more observable in the frequently stress treated cells than the temporarily stress treated cells.

• 기술사
• /
• 제19권1호
• /
• pp.12-24
• /
• 1986

The number of visiters to Bukhan Mt. national park, generation quantity of solid waste and collection system were researched to consider a counterplan for the pollution control of the national park and study for developing the effective treatment of solid waste was tried through the proximate analysis of each component containing. Results obtained in this study were summerized as follows; The great part of visitors go on an excursion to the Bukhan Mt. national park during July and August and also, the solid waste was generated nearly a half of the total amount at the same period. The major collection facilities in the national park were waste basket and incineration box. But the incineration box was too large in volume and very far in distance, and its collection period was irregular, so it was cause to the congestion of solid waste and bad smell and dirty. Therefore, to complete collection of solid waste, we must set up the waste basket which able to find within 40～50m from the origination place of solid waste and induce the visitors to throw the solid waste. It was obtained as moisture content: 48.5 wt%, volatile solid: 28.4wt％, fixed solid: 23.1 wt％, lower heating value: 1,320kca1/kg from experimental analysis of solid waste. According to this analysis, the incineration operation is possible, but the generation quantity of solid waste was too small to construct incineration plant for heat recovery. It was found that it is suitable for the aerobic composting by mixing with the night soil which generate in the national park after the recovery of resources such as metals, glasses and plastics.

• Environmental Engineering Research
• /
• 제14권4호
• /
• pp.226-236
• /
• 2009

The performance of phytoremediation has proven effective in the removal of nutrients and metals from aqueous systems. However, little information is available regarding the behavior of pesticides and their removal pathways in aquatic environments involving plant-uptake. A detailed understanding of the kinetics of pesticide removal by plants and information on compound/plant partition coefficients can lead to an effective design of the phytoremediation process for anthropogenic pesticide reduction. It was determined that the reduction rates of four organophosphorus (OP) and two organochlorine (OC) pesticides (diazinon, fenitrothion, malathion, parathion, dieldrin, hexachlorobenzene [HCB]) could be simulated by first-order reaction kinetics. The magnitude of k was dependent on the pesticide species and found within the range of 0.409 - 0.580 $d^{-1}$. Analytical results obtained by mass balances suggested that differential chemical stability, including diversity of molecular structure, half-lives, and water solubility, would greatly influence the removal mechanisms and pathways of OPs and OCs in a phytoreactor (PR). In the case of OP pesticides, plant accumulation was an important pathway for the removal of fenitrothion and parathion from water, while pesticide sorption in suspended matter (SM) was an important pathway for removal of dieldrin and HCB. The magnitude of the pesticide migration factor (${\Large M}_p^{pesticide}$) is a good indication of determining the tendency of pesticide movement from below- to above-ground biomass. The uncertainties related to the different phenomena involved in the laboratory phyto-experiment are also discussed.

• 한국재료학회지
• /
• 제23권8호
• /
• pp.405-422
• /
• 2013

Atomic layer deposition(ALD) is a promising deposition method and has been studied and used in many different areas, such as displays, semiconductors, batteries, and solar cells. This method, which is based on a self-limiting growth mechanism, facilitates precise control of film thickness at an atomic level and enables deposition on large and three dimensionally complex surfaces. For instance, ALD technology is very useful for 3D and high aspect ratio structures such as dynamic random access memory(DRAM) and other non-volatile memories(NVMs). In addition, a variety of materials can be deposited using ALD, oxides, nitrides, sulfides, metals, and so on. In conventional ALD, the source and reactant are pulsed into the reaction chamber alternately, one at a time, separated by purging or evacuation periods. Thermal ALD and metal organic ALD are also used, but these have their own advantages and disadvantages. Furthermore, plasma-enhanced ALD has come into the spotlight because it has more freedom in processing conditions; it uses highly reactive radicals and ions and for a wider range of material properties than the conventional thermal ALD, which uses $H_2O$ and $O_3$ as an oxygen reactant. However, the throughput is still a challenge for a current time divided ALD system. Therefore, a new concept of ALD, fast ALD or spatial ALD, which separate half-reactions spatially, has been extensively under development. In this paper, we reviewed these various kinds of ALD equipment, possible materials using ALD, and recent ALD research applications mainly focused on materials required in microelectronics.

• 한국진공학회지
• /
• 제15권5호
• /
• pp.518-526
• /
• 2006

나노 다공성 알루미나 박막을 제작하고 이를 주형으로 사용해서 진공증착에 의해 규칙적으로 배열된 나노우물구조와 나노그물구조의 금속 박막들(알루미늄, 주석, 코발트)을 제작하였다. 원하는 금속물질을 증발시키기 위하여 저항가열 방법을 사용하였으며, 증착은 torr의 기저진공 속에서 수행되었다. 실험결과에 의하면, 나노우물과 나노그물 구조의 박막 중 어떤 구조가 합성되느냐 하는 것은 증착되는 물질의 양에 의해서 큰 영향을 받는다는 사실을 알 수 있었다. 세포의 크기가 100 nm이고 세공 직경이 60 nm인 다공성 알루미나 박막을 사용했을 때는 대략 우물구조를 합성하는데 필요한 질량의 절반이하 정도가 증착되게 되면 그물 구조가 합성되는 경향을 보여주었다.