• 한국분말재료학회지
• /
• 제24권1호
• /
• pp.6-10
• /
• 2017

This study investigates the main growth mechanism of InP during InP/ZnS reaction of quantum dots (QDs). The size of the InP core, considering a synthesis time of 1-30 min, increased from the initial 2.56 nm to 3.97 nm. As a result of applying the proposed particle growth model, the migration mechanism, with time index 7, was found to be the main reaction. In addition, after the removal of unreacted In and P precursors from bath, further InP growth (of up to 4.19 nm (5%)), was observed when ZnS was added. The full width at half maximum (FWHM) of the synthesized InP/ZnS quantum dots was found to be relatively uniform, measuring about 59 nm. However, kinetic growth mechanism provides limited information for InP / ZnS core shell QDs, because the surface state of InP changes with reaction time. Further study is necessary, in order to clearly determine the kinetic growth mechanism of InP / ZnS core shell QDs.

• 대한방사성의약품학회지
• /
• 제3권2호
• /
• pp.103-112
• /
• 2017

The combination of nanoparticle with radioisotope could give the in vivo information with high sensitivity and specificity. However, radioisotope labeling of nanoparticle is very difficult and radioisotopes have different physicochemical properties, so the radioisotope selection of nanoparticle should be carefully considered. $^{18}F$ was first option to be considered for labeling of nanoparticle. For the labeling of $^{18}F$ with nanoparticle, Prosthetic group is widely used. Iodine, another radioactive halogen, is often used. Since radioiodine isotopes are various, they can be used for different imaging technique or therapy in the same labeling procedures. $^{99m}Tc$ can easily be obtained as pertechnatate ($^{99m}{TcO_4}^-$) by commercial generator. Ionic $^{68}Ga$ (III) in dilute HCl solution is also obtained by generator system, but $^{68}Ga$ can be substituted for $^{67}Ga$ because of the short half-life (67.8 min). $^{64}Cu$ emits not only positron but also ${\beta}-particle$. Therefore $^{64}Cu$ can be used for imaging and therapy at the same time. These radioactive metals can be labeled with nanoparticle using the bifunctional chelator. $^{89}Zr$ has longer half-life (78.4 h) and is used for the longer imaging time. Unlike different metals, $^{89}Zr$ should use the other chelate such as DFO, 3,4,3-(LI-1,2-HOPO) or DFOB.

• 대한금속재료학회지
• /
• 제49권6호
• /
• pp.474-487
• /
• 2011

Bars of OFHC Cu with the diameter of 45 mm were processed by equal channel angular pressing up to 16 passes via route $B_c$, and homogeneity of their microstructures and mechanical properties was examined at every four passes which develop the equiaxed ultrafine grains. In general, overall hardness, yield strength and tensile strength increased by 3, 7, and 2 times respectively compared with those of unECAPed sample. Cross-sectional hardness exhibited a concentric distribution. Hardness was the highest at the center of bar and it decreased gradually from center to surface. After 16 passes, overall hardness decreased due to recovery and partial recrystallization. Regardless of the number of passage, yield strength and tensile strength were quite uniform at all positions, but elongation showed some degree of scattering. At 4 passes, coarse and ultrafine grains coexisted at all positions. After 4 passes, uniform equiaxed ultrafine grains were obtained at the center, while uniform elongated ultrafine grains were manifested at the upper half position. At the lower half position, grains were equiaxed but its size were inhomogeneous. It was found that inhomogeneity of grain morphology and grain size distribution at different positions are to be attributed to scattering in elongation but they did not affect strength. The present results reveal the high potential of practical application of equal channel angular pressing on fabrication of large-sized ultrafine grained bars with quite homogeneous mechanical properties.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.14-20
• /
• 2006

During the 11 year period of 1995-2005, there was about a 40% increase in the world copper demand mainly because of the Asian economic growth. In the increase, about a half was consumed by China. Most of the China's copper demand increase has been taken place over the final 5-6 years of that period. The growth is expected to continue for several years, and in 10 years or sooner the same situation is expected for India. Copper is the third metal in global demand, but its little abundance in the Earth's crust is not well recognized. From the production rate and the abundance, a copper shortage, or crisis, has a high probability than the other metals. Deep ocean mineral resources such as manganese nodules in the Clarion-Clipperton Fracture Zones, Kuroko-type massive seafloor sulfides (SMS), and cobalt-rich manganese crusts in the EEZ and the high sea areas have big potentials for the future sources. We need to re-evaluate their potentials as copper resources and other metals to realize their developments. The same situation is under progress in the hydro-carbon markets. Methane hydrates that are classified into non-conventional hydro-carbon resources have an important role as the future sources, too.

• 자원리싸이클링
• /
• 제20권4호
• /
• pp.23-35
• /
• 2011

대만의 도시광산 재자원화산업을 파악, 검토하기 위하여 대만의 도시광산 재자원화산업의 배경과 역사, 자원회수기금관리위원회 제도를 논하고 구리를 위주로하는 비철금속의 재자원화산업, 자동차의 리싸이클링 및 전기로제강분진(EAF Dust) 분야를 중점적으로 조사하였다. 대만은 국토면적과 인구에 비해서 구리를 위시히여 전반적인 금속소비량이 많다. 따라서 도시광산지원이 많고, 도시광산재자원화산업이 활발하다.

• 대한금속재료학회지
• /
• 제49권7호
• /
• pp.541-548
• /
• 2011

Thermomechanical fatigue (TMF) behavior of heat resistant austenitic stainless steel was evaluated in the temperature range from 100$^{\circ}C$ to peak temperatures of 600 to 800$^{\circ}C$; The fatigue lives under TMF conditions were plotted against the plastic strain range and the dissipated energy per cycle. In the expression of the inelastic strain range versus fatigue life, the TMF data obtained at different temperature ranges were located close to a single line with a small deviation; however, when the dissipated energy per cycle, calculated from the area of the stress-strain hysteresis loops at the half of the fatigue life, was plotted against the fatigue life, the data showed greater scattering than the TMF life against the inelastic strain range. A noticeable stress relaxation in the stress-strain hysteresis curve took place at the peak temperatures higher than 700$^{\circ}C$, but all specimens in this study exhibited cyclic hardening behavior with TMF cycles. Recrystallization occurred during the TMF cycle concurrent with the formation of fine subgrains in the recrystallized region, which is considered to cause the cyclic hardening of the steel.

• 대한금속재료학회지
• /
• 제49권6호
• /
• pp.488-492
• /
• 2011

Heat-treatable Al-Mg-Si-Cu alloy sheets, which are expected to have a growing demand, were fabricated by Cross rolling to improve their formability. The mechanical properties and texture of the sheets after the final annealing process were investigated by a tensile test, EBSD and XRD analysis. The grain size of the cross-rolled sheets was remarkably decreased compared to conventional rolled sheets, and the R-value of the cross-rolled sheets was notably increased by about one and a half times that of the conventional rolled sheet. Cube{001}<100> and cubic system orientations were strongly developed in conventional rolled sheets. However, randomized textures were formed in the cross-rolled sheets without specific texture. It is thought that much shear deformation was induced during the cross rolling. The results show that the cross rolling method is effective for improving the R-value of aluminum alloys sheets and their grain refinement. As a result, it is considered that cross rolling is effective for improving formability.

• 한국잡초학회지
• /
• 제17권2호
• /
• pp.214-219
• /
• 1997

토양중에 있어서 제초제(除草劑) alachlor 분해(分解)에 미치는 퇴비(堆肥), 화학(化學) 비료(肥料), 중금속(重金屬), 합성(合成) 세제(洗劑)의 영향(影響)에 대하여 연구한 결과를 요약하면 다음과 같다. 토양(土壤)중 alachlor는 1차 반응식(反應式)에 따라 분해(分解)되었으며 반감기(半減期)는 6.4일이었다. 퇴비(堆肥) 첨가(添加)는 alachlor의 분해(分解)를 촉진(促進)시켰다. 화학(化學) 비료(肥料)중 질소와 칼리 특히 질소 첨가에 의하여 alachlor의 분해(分解)가 촉진(促進)되었다. 토양중 alachlor의 분해(分解)는 중금속(重金屬)에 의하여 억제(抑制)되었으며 Cd, Cr, Ni, Zn, Cu 첨가(添加) 토양(土壤)중 반감기(半減期)는 각각 11.0, 8.3, 7.9, 7.2, 6.7일이었다. 합성(合成) 세제(洗劑) 첨가(添加) 또한 alachlor의 분해(分解)를 억제(抑制)시켰으며 반감기는 7.5일이었다. 각종(各種) 물질(物質)을 첨가(添加)한 토양(土壤)중에서 alachlor의 분해율(分解率)은 토양(土壤)의 microbial biomass나 호흡율(呼吸率)과 높은 정(正)의 상관(相關) 관계(關係)를 보여 각종(各種) 첨가(添加) 물질(物質)이 alachlor의 분해(分解)를 촉진(促進)혹은 억제(抑制)하는 것은 이들 첨가(添加) 물질(物質)이 분해(分解) 미생물(微生物)의 생육(生育)을 촉진(促進)또는 억제(抑制)하였기 때문으로 판단되었다.

• 대한치과교정학회지
• /
• 제33권5호
• /
• pp.351-358
• /
• 2003

니켈과 크롬은 대부분의 교정장치를 제작하는데 사용되는 합금을 구성하는 주요한 금속이다. 그러나 이들 금속은 과민반응, 피부염, 천식 등의 주요한 원인이 되며, 이들 금속의 우발적인 흡입에 의해 암이 유발될 수 있음이 보고된 바 있다 이에 하악 standard edgewise브라켓을 이용한 사분악의 교정장치를 $37^{\circ}C,\;,0.05\%$ NaCl용액에 저장하여 교정장치의 부식에 의해 유리된 니켈과 크롬을 Inductively Coupled Plasma(ICP) spectroanalyzer를 이용하여 측정하였다. 교정장치로부터, 1일 평균 $9.83-70.0{\mu}g/day$의 니켈이 유리되었으나, 크롬은 10ppb 측정한계에서 측정불가능 하였다. 니켈 유리량은 제품에 따라 유의한 차이를 가져왔다 Galvanic조건이나 Sand blasting처리는 니켈 유리량에 증가를 가져왔으나 통계학적으로 유의하지 않았다.

• 한국산학기술학회논문지
• /
• 제19권10호
• /
• pp.115-120
• /
• 2018

본 연구에서는 산업현장에서 널리 사용되고 있는 소형 유도전동기의 회전자를 생산공장에서 금형주조(die casting)로 제작 시 rotor core cast의 품질을 평가하기 위하여 주조해석 전용 프로그램을 사용하여 수치해석을 수행하였으며, 그 결과를 실험결과와 비교하여 다음과 같은 결론을 얻을 수 있었다. 첫째, 유도전동기 회전자의 고압 금형주조 시 고속으로 사출된 알루미늄 용탕의 충진 양상을 시간 경과에 따라 평가한 결과, 용탕은 하부 end ring 부를 먼저 충진하고 수평으로 이동하여 상부 end ring, core slot 부분을 충진하여 최종적으로 core slot 부분에서 충진이 완료된다. 둘째, mould 내부에서의 용탕의 충진 양상을 보면 상부 end ring, core slot 부분보다 하부 end ring 부분에서 용탕의 유동에 의한 와류가 발생하여 결함 발생이 예측되었으며, 현장 실험결과 하부 end ring 부 단면에서 작고 큰 다수의 결함이 발견되었다. 셋째, 금형주조 작업으로 양호한 품질의 회전자를 제작하기 위해서는 cast 형상 변경이나 작업조건 등 추가적인 연구가 필요하며 이에 대해서는 추후에 보고할 예정이다.