• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.103-109
• /
• 2009

Soils originated from limestone, located at the southern part of Kangwon province and Jecheon, Danyang of Chungbuk province are mainly composed of fine texture, and have different properties from soils originated from granite and granite gneiss, especially for water movement. This study was conducted for classification of hydrologic soil group (HSG) of soils originated from limestone by measuring the infiltration rate of surface soils and percolation rate of sub soils. Soils used for the experiment were 6 soils in total : Gwarim, Mosan, Jangseong, Maji, Anmi and Pyongan series. Infiltration and percolation rate were measured by a disc tension infiltrometer and a Guelph permeameter, respectively. Particle size distribution and organic matter content of the soils were analyzed. HSG, which was made by USDA NRCS(National Resources Conservation Service) for hydrology, of Gwarim series with O horizon of accumulated organic matter was classified as type A which show the properties of low runoff potential, rapid infiltration and percolation rate. HSG of Mosan series, which has high gravel content and very rapid permeability, was classified as type B/D because of the impermaeble base rock layer under 50cm from surface. HSG of Jangseong series with shallow soil depth was classified as type C/D owing to the impermaeble base rock layer under 50cm from surface. HSG of Maji series was type B, and HSG of Anmi series used as paddy land was type D because of slow infiltration and percolation rate caused by the disturbance of surface soil by puddling. HSG of Pyeongan series having a sudden change of layer in soil texture was type D because of the slow percolation rate caused a the layer.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2231_2232
• /
• 2009

기술의 발전과 고도의 산업화로 인해 전력소비자들이 이전에 비해 더욱 고품질의 전력공급을 원하게 되었고 이에 부합하여 전력공급 신뢰도 향상과 전력품질이 현재 중요한 연구과제로 대두되어 왔다. 계통의 특성에 따라 다르지만, 대략 송전 계통에서 발생하는 전체 고장 의 75~90%는 일시고장이고 이러한 일시고장을 제거하기 위한 재폐로 과정을 수행시 계통의 신뢰도 및 안정도 향상을 위하여 적응적으로 무전압 시간을 조절하는 것이 필요하다. 본 논문에서는 아크고장에 따른 무전압시간을 최소화시켜주는 HSGS(High Speed Grounding Switches)의 기능에 대해서 검토하고, EMTP로 모델링된 765kV 송전계통에 일시 고장을 발생시켜 HSGS의 투입여부에 따른, 1선 및 2선 지락사고에서의 2차아크 소호특성을 분석하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.634-639
• /
• 2001

In this paper, we discuss optimum process conditions of Hemispherical Grained Silicon formation for high density DRAM'S capacitor. In optimum process renditions, the phosphorous concentration, storage polysilicon deposition temperature and thickness of hemispherical grain silicon are in the range of 3.0-4.0E19atoms/㎤, 53$0^{\circ}C$ and 40(equation omitted), respectively. in the 64M bit DRAM capacitor using optimum process conditions, limit thickness of nitride is about 65(equation omitted). The results obtained in this study are applicable to process control and HSG-Si formation for high reliability and high density DRAM's capacitor.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.685-692
• /
• 2008

The goal of this paper is to set the research and development (R&D) strategic plan of Honam Sea Grant (HSG) program which is to secure the base technologies for the success of Jeollanamdo's policy projects in the area of maritime and fisheries. HSG's mission is to support science-based sustainable management, conservation and enhancement of Honam coastal and aquatic resources through research, extension and education. Firstly, 80 cases of Jeollanam-do's policy project and 48 cases of HSG's R&D project are compiled and classified into the five areas of maritime and fisheries. Secondly, typical key words are extracted from each five areas and assessed the inherent meanings of each key words using quarterly segmented meaning allocation techniques with 'intended for practical use', 'intended for theoretical use', 'intended for future', and 'intended for current'. Then, we proposed R&D strategic plan based on the evaluation results and, it's practical use is also discussed.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.246-254
• /
• 1993

In order to increase the capacitance of storage electrode in the DRAM capacitor, two approaches were performed. First, hemispherical and rugged poly silicon films were made by LPCVD to increase the effective surface area of storage electrode. The even surface morphology of conventional poly silicon electrode was changed into the uneven surface of hemispherical of rugged poly silicon films. Second, PECVD $Ta_2O_5$ dielectric films were deposited and thermally treated to study the dielectrical characteristics of $Ta_2O_5$ film on each electrode. MIS capacitors with $Ta_2O_5$ films were electrically characterized by I-V, C-V and TDDB measurements. As a result, the capacitance of the electrode with uneven surface were increased by a factor of 1.2~1.5 and leakage current was increased compared with those of even surface. TDDB result indicates that the electrode with uneven surface has dielectrically more degraded than that of even surface. These results can be helpful as a basic research to develop new generation DRAM capacitors with $Ta_2O_5$ films.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.5
• /
• pp.400-408
• /
• 2007

In this paper, development of the 8kW parallel module converter is presented. For a effective configuration of FB-PWM converter, this paper proposes 4-parallel operation of 2 kw-module. FB converter of 2-kW module is controlled by phase shut PWM and in order to achieve ZVZCS, the simple auxiliary circuit is applied in secondary side. In order to achieve ZCS, control logic for auxiliary circuit operation is designed to reset the primary current during free-wheeling period. For output current sharing of 4-modules, the charge control is employed. The charge control logic is designed with phase shift PWM logic. Voltage controller is implemented by using DSP(TMS320LF2406) with A/D conversion data of the output current and voltage of each module. The developed converter is installed in PCU(Power Conditioning Unit) for HSG(High Speed Generator) in a vehicle and health monitoring system is implemented for vehicle operation test. Finally, performance of the developed converter is proved under practical operation of HSG.

• Coupled systems mechanics
• /
• v.9 no.2
• /
• pp.111-123
• /
• 2020

Wastewater treatment plants (WWTPs) with activated sludge system are widely used throughout the most common technologies in the world. Most treatment plants require optimization of certain treatment processes using dynamic modeling. A lot of examples of dynamic simulations require reliable data base of diurnal variation of the inflow and typical concentrations of parameters such as Chemical Oxygen Demand (COD), Total Kjeldahl Nitrogen (TKN), etc. Such detailed data are not available, which leads to problemsin the application of dynamic simulations. In many examples of plants, continuous flow measurements are only performed after the primary clarifier, whereas measurements from influent to the plant are missing, as is the case with the examples in this paper. In some cases, a simpler, faster and cheaper way can be applied to determine influent variations, such as the "HSG-Sim" method ("Hochschulgruppe Simulation"). "Hochschulgruppe Simulation" is a group of researchers from Germany, Austria, Switzerland, Luxembourg, Netherlands and Poland (see http://www.hsgsim.org). This paper presents a model for generating daily variations of inflow and concentration of municipal wastewater quality parameters, applied to several existing WWTPs in Bosnia and Herzegovina (B&H). The main goal of the applied method is to generate realistic influent data of the existing plants in B&H, in terms of flow and quality, without any prior comprehensive survey and measurements at the site. The examples of plants show the influence of overflow facilities on the dynamics of input flow and quality of wastewater, and a strong influence of the problems of the sewerage systems.

• Clinical and Experimental Reproductive Medicine
• /
• v.30 no.2
• /
• pp.141-150
• /
• 2003

Objective: To evaluate whether diagnostic laparoscopy before transcervical fallopian tube catheterization (TFTC) would improve tubal recanalization rate and pregnancy rate in patients with bilateral proximal tubal blockage in hysterosalpingogram (HSG). Methods: The retrospective study was performed in those underwent TFTC from January 1998 to December 2001. A total of 50 patients with bilateral proximal tubal blockage in HSG were subjected to TFTC sequentially using repeated HSG (rHSG), selective salpingography (SS) followed by tubal catheterization (TFTC). Each procedure was terminated once patency had been achieved without proceding to the next technique. In Group A patients (n=35, 64 tubes), diagnostic laparoscopy was performed before TFTC was taken to exclude the tube combined with peritubal adhesion or distal tubal pathology. In Group B, patients (n=15, 26 tubes) were performed TFTC without diagnostic laparoscopy. Results: There were significant difference in clinical pregnancy rate (45.7% vs 15.4%, p=0.034) but no differences were found in recanalization rate (75.0% vs 73.1%) and complication rate (8.6% vs 13.3%). Although there is no signficant difference, more tubes were canalized by SS, which means tubal obstruction rather than occlusion, in Group A (25.0% vs 5.3%, p=0.069). Conclusion: Diagnostic laparoscopy would be effective in the selection of tube for the relatively inexpensive and less invasive TFTC or patients in need of assisted reproductive technologies. With the tubes without combined peritubal adhesion or distal tubal pathology, pregnancy rate was significantly increased.

• Journal of Nutrition and Health
• /
• v.41 no.8
• /
• pp.776-785
• /
• 2008

Maternal stress was one of the common symptoms that pregnant women could have experienced during pregnant period. The purpose of this study was to investigate the relation of maternal stress with maternal nutrients intake and pregnancy outcome. Subjects were 248 pregnant women and were recruited at two hospitals in Seoul area. Individual stress levels were divided by the stress scores (total 41 scores), as low stressed group (< 12) and high stressed group (${\geqq}12$). The social characteristics, nutrient intake, anthropometric measurements and pregnancy outcome were compared between low stressed group (LSG) and high stressed group (HSG) to recognize risk factor of maternal stress. We found that subjects experience stress by various factors which were concern about newborn (40.4%), concern about health (28.8%), economic difficulties (13.2%), depress (10.1%), family relationship (2.9%), concern of house work (2.5%), human relationship (2%). In HSG, unemployed rate (p < 0.05) and pre-pregnancy BMI (p < 0.05) were higher than in LSG. Family size in HSG was larger than that in LSG (p < 0.01). Doing regular exercise with the light activity level was significantly higher in LSG (p < 0.05). The nutrient intake in LSG was slightly higher than that in HSG, but not statistically significant. Pregnancy outcome was not significantly affected by the maternal stress. In conclusion, the risk of maternal stress may be related with a life style during pregnancy. Therefore, life style for maternal stress control, such as weight control and regular exercise is recommended to prevent maternal stress.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2769-2772
• /
• 2003

This paper presents results of the development of the Turbo-generator system with structure which is HSG(High Speed Generator) installed to high speed gas-turbine engine directly. Turbo-generator with high speed motor-generator directly has many advantages aspects of weight, size, lubrication system and complexity of the system compared of conventional turbo-generator system with gear-box. But because of direct high speed operation of the high speed generator, we have to need stable high speed motor driving algorithm for perfect engine ignition when gas turbine starting. Also we have to need design of the PCU(Power Conditioning Unit) for converting high speed AC output power to conventional AC power or needed DC power.