• 한국광학회지
• /
• 제12권3호
• /
• pp.153-157
• /
• 2001

들뜬 상태 HF* 분자으 형광세기를 측정하여 불소-수소 연소 유도에 의한 HF 레이저발진을 위한 조업조언을 논하였다. 불소원자 생산을 위한 적정 불소 주입 조건은 수소연료 주입 몰(mole)수의 두 배이었다. 들뜬 상태 HF*분자 생산을 위하여 슬릿형태의 이차원적 구조를 가지는 연소노즐을 이용하였으며, 이차 수소연료의 주입 몰수가 불소기체 주입 몰수의 1.3배 일 경우 들뜬 상태 HF* 분자의 형광세기는 최대를 나타내었다.

• 한국세라믹학회지
• /
• 제41권9호
• /
• pp.637-641
• /
• 2004

We investigated the effects of SiH$_4$ gas on the surface of Hf-silicate films during the deposition of polycrystalline (poly) Si films and the thermal stability of sputtered Hf-silicate films in poly Si/Hf-silicate structure by using High Resolution Transmission Electron Microscopy (HR-TEM) and X-ray Photoelectron Spectroscopy (XPS). Hf-silicate films were deposited by using DC-mag-netron sputtering with Hf target and Si target and poly Si films were deposited at 600$^{\circ}C$ by using Low Pressure Chemical Vapor Deposition (LPCVD) with SiH$_4$ gas. After poly Si film deposition at 600$^{\circ}C$, Hf silicide layer was observed between poly Si and Hf-silicate films due to the reaction between active SiH$_4$ gas and Hf-silicate films. After annealing at 900$^{\circ}C$, Hf silicide, formed during the deposition of poly Si, changed to Hf-silicate and the phase separation of the silicate was not observed. In addition, the Hf-silicate films remain amorphous phase.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.117-117
• /
• 2007

The physical and electrical properties of nitrided Hf-silicate films, incorporated by NO gas annealing, were investigated by XPS, NEXAFS, TEM and C-V measurement. We confirmed the nitrogen incorporation during NO gas annealing treatment effectively enhances the thermal stability of Hf-silicate. The suppression of phase separation was observed in Hf-silicate films with high nitrogen contents. The negative shift of threshold voltage is caused by the incorporation of nitrogen in the hafnium silicate films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.74-77
• /
• 2004

[ $HfO_2$ ] dielectric layers were grown on the p-type Si(100) substrate by metalorganic molecular beam epitaxy(MOMBE). Hafnium $t-butoxide[Hf(O{\cdot}t-C_4H_9)_4]$ was used as a Hf precursor and Argon gas was used as a carrier gas. The thickness of the layers was measured by scanning electron microscopy (SEM) and high-resolution transmission electron measurement(HR-TEM). The properties of the $HfO_2$ layers were evaluated by X-ray diffraction(XRD), high frequency capacitance-voltage measurement(HF C-V), current-voltage measurement(I-V), and atomic force measurement(AFM). HF C-V measurements have shown that $HfO_2$ layer grown by MOMBE has a high dielectric constant(k=19-21). The properties of $HfO_2$ films are affected by various process variables such as substrate temperature, bubbler temperature, Ar, and $O_2$ gas flows. In this paper, we examined the relationship between the $O_2/Ar$ gas ratio and the electrical properties of $HfO_2$.

• 한국가스학회지
• /
• 제17권4호
• /
• pp.26-32
• /
• 2013

산업현장에서 중대산업사고를 예방하기 위해서는 원천적으로 위험물질의 사용을 금지하고 안전이 확보된 대체물질을 사용하는 것이 최상의 안전을 확보하는 방법이다. 그러나 대체물질의 비효율적인 경제성과 생산기술의 부재로 인해 위험물질을 취급할 수밖에 없는 상황이라면 사고가 발생하지 않도록 예방을 철저하게 하는 것이 차선의 안전대책이라 하겠다. 이에 본 연구는 최근 연속적인 누출사고로 인해 위험성이 대두 되었음에도 산업현장에서 사용 및 취급될 수밖에 없는 HF에 대해 누출사고가 발생함과 동시에 향후에도 누출사고 가능성이 높은 HF 충진공정의 위험성 평가시 사고결과 영향분석과 비상조치계획 수립에 효율적으로 활용 할 수 있는 사고 시나리오를 발굴 및 선정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.116-116
• /
• 2007

We investigated the characteristics of the Hafnium silicate (Hf-silicate) film which is grown by ALD (atomic layer deposition). The Hf-silicate films that were annealed by the RTP. The physical and electrical properties of nitrided Hf-silicate films, incorporated by NO gas and $NH_3$ gas annealing, were investigated by XPS, TEM and I-V measurement. We confirmed the nitrogen incorporation during NO gas annealing treatment effectively enhances the thermal stability of Hf-silicate. The tendency of nitnitridation in NO gas and $NH_3$ is different. Leakage current is improved in post NO gas annealing.

• Transactions on Electrical and Electronic Materials
• /
• 제15권3호
• /
• pp.164-169
• /
• 2014

We investigated the etching characteristics of $HfAlO_3$ thin films in $O_2/Cl_2/Ar$ and $O_2/BCl_3/Ar$ gas, using a high-density plasma (HDP) system. The etch rates of the $HfAlO_3$ thin film obtained were 30.1 nm/min and 36 nm/min in the $O_2/Cl_2/Ar$ (3:4:16 sccm) and $O_2/BCl_3/Ar$ (3:4:16 sccm) gas mixtures, respectively. At the same time, the etch rate was measured as a function of the etching parameter, namely as the process pressure. The chemical states on the surface of the etched $HfAlO_3$ thin films were investigated by X-ray photoelectron spectroscopy. Auger electron spectroscopy was used for elemental analysis on the surface of the etched $HfAlO_3$ thin films. These surface analyses confirm that the surface of the etched $HfAlO_3$ thin film is formed with nonvolatile by-product. Also, Cl-O can protect the sidewall due to additional $O_2$.

• 한국진공학회지
• /
• 제21권5호
• /
• pp.273-278
• /
• 2012

현재 Hf (Hafnium)을 기반으로한 게이트 유전체의 연구는 여러 분야에서 다양하게 진행되어져 왔다. 이는 기존의 $SiO_2$보다 유전상수 값이 크고, 또한 계속되는 scaling-down 공정에서도 양자역학적인 터널링을 차단하는 특성이 뛰어나기 때문이다. MOSFET 구조에서 유전체 박막의 두께 감소로 인한 전기적 특성 저하를 보완하기 위해서 high-K 재료가 대두되었고 현재 주를 이루고 있다. 그러나 현재까지 $HfO_2$에 대한 nano-mechanical 특성 연구는 부족한 상태이므로 본 연구에서는 게이트 절연층으로 최적화하기 위하여 $HfO_2$ 박막의 nano-mechanical properties를 자세히 조사하였다. 시료는 rf magnetron sputter를 이용하여 Si (silicon) 기판 위에 Hafnium target으로 산소유량(4, 8 sccm)을 달리하여 증착하였고, 이후 furnace에서 400에서 $800^{\circ}C$까지 질소분위기에서 20분간 열처리를 실시하였다. 실험결과 산소 유량을 8 sccm으로 증착한 시료가 열처리 온도가 증가할수록 누설전류 특성 성능이 우수 해졌다. Nano-indenter로 측정하고 Weibull distribution으로 정량적 계산을 한 결과, $HfO_2$ 박막의 stress는 as-deposited 시료를 기준으로 $400^{\circ}C$에서는 tensile stress로 변화되었다. 그러나 온도가 증가(600, $800^{\circ}C$)할수록 compressive stress로 변화 되었다. 특히, $400^{\circ}C$ 열처리한 시료에서 hardness 값이 (산소유량 4 sccm : 5.35 GPa, 8 sccm : 5.54 GPa) 가장 감소되었다. 반면에 $800^{\circ}C$ 열처리한 시료에서는(산소유량 4 sccm : 8.09 GPa, 8 sccm : 8.17 GPa) 크게 증가된 것을 확인하였다. 이를 통해 온도에 따른 $HfO_2$ 박막의 stress 변화를 해석하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권2호
• /
• pp.95-102
• /
• 2001

Hafnium oxide thin films for gate dielectric were deposited at $300^{\circ}C$ on p-type Si (100) substrates by plasma enhanced chemical vapor deposition (PECVD) and annealed in $O_2$ and $N_2$ ambient at various temperatures. The effect of hydrogen treatment in 4% $H_2$ at $350^{\circ}C$ for 30 min on the electrical properties of $HfO_2$for gate dielectric was investigated. The flat-band voltage shifts of $HfO_2$capacitors annealed in $O_2$ambient are larger than those in $N_2$ambient because samples annealed in high oxygen partial pressure produces the effective negative charges in films. The oxygen loss in $HfO_2$films was expected in forming gas annealed samples and decreased the excessive oxygen contents in films as-deposited and annealed in $O_2$ or $N_2$ambient. The CET of films after hydrogen forming gas anneal almost did not vary compared with that before hydrogen gas anneal. Hysteresis of $HfO_2$films abruptly decreased by hydrogen forming gas anneal because hysteresis in C-V characteristics depends on the bulk effect rather than $HfO_2$/Si interface. The lower trap densities of films annealed in $O_2$ambient than those in $N_2$were due to the composition of interfacial layer becoming closer to $SiO_2$with increasing oxygen partial pressure. Hydrogen forming gas anneal at $350^{\circ}C$ for samples annealed at various temperatures in $O_2$and $N_2$ambient plays critical role in decreasing interface trap densities at the Si/$SiO_2$ interface. However, effect of forming gas anneal was almost disappeared for samples annealed at high temperature (about $800^{\circ}C$) in $O_2$ or $N_2$ambient.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.115-121
• /
• 2002

In this research we have investigated the characteristics of ultra thin $HfO_2 /SiON$stack structure films using several analytical techniques. SiON layer was thermally grown on standard SCI cleaned silicon wafer at $825^{\circ}C$ for 12sec under $N_2$O ambient. $HfO_2 /SiON$$_4$/$H_2O$ as precursors and $N_2$as a carrier/purge gas. Solid HfCl$_4$was volatilized in a canister kept at $200^{\circ}C$ and carried into the reaction chamber with pure $N_2$carrier gas. $H_2O$ canister was kept at $12^{\circ}C$ and carrier gas was not used. The films were grown on 8-inch (100) p-type Silicon wafer at the $300^{\circ}C$ temperature after standard SCI cleaning, Spectroscopic ellipsometer and TEM were used to investigate the initial growth mechanism, microstructure and thickness. The electrical properties of the film were measured and compared with the physical/chemical properties. The effects of heat treatment was discussed.