• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.9
• /
• pp.614-623
• /
• 2008

This paper presents the results of a laboratory study on the thermal conductivity of and(silica, quartzite, limestone, sandstone, granite and two masonry sands)-water mixtures used for ground heat exchanger backfilling materials. Nearly 260 tests were performed in a thermal conductivity measuring system to characterize the relationships between the thermal conductivity of mixtures and the water content. The experimental results show hat the thermal conductivity of mixtures increases with increasing dry density and with increasing water content. The most widely used empirical prediction models for thermal conductivity of soils were found inappropriate to estimate the thermal conductivity of unsaturated sand-water mixtures. An improved model using an exponential relationship to compute the thermal conductivity of dry sands and empirical relationship to assess the normalized thermal conductivity of unsaturated sand-water mixtures is presented.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.176-182
• /
• 1988

The exergy analysis on the heat storage performance of the senible heat storage unit which consists of the heat storage material in the concentric annulus and the hot fluid flowing through the inner tube is performed. Heat transfer characteristics which are necessary for the performance of the exergy analysis is obtained from the energy balance equations and the second law of thermodynamics. As the index of heat storage performance, the exergy lossnumber $N_{s}$, and exergy storage ratio from the concepts of the second law of thermodynamics are defined. Results are ovtained for the grometry of the storage unit, the Biot number Bi, ambient temperature $T_{o}$ as parameters. From these results the exergy storage ratio can be considered as the efficiency of the hat storage unit and is introduced as a guide to design.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.1152-1158
• /
• 2016

This study was used samples, mackerel (Scomber japonicas), Japanese Spanish mackerel (Scomberomorus niphonius), alaska pollock (Theragra chalcogramma), yellow croaker (larimichthys crocea) known as some of the major species fisheries products in Korea We were investigated temperature change during thawing processing, water holding capacity, drip loss, extractive-nitrogen and viable cell count by various thawing methods, thawing at the room temperature (TRT), hot-air thawing (HAT), aeration thawing (AT), high-frequency thawing (HFT). The temperature changes have taken 2~3 hours in HFT and 24 hours by TRT. The expressible drip loss was 0.47~0.87 g/100 g in HFT, 1.91~4.42 g/100g in TRT, 1.31~4.93 g/100g in HAT, and 2.01~4.59 g/100g in AE. The water holding capacity was higher samples thawing by HFT than other thawing methods. Extractive-nitrogen was 276~452 mg/100 g in HFT, 177.21~420.27 mg/100 g in TRT. Viable cell count was $10^2$ to $10^3$ in HFT, $10^3$ to $10^5$ in other thawing methods. The processing speed and uniformity by HFT was minimized the risk of product degradations (drip losses, deterioration of sensorial, chemical and physical characteristics, bacteria growth, etc.), thus helping to preserve at its best the product quality than those by thawing methods. Therefore, HFT was expected to make high-quality thawing products anticipate future thawing technology

• Fire Science and Engineering
• /
• v.24 no.1
• /
• pp.40-45
• /
• 2010

Asymmetric Slimflor Beam had been unveiled with Thor beam (Hat beam) in Sweden since the late 1970s and had been developed by British Steen and SCI. In the major advanced countries in Europe after the early 1990s have interested in and developed this method, it has been concrened as the absence of hot-rolled section steel in the United Kingdom and welded of asymmetric section steel in Finland in the 2000s. It can be increase total floor area about 10%, save the interior and exterior materials, reduce the waste through reduction of the floor height. And it has more excellent fire resistance performance because less exposed than a regular composite steel beam in fire. This study is purpose that, a fire resistance performance of the Asymmetric Slimflor Beam in fire, it compared the temperature range with deflection of structure by fire behavior and load ratio of structure through change the shape of the steel cross-section in standard fire condition.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.428-431
• /
• 2008

Korea Aerospace Research Institute(KARI) is achieving the Korea Space Launch Vehicle(KSLV) program according to National Space Technology Development Program. KSLV-I will be composed to liquid propellant(first stage) and solid propellant(second stage) propulsion system. The propulsion system of KSLV-I second stage is solid kick motor with high expansion ratio and its starting altitude is 300km high. In order to verify the performance of upper stage propulsion system designed to operate in the upper atmosphere, test facility which can simulate high altitude is needed. High Altitude Simulation Test Facility is composed to Thrust Measurement System, Control & Measurement system, Diffuser, SKID for cooling water supply to diffuser, CCTV, fire protection system and so on. This paper introduces TMS adapted to High Altitude Simulation Test for KSLV-I Kick Motor Development and results of hot firing test for its performance verification.

• Steel and Composite Structures
• /
• v.36 no.4
• /
• pp.383-398
• /
• 2020

This paper investigates the progressive collapse behavior of 3D steel-framed gravity buildings under fires with a cooling phase. The effect of fire protections and bracing systems on whether, how, and when a gravity building collapses is studied. It is found that whether a building collapses or not depends on the duration of the heating phase, and it may withstand a "short-hot" fire, but collapses under a mild fire or a "long-cool" fire. The collapse time can be conservatively determined by the time when the temperature of steel columns reaches a critical temperature of 550 ℃. It is also found that the application of a higher level of fire protection may prevent the collapse of a building, but may also lead to its collapse in the cooling phase due to the delayed temperature increment in the heated members. The tensile membrane action in a heated slab can be resisted by a tensile ring around its perimeter or by tensile yielding lines extended to the edge of the frame. It is recommended for practical design that hat bracing systems should be arranged on the whole top floor, and a combination of perimeter and internal vertical bracing systems be used to mitigate the fire-induced collapse of gravity buildings. It is also suggested that beam-to-column connections should be designed to resist high tensile forces (up to yielding force) during the cooling phase of a fire.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.9-14
• /
• 1997

The effect of freezing, thawing and blanching on the change of extractable pigment content of purple sweet potato (PSP) was investigated. Freezing at $-5^{\circ}C$ was more effective than freezing at $-20^{\circ}C\;or\;-40^{\circ}C$, and rapid thawing methods such as microwave heating or hat air blast heating were effective than slow thawing methods such as thawing at $4^{\circ}C\;or\;20^{\circ}C$. Inactivation of enzymes, which cause pigment destruction during thawing, by blanching before freezing was necessary to obtain the highest possible amount of extractable pigment from PSP. Microwave blanching for $3{\sim}4$ min or hot air blanching for $10{\sim}15$ min were effective in extracting pigment from PSP.

• Korean Journal of Rural Living Science
• /
• v.8 no.2
• /
• pp.119-124
• /
• 1997

In this study we tried to give a decision on propriety of working conditions, to present ideas on reducing work loads, and to grope for efficiency of agricultural works. For this we examined the actual working conditions of cultivating welsh onion in the summer ground. And we improved harmful factors that affect farmer's health by considering results of previous study and farmer's subjective sensation. And we measured. compared, and analyzed the farmer's work loads before and after improvement. The results of this study are as follows ; 1. According to examine the actual working conditions of cultivating welsh onion in the summer ground, farmers have experienced physical and mental chronic fatigue on the basis of farmer's appel to eye - fatigue and sun - burned skin on hot working environment including excessive ultraviolet rays, the rough ground condition, inconsistent arrangement of working stand and sorter, heavy - weared habits, and unsuitable working posture. 2. When we improved harmful factors that affect farmer's health, conformed the effects on important work efficiency index such as heart rate, electromyovolume, body temperature, and microclimate inside clothing and work loads were decreased by eliminating the hillock and obstacles of ground, decreasing the clothing weight, using proper clothing appliances such as hat and sunglasses, controlling height of working stand and sorter suitably, improving the working postures and methods as using assistant appliances, alloting the working time and sequence effectively and presenting the light gymnastic exercises and rest for fatigue restoration.

• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.665-674
• /
• 1999

This paper confirmed the applicability of model to Korean rivers through the calibration and sensitivity analysis of LRCS rainfall runoff model for 18 storm events of Songriweon station in Nakdong river system, and achieved that LS and WLS were better than LAD by model fitting results. Diagonal element of "hat" matrix and affluence measures were used by analysis of parameter estimates, and parameter IL was the most important parameter in model output. By the results of error propagation according to parameter error, parameters IL, TP, F1 were affected by error propagation, and this is measure of sensitivity for the model output. This paper confirmed the relationship of calibration and sensitivity analysis of model through analysis of sensitivity coefficient, diagonal element $h_i$ and $D_i$._i$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.12
• /
• pp.1882-1888
• /
• 2019

Objective: An experiment was conducted to evaluate the effects of increasing levels of crude glycerin (0%, 6%, 12%, and 18%) used as a substitute for corn in lamb feed on the quantitative characteristics of the carcass. Methods: A total of 40 crossbred Santa $In{\hat{e}}s$ lambs that were four months old with a mean initial weight of $21.0{\pm}0.8kg$ were randomly distributed in four treatments with ten replicates. The animals were slaughtered after 66 days of confinement. The effects of crude glycerin as a replacement for corn in the diet of the lambs on the carcass characteristics, commercial cut weight and yield and carcass measurements were studied. Results: There was an increasing linear effect for body weight at slaughter with the replacement of corn by crude glycerin. The dry matter and metabolizable energy intakes, weight of the empty body, hot carcass weight and cold carcass weight showed a quadratic effect, with maximum crude glycerin levels estimated at 10.9%, 9.8%, 10.83%, 11.78%, and 11.35%, respectively. The initial pH was not influenced by the replacement of corn for crude glycerin, while the final pH presented a quadratic effect. The other parameters of the carcass and the weights and yields of commercial cuts were not influenced. There was also no effect of the diets on carcass morphometric measurements, except for the thoracic perimeter and the carcass compactness index, which presented quadratic and linear effects, respectively. Conclusion: Crude glycerin can replace up to 18% of corn because it favours muscle tissue deposition without promoting changes in the main carcass characteristics of lambs.