• 대한소아치과학회지
• /
• 제29권4호
• /
• pp.618-624
• /
• 2002

시판되는 보리차 3종(티백형 2종 알곡형 1종)이 우식유발 세균인 Streptococcus mutans와Streptococcus sobrinus가 타액피복 수산화인회석에 부착되는 정도와 이들 세균의 체표소수성에 미치는 영향에 대해 평가하였다. 모든 실험군에서 보리차로 처리하였을 때 수산화인회석에의 부착능과 세균의 체표소수성은 감소하였고 이 값은 보리차의 종류와 처리방법에 따라 상이하였다. 이러한 결과는 보리차에 함유된 활성성분인 catechins와 melanoidins의 영향 때문인 것으로 추측되며 보리차로 전 처리한 수산화인회석에 세균이 부착하는 정도가 감소한 것은 활성물질이 흡착되어 치아표면의 수용체가 세균의 부착소와 작용하는 것을 방해함으로써 치아우식증 병인론의 초기 단계인 부착에 영향을 미칠 수 있다는 것을 의미한다. 본 연구결과 보리차가 우식유발 세균의 주요 독력인자 중 하나인 부착능을 억제하므로 보리차가 이러한 세균이 일으키는 치아우식증을 억제할 수도 있다는 가능성을 보여준다.

• Molecular & Cellular Toxicology
• /
• 제3권1호
• /
• pp.36-45
• /
• 2007

Several features of the implant surface, such as topography, roughness, and composition play a relevant role in implant integration with bone. This study was conducted in order to determine the effects of different-coatings on Ti surfaces on the biological responses of a human osteoblast-like cell line (MG63). MG63 cells were cultured on HA (Hydroxyapatite coating on Titanium), Ano (HA coating on anodized surface Titanium), Zr (zirconium-coating on Titanium), and control (non-coating on Titanium). The morphology of these cells was assessed by SEM. The cDNAs prepared from the total RNAs of the MG63 were hybridized into a human cDNA microarray (1,152 elements). The appearances of the surfaces observed by SEM were different on each of the three dental substrate types. MG63 cells cultured on HA, Ano, Zr, and control exhibited cell-matrix interactions. In the expression of several genes were up-, and down-regulated on the different surfaces. The attachment and expression of key osteogenic regulatory genes were enhanced by the surface morphology of the dental materials used.

• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3269-3273
• /
• 2009

본 연구에서는 수용액 내의 오염물질 분해를 위하여 개발한 광촉매가 코팅된 실리카 비드의 광분해반응 사용에 따른 활성저하 문제를 해결하기 위하여 반응에 사용한 비드의 활성을 향상시킬 수 있는 재생 방법에 관한 실험을 수행하였다. 비드의 재생방법으로 표면 세정법을 선택하였으며, 세정액으로는 물(증류수), 계면활성제, 아세톤, 에탄올의 세정력이 서로 다른 4종의 용액을 사용하였다. 재생 과정은 서로 다른 4종의 세정액으로 반응에 사용하여 활성이 떨어진 비드를 세정한 후, 소성온도를 $100^{\circ}C$, $200^{\circ}C$, $300^{\circ}C$로 달리하여 30분간 처리하였다. 재생 처리과정은 각 1~3회 반복 수행하였으며, 서로 다른 조건에서 재생된 비드의 활성은 수용액 내의 methylene blue 광분해율로 측정하였다. 연구결과, 재생한 비드의 활성은 아세톤으로 세정한 후, $100^{\circ}C$에서 30분간 소성하였을 때 가장 우수한 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.422-426
• /
• 2008

Hemodialysis graft coated with paclitaxel prevents stenosis; however, large initial burst release of paclitaxel causes many negative effects such as drug toxicity and inefficient drug loss. Therefore we developed and tested a novel coating method, double dipping, to provide controlled and sustained release of paclitaxel locally. Expanded polytetrafluoroethylene (ePTFE) grafts were dipped twice into a solution of several different paclitaxel concentrations. In vitro release tests of the double dipping method showed that early burst release could be somewhat retarded and followed by sustained release for a long time. We observed the effect of paclitaxel coating by double dipping in porcine model of arterio-venous (AV) grafts between the common carotid artery and the external jugular vein. 12 weeks after constructing AV grafts, cross sections of the graft venous anastomosis were obtained and analyzed. Paclitaxel coated ePTFE grafts by double dipping were observed to prevent neointimal hyperplasia and therefore reduced stenosis of the arteriovenous hemodialysis grafts, especially at the graft venous anastomosis sites. Our results demonstrate that second dipping of ePTFE graft, which was already coated once with paclitaxel, washes off the drug on a surface of the graft and affects the ratio of paclitaxel on the surface to that of the inner space, possibly by diffusion: thus the early burst of drug can be somewhat reduced.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.282-283
• /
• 2005

Ion beam assisted deposition(IBAD) technique was used to produce biaxially textured polycrystalline MgO thin films for high critical current YBCO coated conductor. Hastelloy tapes were continuous electropolished with very smooth surface for IBAD-MgO deposition, RMS roughness of Hastelloy tape values below 2 nm and local slope of less than $1^{\circ}$. After the polishing of the tape an amorphous $Y_2O_3$ and $Al_2O_3$ are deposited Biaxially textured MgO was deposited on amorphous layer bye-beam evaporation with a simultaneous bombardment of high energy ions. We had developed the RHEED to measure in-situ biaxial texture of film surface as thin as tens angstrom. And also ex-situ characterization of buffer layers was studied using XRD and SEM. The full-width at half maximum(FWHM) out of plane texture of IBAD-MgO template is $4^{\circ}$.

• 한국결정성장학회지
• /
• 제14권3호
• /
• pp.83-89
• /
• 2004

본 연구에서는 우수한 생체적합성과 높은 기계적 성질을 갖는 아파타이트 생체세라믹스를 제조하기 위하여 수산화아파타이트(HA, $Ca_{10}(PO_4)_6(OH)_2/TiO_2$ 생체복합분말을 제조하였다. HA/$TiO_2$ 생체복합분말은 침전법과 졸겔법으로 각각 제조된 $TiO_2$ 분말과 수열합성법으로 제조된 HA 분말을 1:1의 무게분율로 혼합하여 제조하였다. HA/$TiO_2$ 생체복합분말은 $TiO_2$와 HA 입자의 크기와 모양에 따라 미세구조의 차이를 나타냈으며, $TiO_2$와 HA의 입자 크기가 서로 다른 복합분말의 경우, 작은 입자는 큰 입자의 표면에 둘러싸고 있었으나, $TiO_2$와 HA의 입자 크기가 비슷한 복합분말의 경우, $TiO_2$와 HA 입자가 서로 분산되어 균일한 미세구조를 가지고 있었다 균질한 미세구조를 갖는 복합분말은 소결체 제조 시 높은-소결밀도와 우수한 기계적 특성을 나타내었다.

• Progress in Superconductivity
• /
• 제6권1호
• /
• pp.74-78
• /
• 2004

YBCO coated conductor is one of the most promising materials as a new generations wire especially for practical power applications. In this work, $YBa_2$$Cu_3$$O_{7}$ -$\delta$/(YBCO) coated conductors (CC) were deposited by pulsed laser deposition (PLD) from buffer layers to superconducting layer on hi-axially textured metal tape. The oxide multilayer buffered substrate of architectures of $CeO_2$/$YSZ/Y_2$$O_3$ was fabricated by PLD at steady status. Then YBCO layer was deposited on RABiTS substrate by stationary and reel-to-reel (R2R) continuous process and we compared with deposition conditions of both processes. The degree of texture of each layer was investigated using X-ray diffraction including $\theta$-2$\theta$ scans, $\omega$-scans and $\Phi$-scans analysis. Their surface morphology was observed by scanning electron microscopy (SEM). The FWHM of the X-ray $\Phi$-scans and $\Phi$-scans indicated that YBCO and buffer layers closely replicate the in-plane and out-of-plane texture of metal tape. Critical current (Ic) at 77 K, self-field of 75.8 A/cm-width, critical temperature (Tc) of 85 K, and critical current density (Ic) of 3.7 MA/$\textrm{cm}^2$ were measured from coated conductor deposited by stationary process. And coated conductor deposited by R2R continuous process had Ic of 57.5 A/cm-width, Tc of 86.5 K and Jc of 2.0 MA/$\textrm{cm}^2$. The film also exhibits a homogeneous and dense surface morphology.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.78-94
• /
• 2005

Purpose. The purpose of this study was to compare the effects of various surface treatments by measuring resonance frequency and histomorphometric analyses. Material and methods. In 5 adult dogs, the mandibular premolar were extracted. Six months later, 30 screw titanium implants (Dentium Co., Seoul, Korea) 6mm in length and 3.4mm in diameter, were placed in the mandibles of 5 dogs. Implants were divided into five groups following to surface treatment methods ; Group 1 is machined controls, Group 2 is sandblasted with large grit and acid-etched (SLA), Group 3 is anodized (Autoelectric Co., Korea, 660Hz, Duty10), Group 4 is hydroxyapatite(HA) coated by ion beam assisted deposition(E-beam), Group 5 is hydroxyapatite(HA) coated with Sol-gel coating process. Resonance frequency was measured implant placement immediately, and 3, 6 weeks and 10 weeks of healing perods. With the animal subject's sacrifice 10 weeks after implantation, implants were removed on bloc and histologic and computer-based histomorphometric analyses were performed. Histomorphometric analysis involved quantification of the entire bone to metal contact around the implants. Statistical analyses were performed using the SPSS for Windows (ver. 9.0 SPSS Inc.) Statistical differences were considered significant at P<0.05. Results. The results were as follows : 1) In five groups, mean value of resonance frequency analysis(RFA) were highest in group 5 (Sol-gel implant) at implantation and those of group 4 (E-beam)was highest at 10 weeks . but there was no correlation between surface treatments and RFA. 2) In all surface treatment groups, the RFA values of implants decreased until 3 weeks and increased to 10 weeks. 3) The percentage of direct bone-to-implant contact (BIC) had statistical significance between five groups in cancellous bone, (P<0.05) the percentage of bone density inside the thread had no statistical significance between five groups. (P>0.05) 4) There was a significant difference between cortical bone and cancellous bone in BIC. (P<0.05) and bone density. (P<0.05) 5) There was a correlation between the RFA value of implants at 10 weeks and BIC in cancellous bone, and between the RFA value of implants at 10 weeks and bone density in cortical bone. (P<0.05). Conclusions. These results indicate that surface treatment does not affect the implant stability in case of good bone quality.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.267-284
• /
• 1991

Since the concept of a direct contact between bone and implants, without interposed soft- tissue layers, was reported by Dr. $Br{\aa}nemark$, there has been increasing necessity for correct under-standing of bone-implant interface and surrounding tissue response. Beside quality of bone, surgical technique, load applied to implants, one must consider implant materials, design and surface characteristics to obtain osseointegration. In this study HA plasma-sprayed implants, TPS implants and $Al_2O_3$ implants were inserted into the alveolar bone of dog and tissue response was observed with radiograph, stereoscope, light microscope, and scanning electron microscope. Results were as follows : 1. There was rapid and active bone formation in the region adjacent to HA plasma-sprayed implants but in the deep supporting bone only slight bone formation was seen. 2. There was considerable lamella bone formation in the region adjacent to TPS implants and the deep supporting bone became more compact. 3. There was some gap and sclerosing bone formation in the adjacent region of $Al_2O_3$ implants, but there was irregular new bone formation in the deep supporting bone. Therefore, it seems that $Al_2O_3$ is not adequate for osseointegrated implants.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1997년도 Proceedings of the 12th KACG Technical Meeting and the 4th Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.19-22
• /
• 1997

The surface modificaion of alumina by $Al_2$O$_3$/SiC nanocomposite coating was studied in terms of processing and microstructure. A powder slurry of 5 vol% SiC composition was dipcoated onto presintered alumina bodies and pressurelessly sintered at 1$700^{\circ}C$ for 2 h in $N_2$. The used of organic binder and plasticizer in the slurry preparation, and the control of the density of presintered alumina body were found to be necessary to avoid cracking and warping during processing. The nanocomposite coating well bonded to the alumina body with thickness about 110 ${\mu}{\textrm}{m}$. The average grain size of coating (2 ${\mu}{\textrm}{m}$) was much finer than that of alumina body (13 ${\mu}{\textrm}{m}$). Fracture surface observations revealed mostly transgranular fracture for the coating, whereas intergranular fracture for the alumina body. Some pores (about 6%) were observed in the coating layer, although the alumina body showed fully dense microstructure.