• IEIE Transactions on Smart Processing and Computing
• /
• 제5권4호
• /
• pp.235-242
• /
• 2016

The emerging High-Efficiency Video Coding (HEVC) standard attempts to improve coding efficiency by a factor of two over H.264/Advanced Video Coding (AVC) at the expense of an increase in computational complexity. Mode decision with motion estimation (ME) is still one of the most time-consuming computations in HEVC, as it is with H.264/AVC. Thus, fast mode decisions are not only an important issue to be researched, but also an urgent one. Several schemes for fast mode decisions have been presented in reference software and in other studies. However, the conventional hierarchical mode decision can be useless when block-level parallelism is exploited. This paper proposes operation-level exploration that offers more chances for early termination. An early termination condition is checked between integer and fractional MEs and between the parts of one partition type. The fast decision points of the proposed algorithm do not overlap those in previous works. Thus, the proposed algorithms are easily used with other fast algorithms, and consequently, independent speed-up is possible.

• 한국결정학회지
• /
• 제14권1호
• /
• pp.32-34
• /
• 2003

여러 조건하에서 Clonorchis sinensis로부터 helminth glutatione S-transferase(28kDa isozyme)가 결정화되었다. 0.05 M potassium 완충 용액 (pH 7.0) 내에서 10% polyehtylene glycol MME 550(PEG MME 5 K)에서 자라난 결정이 $3.0{\AA}$ 분해능까지 회절하였다. 이 결정의 결정학적 자료는 다음과 같다 : 단사정계 공간 군 C2, $a=95.83{\AA}$, $b=63.82{\AA}$, $c=235.09{\AA}$, ${\beta}=97.2^{\circ}$.

• Smart Structures and Systems
• /
• 제13권2호
• /
• pp.235-255
• /
• 2014

This paper mainly introduces recently developed technologies pertaining to the design and implementation of Active Mass Damper (AMD) control system on a high-rise building subjected to wind load. Discussions include introduction of real structure and the control system, the establishment of analytical model, the design and optimization of a variety of controllers, the design of time-varying variable gain feedback control strategy for limiting auxiliary mass stroke, and the design and optimization of AMD control devices. The results presented in this paper demonstrate that the proposed AMD control systems can resolve the issues pertaining to insufficient floor stiffness of the building. The control system operates well and has a good sensitivity.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.201-206
• /
• 2003

스테인레스 스틸 304 재료로 가공된 진공용기의 온도를 $235 ^{\circ}C$까지 올린 후 다시 상온까지 내리는 굽기 과정에서와 세 개의 열음극 전리 진공게이지를 켜거나 탈기체 시켰을 때 이탈하는 기체의 양과 조성을 잔류기체분석기로 측정하여 분석하였다. 굽기 과정에서 이탈된 기체는 주로 $H_2,\; CO,\; H_2O$ 등이었으나 상온에서의 잔류기체는 $H_2$와 CO가 대부분이었다. 게이지를 켜거나 탈가스 시킨 후 용기내의 잔류가스는 $H_2$와 $H_2O$가 대부분이었고 이탈된 기체의 양과 종류는 게이지마다 조금씩 차이가 있음을 알 수 있었다.

• 대한설비공학회지:설비저널
• /
• 제23권3호
• /
• pp.221-235
• /
• 1994

• 대한설비공학회지:설비저널
• /
• 제21권3호
• /
• pp.221-235
• /
• 1992

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1993년도 제27차 학술대회 초록집
• /
• pp.103-103
• /
• 1993

세침천자생검은 촉지되는 두경부 종물에 대한 일차적인 분석에 있어서 유용한 세포학적 진단과정이다. 또한 세침천자생검은 높은 정확도와 적은 조직손상때문에 두경부 종물의 선별검사로 널리 이용되어 왔다. 본 저자들은 1985년 3월부터 1992년 2월까지 7년간에 걸쳐 한양대학병원 이비인후과에서 두경부 종물에 시행한 세침천자생검 235례 중 병리조직학적인 확인 및 임상적 추적관찰이 가능하였던 188례를 비교 분석하여 다음과 같은 결과를 얻었다. 1) 악성 두경부 종물에 대한 세침천자생검의 민감도는 81.5%, 특이도는 96.8%이었다. 2) 악성 임파선 종물에 대한 세침천자생검의 민감도는 86.0%, 특이도는 88.9%이었다. 3) 타액선 세침천자생검의 민감도는 66.7%이며, 특이도는 81.8%이었다. 4) 연부조직, 골 및 구강에서의 민감도는 90%이며, 특이도는 95.8%이었다. 5) 결핵성 임파선염에 대한 위음성율은 55.2%였다. 6) 임파선의 크기나 위치에 따른 세침천자생검의 결과성적에는 통계학적으로 유의한 차이를 보이지 않았다.

• 한국전기전자재료학회논문지
• /
• 제18권7호
• /
• pp.662-666
• /
• 2005

Silicon nitride $(SiN_x)$ film is a promising material for anti-reflection coating and passivation of multicrystalline silicon (me-Si) solar cells. In this work, a plasma-enhanced chemical vapor deposition (PECVD) system with batch-type reactor tube was used to prepare highly robust $SiN_x$ films for screen-printed mc-Si solar cells. The Gas flow ratio, $R=[SiH_4]/[NH_3]$, in a mixture of silane and ammonia was varied in the range of 0.0910.235 while maintaining the total flow rate of the process gases to 4,200 sccm. The refractive index of the $SiN_x$ film deposited with a gas flow ratio of 0.091 was measured to be 2.03 and increased to 2.37 as the gas flow ratio increased to 0.235. The highest efficiency of the cell was $14.99\%$ when the flow rate of $SiH_4$ was 350 sccm (R=0.091). Generally, we observed that the efficiency of the mc-Si solar cell decreased with increasing R. From the analysis of the reflectance and the quantum efficiency of the cell, the decrease in the efficiency was shown to originate mainly from an increase in the surface reflectance for a high flow rate of $SiH_4$ during the deposition of $SiN_x$ films.

• 한국분말재료학회지
• /
• 제9권4호
• /
• pp.235-244
• /
• 2002

The effects of residual impurities on solid state sintering of the powder injection molded (PIMed) W-15wt%Cu nanocomposite powder were investigated. The W-Cu nanocomposite powder was produced by the mech-ano-chemical process consisting of high energy ball-milling and hydrogen reduction of W blue powder-cuO mixture. Solid state sintering of the powder compacts was conducted at $1050^{\circ}C$ for 2~10 h in hydrogen atmosphere. The den-sification of PIM specimen was slightly larger than that of PM(conventional PM specimen), being due to fast coalescence of aggregate in the PIM. The only difference between PIM and PM specimens was the amount of residual impurities. The carbon as a strong reduction agent effectively reduced residual W oxide in the PIM specimen. The $H_2O$ formed by $H_2$ reduction of oxide disintegrated W-Cu aggregates during removal process, on the contrary to this, micropore volume rapidly decreased due to coalescence of the disintegrated W-Cu aggregates during evolution of CO.It can be concluded that the higher densification was due to the earlier occurred Cu phase spreading that was induced by effective removal of residual oxides by carbon.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.235-238
• /
• 2016

Microstructure and magnetization behaviors of $MnBi/Fe_3B/Nd2_Fe_{14}B$ nanocomposite alloy have been investigated. It was found that the coercivity increased firstly and then decreased, and saturation magnetization decreased with the additon of MnBi alloy. The addition of 40 wt.% MnBi powder enhanced the coercivity from 192.8 kA/m to 311.2 kA/m. The ${\delta}M$ and D(H)-H plots suggested the occurrence of a stronger exchange-coupling occurring between the hard and soft magnetic phase for this sample. The dependence of coercivity with temperature was discussed in 40 wt.% $Mn_{55}Bi_{45}$/ 60 wt.% $Nd_{4.5}Fe_{76.5}Nb_{0.5}B_{18.5}$ alloy powder, and a positive temperature coefficient was founded from 298 K to 350 K.