• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.6
• /
• pp.9-17
• /
• 1994

In this study, a shifting algorithm of CVT was suggested for the two(2) driving modes : (1) power mode and (2) economy mode. Shifting algorithm must be obtained to make the engine run on the optimum operating line for the desired performance of the vehicle. Optimum operating lines of the engine were obtained by connecting the shortest way of the iso-power lines for the power mode and by connecting the shortest way of the BSFC curves for the economy mode. Also dynamic model of CVT vehicle was derived considering the throttle and the brake operation. By using the shifting algorithm and the CVT vehicle model, numerical simulations were performed to estimate the performance of CVT. Simulation results showed that comparing the performance of the conventional 4-speed automatic transmission, acceleration performance of the CVT vehicle was almost same with the AT vehicle for the power mode and the fuel economy of CVT was 14% superior than that of AT for the economy mode.

• Journal of Drive and Control
• /
• v.11 no.2
• /
• pp.16-21
• /
• 2014

The purpose of this paper is to construct a control algorithm for improving the driving efficiency of 4-wheel-drive in-wheel electric vehicles. The main parts of the vehicle were modeled and the input-output relations of signals were summarized using MATLAB/Simulink. A performance simulator for 4-wheel-drive in-wheel electric vehicles was developed based on the co-simulation environment with a commercial dynamic behavior analysis program called Carsim. Moreover, for improving the driving efficiency of vehicles, a torque distribution algorithm, which distributes the torque to the front and rear wheels, was included in the performance simulator. The effectiveness of the torque distribution algorithm was validated by the SOC simulation using the FTP-75 driving cycle.

• Bulletin of the Korean Mathematical Society
• /
• v.47 no.2
• /
• pp.263-274
• /
• 2010

In this paper, a new class of general nonlinear variational inclusions involving H-monotone is introduced and studied in Hilbert spaces. By applying the resolvent operator associated with H-monotone, we prove the existence and uniqueness theorems of solution for the general nonlinear variational inclusion, construct an iterative algorithm for computing approximation solution of the general nonlinear variational inclusion and discuss the convergence of the iterative sequence generated by the algorithm. The results presented in this paper improve and extend many known results in recent literatures.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.1-5
• /
• 2008

Although we can make a sparse matrices for LDPC codes, the encoding complexity per a block increases quadratically by $n^2$. We propose modified PEG algorithm using PEG algorithm having a large girth by establishing edges or connections between symbol and check nodes in an edge-by-edge manner. M-PEG construct parity check matrices. So we propose parity check matrices H form a dual-diagonal matrices that can construct a more efficient decoder using a M-PEG(modified Progressive Edge Growth).

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.14 no.2
• /
• pp.15-22
• /
• 2004

For an ElGamal-type signature scheme using a generate g of order q, it has been well-known that the message nonce should be chosen randomly in the interval (0, q-1) for each message to be signed. In (2), H. Kuwakado and H. Tanaka proposed a polynomial time algorithm that gives the private key of the signer if two signatures with message nonces 0＜$k_1$, $k_2$$\leq$Ο(equation omitted) are available. Recently, R. Gallant, R. Lambert, and S. Vanstone suggested a method to improve the efficiency of elliptic curve crytosystem using integer decomposition. In this paper, by applying the integer decomposition method to the algorithm proposed by Kuwakado and Tanaka, we extend the algorithm to work in the case when ｜$k_1$ ｜,｜$k_2$, ｜$\leq$Ο(equation mitted) and improve the efficiency and completeness of the algorithm.

• Journal of information and communication convergence engineering
• /
• v.7 no.2
• /
• pp.193-198
• /
• 2009

The H.264/ AVC video coding standard supports the intra prediction with various block sizes for luma component and a 8x8 block size for chroma components. This new feature of H.264/AVC offers a considerably higher improvement in coding efficiency compared to previous compression standards. In order to achieve this, H.264/AVC uses the Rate-distortion optimization (RDO) technique to select the best intra prediction mode for each block size, and it brings about the drastic increase of the computation complexity of H.264 encoder. In this paper, a fast block size decision algorithm is proposed to reduce the computation complexity of the intra prediction in H.264/AVC. The proposed algorithm computes the smoothness based on AC and DC coefficient energy for macroblocks and compares with the nonparametric criteria which is determined by considering information on neighbor blocks already reconstructed, so that deciding the best probable block size for the intra prediction. Also, the use of non-parametric criteria makes the performance of intra-coding not be dependent on types of video sequences. The experimental results show that the proposed algorithm is able to reduce up to 30% of the whole encoding time with a negligible loss in PSNR and bitrates and provides the stable performance regardless types of video sequences.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6C
• /
• pp.459-470
• /
• 2008

In this paper, we propose a fast ME (motion estimation) algorithm for MPEG-4 to H.264 Transcoder. Whereas 2 modes ($8{\times}8$, $16{\times}16$) are used for ME in MPEG-4 simple profile, ME using 7 modes is supported for further enhanced coding efficiency in H.264. The transcoding speed is affected dominantly by the computational complexity of encoder part in transcoder, where ME module of H.264 encoder has high complexity due to using 7 modes. In order to increase the speed of transcoding between MPEG-4 and H.264, we use 3 PMVs (predicted motion vectors) and the mode information of MBs (macroblocks) provided from the decoder part of transcoder. Since the proposed 3 PMVs are very close to an optimal motion vector, and we consider only some restricted modes according to the MB information transferred from decoder part, the proposed scheme can speed up the transcoding procedure without loss of image quality. We show experimental results which demonstrate the effectiveness of the proposed algorithm, where performance of our scheme is compared with that of the conventional fast algorithm for H.264.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.48-56
• /
• 2009

We propose a fast intra mode skip decision algorithm for H.264/AVC video encoding. Although newly added MB encoding algorithms based on various prediction methods increase compression ratio, they require a significant increase in the computational complexity because we calculate rate-distortion(RD) cost for all possible MB coding modes and then choose the best one. In this paper, we propose a fast mode decision algorithm based on an adaptive motion vector map(AMVM) method for H.264/AVC video encoding to reduce the processing time for the inter frame. We verify that the proposed algorithm generates generally good performances in PSNR, bit rates, and processing time.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1049-1058
• /
• 2009

After the efficiency of H.264 video compression has been announced, it replaced MPEG-2 standard in several applications. So transcoding methods of MPEG-2 to H.264 have been studying because there are variety devices and contents followed by MPEG-2. Although H.264 supported various service such as IPTV, DMB, digital broadcasting etc, but users using MPEG-2 devices cannot accessible to them. This paper propose H.264 to MPEG-2 transcoding for users of MPEG-2 devices without displacement H.264. The proposed method predicted a motion vector for MPEG-2 encoder after it extracted from motion vectors of variable blocks in H.264 to improve processing time. Also it predicted a optimal motion vector using modified boundary matching algorithm after grasped a special character for boundary and background of object. The experimental results from proposed method show a considerable reduction in processing time, as much as 65% averagely, with a small objective quality reduction in PSNR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4C
• /
• pp.321-329
• /
• 2008

H.264/AVC video coding standard enables a considerably higher improvement in coding efficiency compared with previous standards such as MPEG-2, H.263 and MPEG-4. To achieve this, for each macro-block in H.264/AVC, Rate-Distortion Optimization (RDO) technique is employed to select the best motion vector, reference frame, and macro-block mode. As a result, computational complexity is increased significantly whereas RDO achieve higher improvement. This paper presents fast intra mode selection algorithm based on constraints of frequency characteristics which are derived from intra coding modes of H.264/AVC. First of all, we observe the features of each intra mode through the frequency analysis of image. And then proposed Frequency Error Costs (FECs) are calculated to select the best mode which has minimum cost. Computational complexity is considerably reduced because rate-distortion costs only calculate the candidate modes which are set of best mode and its neighbouring two modes. Experimental results show that proposed algorithm reduces the complexity dramatically maintaining the rate-distortion performance compared with H.264/AVC reference software.