• 소음진동
• /
• 제9권4호
• /
• pp.714-719
• /
• 1999

Because the residual vibration of a gun barrel acts negatively on the firing of a large calibers gun, the fast stabilization of theresidual vibration is indispensible to the precise and successive firing. In this study, the residual vibrations of a gun barrel carrying a bore evacuator and a muzzle brake are investigated by the experimental method. The influence of the eigenfrequencies and the mode shapes of gun barrel on the fast stabilization of the residual vibration is studied for the various masses of bore evacuator and muzzle brake, the possition of bore evacutor. Also the relationships between the funcamental frequencies and the settling times of the gun barrel are investigated for the various parameters. The experiments to reduce the residual vibration using the viscoelastic damping treatment gives the best result among the various treatments for the reduction of residual vibration of the system.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.440-443
• /
• 2010

This paper deals with the method of vibration measurement of a gun barrel structure using mechanical filter. When a bullet with high speed is moving within a gun barrel type structure with low bending vibration frequencies, it is difficult to measure the bending vibration signals of the structure. For example, noncontact type sensors such as displacement or velocity sensor are not appropriate for the measurement of vibrational signals because of the movement effect of the equipment frame through the moving structures or effect of the ground vibration. One of contact type sensors such as accelerometer is profitable for measurement of vibrational signals because of its wide measurement ranges. In the case of a gun barrel structure including high vibrational signals like shock waves, however, it is necessary to propose vibration measurement method filtering high frequencies. The purpose of the paper is to propose the proper vibrational measurement technique filtering high frequencies of a gun barrel type structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.181-184
• /
• 2007

This paper deals with the method of vibration measurement of a gun barrel structure using mechanical filter. When a bullet with high speed is moving within a gun barrel type structure with low bending vibration frequencies, it is difficult to measure the bending vibration signals of the structure. For example, noncontact type sensors such as displacement or velocity sensor are not appropriate for the measurement of vibrational signals because of the movement effect of the equipment frame through the moving structures or effect of the ground vibration. One of contact type sensors such as accelerometer is profitable for measurement of vibrational signals because of its wide measurement ranges. In the case of a gun barrel structure including high vibrational signals like shock waves, however, it is necessary to propose vibration measurement method filtering high frequencies. The purpose of the paper is to propose the proper vibrational measurement technique filtering high frequencies of a gun barrel type structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.166-172
• /
• 1997

In order to find out relationship between hit probability and gun firing of a moving tank, a turret and flexible gun system model has been developed using the recursive flexible multibody dynamics. For a firing simulation model, nodal coordinates for a finite element model of a flexible gun have been employed to include traverse loads to the gun tube due to moving bullet and ballistic pressure. Modal coordinates are also used to represent the motion induced gun vibration before a firing occurs. An efficient switching technique from modal equations to nodal equations has been introduced for an entire gun firing simulation with rotating turret.

• 항공우주시스템공학회지
• /
• 제4권4호
• /
• pp.28-36
• /
• 2010

Current tanks have been developed to increase mobility and firepower, and its maximum range and destructive power are improved. This great change causes remained vibration of a gun barrel after firing. For this reason, people are trying to control vibration of gun barrel effectively. This thesis presents a modeling method and analysis results for gun barrel by using a thermal shroud as an absorber mass. DTS(Dynamically Tuned Shroud) is a vibration damping system using a thermal shroud as an added mass for decreasing remained vibration. The model has an advantage that the gun barrel's vibration can be decreased by dissipating a kinetic energy of thermal shroud without install an additional dynamic absorber to tip of the gun barrel. For analyzing the damping performance of the DTS, We derived an equation of motion of the barrel after setting a mathematical modeling, and found out the frequency analysis and tendency according to stiffness ratio between barrel and shroud.

• 소음진동
• /
• 제8권1호
• /
• pp.203-211
• /
• 1998

In order to find out relationship between hit probability and gun firing of a moving tank, a turret and flexible gun system model has been developed using a recursive flexible multibody dynamics. For a firing simulation model, nodal coordinates for a finite element model of a flexible gun have been employed to include transverse loads to the gun tube due to moving bullet and ballistic pressure. Modal coordinates are also used to represent the motion induced gun vibration before a firing occurs. An efficient switching technique from modal equations to nodal equation has been introduced for an entire gun firing simulation with a rotating turret.

• 대한기계학회논문집A
• /
• 제39권6호
• /
• pp.611-615
• /
• 2015

비행기 방어용 대공포는 저고도 방어체계로 사용되고 있으며, 방어능력 극대화를 위해 대부분 고발사율 대공포를 두개 이상 탑재하여 교전 시 명중률을 높이고 있다. 고 발사율 대공포의 경우, 포열진동 및 탄의 불균형 분산은 정확한 조준사격 및 명중률에 아주 결정적인 영향을 미치게 된다. 따라서 사격 진동 및 충격량을 감소하는 구조는 대공포 체계에서는 주요 설계 대상이다. 본 연구에서는 차량의 현가장치 특성에 따라 고발사율 대공포 체계에서 발사시스템의 진동충격으로부터 차단하는 능력을 향상시키고, Recurdyn 과 Adams 를 이용한 동적 거동해석과 실 사격 시험결과를 비교하여 명중률에 영향을 미치는 현가 형태, 위치 및 수량에 따른 체계 자세 흔들림을 예측하였다. 본 연구를 통하여 대공포에 적합한 현가장치와 포 스프링 등과 같은 구성품을 선정할 수 있는 기초연구를 수행하였다.

• The Journal of Korean Physical Therapy
• /
• 제32권4호
• /
• pp.245-249
• /
• 2020

Purpose: This study examined the effects of local vibration using a massage gun on the triceps surae flexibility by measuring the ankle dorsiflexion range of motion (ROM) compared to static stretching in healthy adults. Methods: Twenty healthy subjects were instructed in this study. They were allocated randomly to two groups: local vibration (LV) and static stretching (SS). The ankle dorsiflexion ROM was measured before and after the intervention in supine (open kinetic chain, OKC) and standing (closed kinetic chain, CKC). The LV group received local vibration using a massage gun for five minutes on their triceps surae, and the SS group stood on the Q board with a dorsiflexed ankle for five minutes. The ROM between pre- and post-intervention and the change in ROM between two groups were analyzed. A paired t-test was used to compare the ROM between pre- and post-intervention, while an independent t-test was used to compare the change in ROM between the two groups. Results: Both groups showed a significant difference between pre- and post-intervention in the position of both the OKC and CKC. The change in ROM, however, was not significantly different between the two groups. Conclusion: The application of local vibration using a massage gun for five minutes on the triceps surae could improve its flexibility as much as the application of static stretching. A massage gun for the application of a local vibration stimulus may be effective, simple, portable, and comfortable.

• 한국소음진동공학회논문집
• /
• 제21권11호
• /
• pp.991-996
• /
• 2011

This study was carried out vibration attenuation of vibration absorber attached to the cantilever beam structure. Modern tank guns are stabilized to allow fire on the move while traversing uneven terrain. However, as the length of the barrel is extended, to meet required muzzle exit velocities, the terrain induced vibrations lead to increased muzzle pointing errors. Thus, reducing these vibrations should lead to increased accuracy. The vibration absorber includes a compliant energy storage device, such as a spring, and a mass secured to the energy storage device. In this study, it accomplished a research in about gun barrel vibration attenuation using tuned mass damper. The barrel was hung from a bungee cord for free-free condition. It accomplished a vibration experiment for verified attenuation efficiency.

• 한국소음진동공학회논문집
• /
• 제25권9호
• /
• pp.593-598
• /
• 2015

In this paper, the silencer for large caliber gun to reduce the propagation of gun-generated noise was studied. The results of structural analysis and firing test were described. Structural analysis was conducted by using a commercial program, ANSYS, and showed that there was not any structural problem. The sound pressure level was diminished about 10 dB by the silencer adapted in front of the gun and the soundness of the material was verified from the internal pressure measurement. The reduction of weight, improvement of durability and speed-up of actuating device have to be studied later to improve the usability of silencer for large caliber gun.