• The Mathematical Education
• /
• v.56 no.4
• /
• pp.387-405
• /
• 2017

The purpose of this study is to investigate the change of students 'perception and expression about the motion of object following distance function $={x \atop 3}$ and distance function $y=\frac{x^3}{3}+3$ according to the necessity of research on students' perception and expression about integral constant. In this paper, we present the recognition and the expression of the difference of the constant in the relationship between the distance function and the speed function of the students, while examining the process of constructing the speed function and the inverse process of the distance function. This provides implications for the relationship between the derivative and the indefinite integral corresponding to the inverse process. In particular, in a teaching experiment, a constructive activity was performed to analyze the motion of two distance functions, where the student had a difference of the constant term. At this time, the students used the expression 'starting point' for the constants in the distance function, and the motion was interpreted by using the meaning. This can be seen as a unique 'students' mathematics' in the process of analyzing the motion of objects. These scenes, in introducing the notion of the relation between differential and indefinite integral, it is beyond the comprehension of the integral constant as a computational procedure, so that the learner can understand the meaning of the integral constant in relation to the motion of the object. It is expected that it will be a meaningful basic research on the relationship between differential and integral.

• The Journal of Information Technology
• /
• v.7 no.3
• /
• pp.37-45
• /
• 2004

The representative communication method which is applied in the low-speed power line communication modem with 60bps is single carrier method. It has been used mainly for the control. The single carrier method is very sensitive to a power line communication channel environment. Specially, the severe attenuation of the transmission signal according to the notch characteristics of channel becomes the main cause of communication error. Domestic power line channel environment has this notable feature. In this paper, we implemented the low-speed power line communication system which used the chirp signal method to be strong in notch and noise characteristics. In this research, we proposed the method which transmits 1- '1 Unit symbol Chirp signal' with a 100${\mu}s$ time within 1ms for 1 bit. Also it applied for the Convolution code for an error correction and the Manchester code for a collision perception and an error detection. It used the method which uses the bit correlator for signal detection in the receiver parts. We confirmed that the communication method of the chirp method has a excellent performance compared to single carrier methods with a result of experiment of the low-speed power line communication system with the 60bps.

• School Mathematics
• /
• v.19 no.4
• /
• pp.639-661
• /
• 2017

The purpose of this study is to investigate the relationship between the distance function average speed and the speed function. Particularly, in this study, we investigate the process of constructing the speed function in the distance function (irrational function, exponential function) which is difficult to weaken the argument in the denominator. In this process, students showed various anxieties and expressions about the procedural knowledge that they constructed first. In particular, if student B can not explain all the knowledge he already knows in this process, he showed his reflection on the process of calculating the differential coefficient. This study adds an understanding of the calculation method of students in differential coefficient learning. In addition, it is meaningful that the students who construct procedural knowledge at the time of calculating the differential coefficient have thought about how to provide opportunities to reflect on the procedure they constructed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.4
• /
• pp.271-282
• /
• 2021

This study aims to understand the opening efficiency of the finless porpoise escape guide net by the type of extension net that is the part to which the escape guide net is attached in stow net. To this end, extension nets were manufactured in full size and the net mouth area and towing tension were investigated according to the towing speed (0.2, 0.4, 0.6 and 0.8 m/s) and the type of extension net (25 mm net and raschel net) in the water tank. As a result, the net mouth area of the guide net was larger when the raschel net was used for the extension net than when the 25 mm net was used under all towing speeds. In addition, regardless of the type of extension net, the net mouth area reached about 80% of the maximum value at a towing speed of 0.4 m/s. In the field, fishing operation of stow net is performed only when the current speed is above 0.4 m/s. Therefore, the speed of 0.4 m/s was confirmed as a meaningful value to determine whether it is possible to operate. As a result of analyzing the relationship between the net mouth area of the guide net and the towing tension, it was confirmed that the difference in the net mouth area of the guide net according to the type of the extension net was due to the difference in the solidity ratio.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.469-478
• /
• 2019

Purpose: In this studies we examine the facilities damage characteristics caused by forest fire. Therefore, we surveyed damaged facilities from forest fire which was occurred on Goseong-Gun on march 28 in 2019.(damaged areas was 40ha) The types of facilities uses were house, public facility, warehouse and so on. 17 facilities were destroyed. The purpose of this study was to for establishing a disaster safety village in rural areas where damage from a similar type of disaster occurs repeatedly by conducting the consciousness survey targeting at experts and disaster safety officials in a local government. Method: We surveyed meteorological factors(temperature, wind speed, wind direction, humidity) per a minute for analyzing weather condition on Goseong-Gun when forest fire was occurred, spread and extinguished. And we surveyed forest fire risk factors(a slope degree, a slope direction, a geographical feature, a distance between forest and facility, main species, the existence of crown fire ignition, the direction of facility, the main material of building) around 10 damaged facilities. Finally, we analyzed damage pattern of facilities using meteorological factor and forest fire reisk fator Result: The weather condition of Kanseonng AWS (No.517) was high temperature, arid and strong wind, when the forest fire was occurred and spread. An average wind speed was 4.1m/s and the maximum wind speed was 11.6m/s. The main direction of wind was W(225~315°). Damaged facilities were located on the steep slope area and on the mountaintop. The forest density around facilities was high and main species was korean red pine. The crown fire was occurred in the forest around damaged facilities. The average distance was 13.5m from forest to facilities. When the main matarial of building was made by fire resistance materials (for example, rainforced concrete), the damage was slightly. on the other hand, when by flammable material (for example, a Sandwich Panel), the facilities were totally destroyed Conclusion: The results of this research which were the thinning around house, making a safety distance, the improvement of main material of building and etc, will be helpful for establishing a counter measure for a forest fire prevention of facilities in wild land urban interface

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1342-1351
• /
• 2011

Nowadays rolling stock has become a fast and convenient transportation and increased in its demands. But the improvement of speed has result in increase of aerodynamic noise and therefore residential districts near by the railroad are now constantly suffering from the racket. Thus the study regarding rolling stock's environmental noise measurement and appraisal has become important. The case of environmental noise, there are no changes of tone so prediction can be made by reducing areas around the railway. This is part of the study which estimates the noise around the railway using scaled model, and the source of the noise has been researched on. The scaled model of rolling stock will have to be able to make high frequency and it needs to be spread out in a short amount of time. When popping a balloon or firing a gun fits its condition and this study analyzed the characteristics of these two different noises. Measurement was held on a wide vacant lot and the reflection effect of the ground is additionally examined. It is judged to be used in the future when predicting the environmental noise of railway vehicles.

• ETRI Journal
• /
• v.29 no.3
• /
• pp.363-370
• /
• 2007

In this paper, we propose a flexible turbo decoding algorithm for a high order modulation scheme that uses a standard half-rate turbo decoder designed for binary quadrature phase-shift keying (B/QPSK) modulation. A transformation applied to the incoming I-channel and Q-channel symbols allows the use of an off-the-shelf B/QPSK turbo decoder without any modifications. Iterative codes such as turbo codes process the received symbols recursively to improve performance. As the number of iterations increases, the execution time and power consumption also increase. The proposed algorithm reduces the latency and power consumption by combination of the radix-4, dual-path processing, parallel decoding, and early-stop algorithms. We implement the proposed scheme on a field-programmable gate array and compare its decoding speed with that of a conventional decoder. The results show that the proposed flexible decoding algorithm is 6.4 times faster than the conventional scheme.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.549-552
• /
• 2004

The thesis describes the design of 12bit digital-to-analog converter (DAC) which shows the conversion rate of 500MHz and the power supply of 3.3V with 0.35${\mu}m$ CMOS 1-poly 4-metal process for advanced wireless transceiver of high speed and high resolution. The proposed DAC employes segmented structure which consists of 6bit MSB, 3bit mSB, 3bit LSB for area efficiency Also, using a optimized aspect ratio of process and new triple diagonal symmetric centroid sequence for high yield and high linearity. The proposed 12bit current mode DAC was employs new deglitch circuit for the decrement of the glitch energy. Simulation results show the conversion rate of 500MHz, and the power dissipation of 85mW at single 3.3V supply voltage. Both DNL and INL are found to be smaller than ${\pm}0.65LSB/{\pm}0.8LSB$.

• Advanced Composite Materials
• /
• v.18 no.4
• /
• pp.395-413
• /
• 2009

Impact tests on high-strength membrane materials under biaxial loads were experimentally conducted in order to evaluate influence of biaxial loads on impact fracture of the membrane materials for the inflated applications. Cruciform specimens of the membrane materials were fabricated for applying biaxial loadings during the impact test. A steel ball was shot using a compressed nitrogen gas gun, and struck the membrane specimen. Impact tests on uniaxial strip specimens were also conducted to obtain the effect of specimen configuration and boundary condition on the impact fracture. The results of the measured crack length and the ultra-high speed photographs indicate the impact fracture properties of the membrane fabrics under biaxial loadings. Crack length due to the impact increased with applied tensile load, and the impact damages of the cruciform membrane materials under biaxial loadings were smaller than those of under uniaxial loadings. Impact fracture of the strip specimen was more severe than that of the cruciform specimen due to the difference of boundary conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.152-152
• /
• 2009

We investigate micro-tip properties as Ni-Co plating and CMP processes for MEMS probe card and units. The micro-tip are fabricated by using Ni-Co plating machine, lapping machine, and chemo-mechanical polisher. In order to get high conductive and reliable micro-tip, we control Co contents and thickness by CMP speed. We have found that about 20-25% of Co contents are required and have to lapping speed of 30 rpm. Also, we investigate photolithography and Ni-Co plating processes conditions for the one-step and the three-step micro-tips.