• 교육시설
• /
• 제17권1호
• /
• pp.21-29
• /
• 2010

This study is the purpose of plan principle establishment of the class room for individualization, oriented information of education and various teaching, learning activity. Since the 1990's, school facilities also need to change the educational environment. The 1990's is the time to prepare for the change such as individualization, an information-oriented society, the world-oriented society. Open education is the new form of school and needs the change that individualization diversification, oriented information. For above the reasons, in order to satisfy the demand of change of the new educational environment deviating from uniform education of the past environment improvement of both school education and studying facilities is the emergency theme. The process of education of Korea studies the character that before modem times after modem times under the Japanese rule. The process of change of act in relation to education process and facilities of Korea arranges and studies after establishing government. The plan principle synthesize and analyses school building refering to plan standard and principle of books of various architecture plan, is general classroom in the educational process of the elementary schools.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.167-169
• /
• 2016

이 논문은 라인 터널링과 포인트 터널링을 모두 고려한 포켓 터널링 전계효과 트랜지스터의 여러가지 구조 및 물질 파라미터에 따른 시뮬레이션 결과를 소개한다. 포켓의 도핑 농도와 두께가 증가할수록 구동전류 $I_{on}$이 증가하고 포켓의 두께와 게이트 절연체의 유전율이 증가할수록 SS(subthreshold swing)가 좋아짐을 보인다. hump 효과는 SS를 나쁘게 하기 때문에 최소화할 수 있도록 최적의 구조를 만들어야 한다.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.153-168
• /
• 2003

It is very important to arrange the artificial teeth correctly in bucco-lingual (labio- lingual) relation in reconstrcting dentition. Although many anatomic landmarks and techniques have been reported over the years, they are based on westerns. So this study was performd to examine the horizontal relations of mandibular teeth in Korean dentulous adults. 200 volunteers(mean age 22.9) who had natural dentition were selected. The impressions were taken with irreversible hydrocolloid impression material and mandibular study models were fabricated using class I dental stone. Then they were measured with 3-dimensional measuring device specially designed for this study. The results were as follows ; It is better to consider the lingual cusps of the lower posterior teeth as a guide than the linguoaxial surfaces of the lower posterior teeth, arranging the lower posterior teeth buccally to the line which starts from the mesial aspect of the lower canine and continue backward to the lingual aspect of the retromolar pad. It is better to arrange the fossae of the lower posterior teeth buccally to the line which starts from the cusp tip of the lower canine and continue backward to the top of the retromolar pad. The positions of the lower posterior teeth in the denture-bearing area ; considering the fossa as a guide, the 2nd premolar was positioned in center. considering the buccal cusp as a guide, the 1st molar and the 2nd molar were positioned in center. the distance ratio(d/a) was incresed constantly from the lower canine to the 2nd molar d ; the distance between the buccal vestibule(the lowest point) and the buccal cusp tips of the lower posterior teeth. a ; the distance between the buccal vestibule(the lowest point) and the lingual vestibule(the lowest point). The lower canine was positioned lingually($0.11{\pm}0.13$) than the labial vestibule, and the central incisor and the lateral incisor were positioned almost in the imaginary perpendicular plane of the labial vestibule(the lowest point).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.792-795
• /
• 2005

The guide-ways of precision machine tools are one of important element of machine tools. It has usually a pair of surfaces for constraint of one direction with bearing. In the case of precision machine tools, non-contact bearing such as hydrostatic bearing and aerostatic bearing is adopted usually. In this case, profiles of rails has effect on straightness and the clearance of bearing has effect on stiffness of guide way, which changes to higher if clearance changes to smaller. The clearance is varied along moving table according to relative distance of pair of rails. The relative distance of pair of rail can be divided by three properties. First and second properties are straightness of each pair of rail and bearing pad. And, third is parallelism about pair of rails and pairs of bearing pad. There are several methods for measuring straightness of each surface such as reversal method, sequential two point method, and way straightness. These straightness measuring methods are always acquiring deviation of profile from eliminating linear fitted inclined line and don't have the information of parallelism. Therefore, to get the small clearance for high stiffness, the straightness of rail and bearing pad and parallelism about pair of rails and pair of bearing pads are measured for correction such as regrinding, reassembling and lapping. In this research, new and easy method for measuring parallelism of pair of rails is suggested. Two displacement probe and sensor stage, which is carry on the displacement sensor, are needed. The simulation and experiment was accomplished about pair of horizontal guide way to confirm the measurement of parallelism. And, the third probe is added to measure the straightness of each rails by sequential two point method. From the estimation of combined these two methods, it is confirmed that the profiles of a pairs of rails can be measured.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.958-964
• /
• 2001

It is difficult to apply a conventional selection guide for diffusers when the diffuser is installed in a perimeter zone, because the ADPI(Air Diffusion Performance Index) vs. T/L(Throw/Length) curve listed in conventional guide does not consider the perimetric heating load. The objective of this study is to evaluate the effect of the perimetric heating load on the ADPI and to propose a selection guide for proper diffuser when perimetric heating load exists. The velocity and temperature distributions and the ADPI value are obtained numerically with various heat load ratios and air flow rates. The ADPI values by numerical result were compared with existing experimental data to verify the method for evaluation of ADPI proposed in present study. In case of a high side wall diffuser, the ADPI decreased with increases of the flow rate on every heat load ratio of present study except 0.75. Also, the ADPI vs. T/L curves have been proposed for the heat load ratios of 0.25, 0.5, 0.75 to guarantee comport thermal environment when diffusers are installed in perimeter zone.

• 한방안이비인후피부과학회지
• /
• 제25권2호
• /
• pp.38-48
• /
• 2012

Background : The atopic dermatitis patient and their families are looking for safer herb-medicine treatments that possess therapeutic effects, but without the recurrence of symptoms and long-term harmful consequences that can result from other treatment. However, for many reasons, including methodological difficulties and lack of high quality study like randomized clinical study and systematic review, there are no consistent clinical guide line for atopic dermatitis in Traditional Korean Medicine. Objectives : Evidence-based clinical practice guidelines support clinical decision-making by making recommendations to guide clinical practice. The purpose of this study was to develop Traditional Korean Medicine clinical practice guideline for atopic dermatitis Result : The future guide should be based on scientific evidence and include the followings: (1) diagnosis of atopic dermatitis (2) the pattern identification of atopic dermatitis (3) classification of Sasang Constitution (4) efficacy assessment (5) treatment guideline (6) education for patients and care givers Conclusion : The development of Traditional Korean Medicine clinical practice guideline for atopic dermatitis is needed.

• 한국정밀공학회지
• /
• 제24권11호
• /
• pp.66-75
• /
• 2007

To prevent an insulator failure, an automatic cleaning and inspection robot was developed for suspension insulator strings. The robot autonomously moves along the insulator string using the clamps installed on its two moving frames. Especially, unlike the existing cleaning robots using jets of water, the robot system adopts a dry cleaning method using rotating brushes and a circular motion guide. In addition, a mechanized brush bristles and a voltage-balancing contactor are devised to increase cleaning efficiency and to prevent arc generation under live-line conditions, respectively. We confirmed its effectiveness through experiments.

• 조명전기설비학회논문지
• /
• 제20권9호
• /
• pp.61-69
• /
• 2006

The tensile strength of an overhead transmission line's conductor in response to an aging is being assessed in this paper. It is our view that, the decrement in the conductor's tensile strength is a key index that can be used to determine a conductor's end of life and a current limits. This paper describes a probabilistic method of assessing this index for main transmission lines which are responsible for the north bound power flow in the Seoul metropolitan area. Such an assessment can be a useful guide for economic system operation.

• 대한전기학회논문지
• /
• 제41권4호
• /
• pp.339-345
• /
• 1992

Estimates of maximum amplitudes of conductor galloping are needed in order to determine appropriate phase-to-phase clearances on the overhead lines. One approach to obtaining these estimates is through the use of mathematical models of conductor galloping. Unfortunately, the models that consider both vertical conductor motion (Den Hartog type) and torsional conductor motion are often too complex for practical use. However, the estimates of maximum amplitude obtained from galloping models that assume only vertical (Den Hartog type) conductor motion tend to be too conservative. This paper presents the DF method to obtain the estimates of the amplitude and the frequency of galloping limit cycle, along with the wind pressure at which they occur, from a nonlinear dynamic model that considers both Den Hartog type and torsional conductor motion. From these results, the useful data for the line design guide and further insight into the mechanism of the conductor galloping are obtained.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제15권4호
• /
• pp.329-337
• /
• 1993

Improvement of orthognathic surgical techniques make it possible to design esthetic surgical correction for total esthetic face. In order to find the esthetic line which guide esthetic surgical correction in patients of orthognathic surgery, cephalometric soft tissue analysis of esthetic faces were performed. In esthetic Korean young adults, 25 males and 25 females who were within 1 S.D. of E-line, ANB, P/A facial height ratio, were analyzed in natural position keeping their face eye level. 1. Sn position is constant in males and females. The Sn-N'-N' Vertical plane angle is $5.3^{\circ}$ in both sexes. Sn is positioned in front of 5 mm in female 7 mm in male from the N' vertical plane. 2. The Sn-Ls line make constant angle to horizontal plane with $72.5^{\circ}$ in both sexes, which is called "upper esthetic line". The Ls-Pg' line makes constant angle to $72.4^{\circ}$ (range $72.2^{\circ}$ in female to $72.6^{\circ}$ in male), which is called "lower esthetic line". 3. When inter-esthetic line angle (the Sn-Ls line to Ls-Pg' line) has $144.9^{\circ}$, lower third face has esthetic upper and lower lip. 4. In treatment planning, Sn is first corrected in proper position, and then upper and lower esthetic line are established with the angle of 144.9. The maxilla is moved to tangent Ls to the upper esthetic line, and mandible is moved to tangent Li and Pg' to the lower esthetic line, according to the "y"-shaped esthetic lines, then lower third face showes esthetics.