• 대한전기학회논문지
• /
• 제40권7호
• /
• pp.670-674
• /
• 1991

This paper presents the material properties of LPCVD silicon films formed using Si2H6 gas at various deposition temperatures. To study the structural properties depending on the deposition temperature, XRD, EBD and TEM analyses were used. The maximum grain size in this experiment was obtained at the deposition temperature of 485ø C. It is discussed that LPCVD films formed below the deposition temperature of 485ø C are promising for low temperature TFT applications. The enhancement of the film characteristics results from the reduction of grain boundary density. We also observed that the film properties of Si2H6 at 600ø C was quite different from those of Si H4 at 600ø C. It has shown that the grain structure from a TEM analysis was elliptical and not dependent on the deposition temperature.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.185-188
• /
• 2001

In this study, $Al_2$O$_3$films have been deposited with Atomic Layer Deposition(ALD) for gate insulator for MPTMA and $H_2O$ at low temperature below 40$0^{\circ}C$ . Conventional methods of $Al_2$O$_3$thin film deposition have suffered from the poor step coverage due to reduction of device dimension and increasing contact/via hole aspect ratio. ALD is a self-limiting growth process with controlled surface reaction where the growth rate is only dependent on the number of growth cycle and the lattice parameter of materials. ALD growth process has many advantages including accurate thickness control, large area and large batch capability, good uniformity, and pinholes freeness.

• Journal of Electrochemical Science and Technology
• /
• 제10권3호
• /
• pp.329-334
• /
• 2019

Sn-Cu alloy powders were prepared via a simple chemical reduction method for the negative electrode materials in lithiumion batteries. The addition of Cu can suppress the growth of Sn particles during synthetic process. Furthermore, the Cu also acts as a matrix phase against the volume change during cycling. With increasing amount of the Cu, a stable $Cu_6Sn_5$ phase formed in the Sn-Cu alloy and its cycle performance greatly enhanced depending on the Cu content. To promote the generation of the $Cu_6Sn_5$ phase, the synthesis temperature is raised to $60-100^{\circ}C$ from the ambient temperature. The Sn-Cu alloy powders prepared at elevated temperatures showed remarkable cycle performances. The Sn-Cu alloy powder obtained at $60^{\circ}C$ exhibited a significantly high volumetric capacity of over 2,000 mAh/cc at the 50th cycle.

• 생물환경조절학회지
• /
• 제11권4호
• /
• pp.163-167
• /
• 2002

겨울철 소나무와 자작나무의 시설양묘시 생육에 필요한 야간 최저온도를 구명하고자 최저온도가 각각 5~8$^{\circ}C$, 10~13$^{\circ}C$및 15~18$^{\circ}C$로 설정된 2중 피복 PE house에서 실시하였다. 설정된 온도체계는 발아 최성기 후 약 8주(4월 6일)정도까지 유지되었으며 그 후에는 자연 온도의 상승으로 야간 온도체계를 유지할 수 없었다. 온도 처리에 따른 발아율의 차이는 없었으나 발아속도는 10여일 늦어졌다. 두 수종 모두 온도 가 낮아짐에 따라 수고생장, 근원경생장 및 건중량이 감소하였다. 특히 발아 8주 후의 지상부 건중량에서 그 영향이 크게 나타난 것으로 조사되었으며, 이러한 결과는 5~8$^{\circ}C$에서의 가장 낮은 T/R율을 유도하였다. 한편 상대적으로 낮은 온도처리에 대한 수고생장 반응은 자작나무가 보다 민감한 것으로 관찰되었다. 일반적으로 겨울철 임업 시설양묘시 설정되는 생육 최저온도의 범위는 수종에 따라 다르지만, 본 실험의 결과를 고려할 때 15$^{\circ}C$이상은 설정되어야만 우리나라에서 겨울철 시설양묘시 정상적인 묘목의 생육이 가능하리라 판단된다.

• 한국생산제조학회지
• /
• 제9권3호
• /
• pp.136-142
• /
• 2000

With the significant growth of the number of vehicles environmental problems is raised. NOx SOx, and PM emissions in diesel powered vehicles are larger than that in gasoline because the development of pollutants reduction techniques has not been yet achieved. So it is need to develop after-tratment or to convert into alternative fuel to satisfy emission regula-tion. Among the after-treatment systems to reduce the diesel emissions studies with diesel oxidation catalyst(DOC) are done greatly. In this study using DOC reduction efficiency with the change of temperature and catalyst loading was calculated through measurements of CO, HC, PM. and SOX.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.145-151
• /
• 2006

Nickel and nickel-tungsten alloy were electroplated on a cold rolled and heat treated copper(Cu) substrate. 4 mm-thick high purity commercial grade Cu was rolled to various thicknesses of 50, 70, 100 and 150 micron. High reduction ratio of 30% was applied down to 150 micron. Rolled texture was converted into cube texture via high temperature heat treatment at $400-800^{\circ}C$. Grain size of Cu was about 50 micron which is much smaller compared to >300 micron for the Cu prepared using smaller reduction pass of 5%. 1.5 km-long 150 micron Cu was fabricated with a rolling speed of 33 m/min and texture of Cu was uniform along length. Abnormal grain growth and non-cube texture appeared for the specimen anneal above $900^{\circ}C$. 1-10 micron thick Ni and Ni-W film was electroplated onto an annealed cube-textured Cu or directly on a cold rolled Cu. Both specimens were annealed and the degree of texture was measured. For electroplating of Ni on annealed Cu, Ni layer duplicated the cube-texture of Cu substrate and the FWHM of in plane XRD measurement for annealed Cu layer and electroplated layer was $9.9^{\circ}\;and\;13.4^{\irc}$, respectively. But the FWHM of in plane XRD measurement of the specimen which electroplated Ni directly on cold rolled Cu was $8.6^{\circ}$, which is better texture than that of nickel electroplated on annealed Cu and it might be caused by the suppression of secondary recrystallization and abnormal grain growth of Cu at high temperature above $900^{\circ}C$ by electroplated nickel.

• KSBB Journal
• /
• 제24권1호
• /
• pp.96-100
• /
• 2009

본 연구에서는 저온에서의 재조합 단백질 생산성 향상을 위하여 저온에서 RNA 샤페론 활성을 지닌다고 알려진 CspA 단백질의 발현이 서로 다른 온도에서 대장균의 성장 및 GFP의 발현 속도에 어떻게 영향을 미치는지를 살펴보았다. $20^{\circ}C$, $25^{\circ}C$, $37^{\circ}C$에서는 세포 성장 및 GFP의 생산이 CspA의 발현에 영향을 받지 않았으나, $15^{\circ}C$에서는 GFP의 총 생산성이 CspA의 동시 발현에 의해 향상되었으며 이는 세포 성장 속도의 향상에 기인함을 확인하였다. 결론적으로 CspA의 발현은 $15^{\circ}C$에서 세포 당 재조합 단백질 생산량의 증가에는 영향을 미치지 않으나, 즉 재조합 단백질의 번역 효율에는 큰 영향을 미치지 않으나, 대장균 성장 속도에 영향을 미치며, 이를 통해 재조합 단백질의 총 생산량 향상을 유도 할 수 있을 것으로 기대된다.

• 한국토양비료학회지
• /
• 제15권4호
• /
• pp.221-225
• /
• 1982

작물시험장(作物試驗場) 춘천출장소(春川出場所) 냉수시험답(冷水試驗畓)에서 최고분얼기(最高分蘖期)부터 출수기(出穗期)까지 냉수(冷水)($16^{\circ}C$) 유입구(流人口)로부터 거리별(距離別) 수온 및 지온의 변화양상(變化樣相)을 측정(測定)하고 이에 따른 수도생육(水稻生育) 및 수량변화 관계를 농백(農白)과 밀양(密陽)23호(號)에 대하여 조사(調査)하였다. 관개수(灌漑水)의 이동거리(移動距離)가 증가됨에 따라 수온은 급격(急激)히 상승(上昇)되어 $21^{\circ}C$에 접근(接近)하는 양상(樣相)을 보였으나 지온은 직선적(直線的)으로 완만(緩慢)하게 증가되어 수온보다 $1{\sim}2^{\circ}C$ 낮은 수준(水準)으로 유지(維持)되었다. 수온과 토양온도가 낮으면 간장(稈長) 및 이삭의 추출도(抽出度)가 줄어들고 출수(出穗)가 지연(遲延)되며 수량구성요소는 주당수수, 천입중(千粒重) 및 임실률 떨어져 감수되는 것으로 나타났다. 품종간(品種間) 저수온에 대한 반응은 뚜렷한 차이(差異)를 보여 농백(農白)은 $17^{\circ}C$에서 수량을 기대(期待)할 수 없었고 $17{\sim}20^{\circ}C$사이에서는 생식생장(生殖生長)이 가능(可能)하여 수량을 낼 수 있었으며 $21^{\circ}C$에서는 정상적(正常的)인 생육(生育)과 수량성을 보였다. 그러나 밀양(密陽)23호(號)는 $19^{\circ}C$에서도 정상적(正常的)인 생식생장(生殖生長)이 이루어지지 못하여 수량을 기대(期待) 할 수 없었다.

• 한국결정성장학회지
• /
• 제23권4호
• /
• pp.195-200
• /
• 2013

고상반응법으로 Ba-Y-Si-계 산질화물 황색 형광체를 합성하였고, 형광체의 발광특성에 미치는 고상반응온도, 환원 열처리 온도 및 $Eu^{2+}$ 활성제 농도의 영향에 대하여 조사하였다. 고상반응온도 $1400^{\circ}C$, 환원 열처리 온도 $1300^{\circ}C$가 최적화된 온도조건으로 조사되었다. 450 nm 파장의 여기 광원에 대하여 합성된 $Ba_9Y_{2+y}Si_6O_{24-3y}N_{3y}:Eu^{2+}$ 형광체는 571~585 nm 영역의 중심파장을 갖는 단일 발광밴드 특성을 나타내었다. 활성제 $Eu^{2+}$ 농도가 3 mol%일 때 가장 강한 발광강도가 얻어졌으며, 5 mol% 이상의 농도에서는 농도소광현상이 관찰되었다. FE-SEM 및 PSA 분석 결과 합성된 형광체는 약 $8.2{\mu}m$의 평균 입경을 갖는 것으로 확인되었다.

• 한국환경과학회지
• /
• 제18권10호
• /
• pp.1171-1179
• /
• 2009

The solitary ascidian, Halocynthia aurantium, which is commonly called the sea peach because of its coloration and general shape, is a valuable organism of benthic marine population in the northern region of the East Sea, Korea. It is seldom found at a depth of less than 10 meters and the sea peach is frequently observed in large populations between 20 and 100 meters. It appears to prefer attachment to vertical rocks faces and artificial cement blocks exposed to the currents. Mass mortality and reduction of resources in sea peach, H. aurantium, were occurred in the benthic area of the northern region of the East Sea because of the rapid fluctuation of environmental factors such as temperature and salinity due to mass rainfall in summer and going up north of a strong warm current in winter. Therefore, we examined the effects of temperature and salinity on embryonic development of fertilized eggs, tadpole larva to metamorphosis, and attachment to siphon development. Laboratory-raised larvae were studied using a two-factorial experimental design with four levels of temperature(8, 12, 16 and $20^{\circ}C$) and four levels of salinity(20, 25, 30 and 34 psu). The ascidian larvae of H. aurantium survived environmental conditions between temperature of $8{\sim}20^{\circ}C$ and salinity of 25~34 psu and exhibited positive growth at $8{\sim}16^{\circ}C$ and 30~34 psu. Fertilized eggs have not developed at lower salinity of 20 psu irrespective of temperature range tested and have showed an abnormal development at the salinity of 25 psu between higher temperatures of 20 and $24^{\circ}C$. This result suggests that temperature increase and salinity reduction depending on environmental fluctuation may have significant impacts on population variation of H. aurantium in the northern region of the East Sea.