• Journal of the Korean Ceramic Society
• /
• v.49 no.5
• /
• pp.454-460
• /
• 2012

The nano-sized zirconia powders were synthesized in an impregnation method using pulp and $ZrOCl_2{\cdot}8H_2O$ as an initial material. The synthesized powders were characterized by XRD and FE-SEM. The particle size of the powder was controlled by preparation conditions, such as drying temperature and time. As a result of the various drying and calcination conditions, 30~50 nm sized homogeneous zirconia particles were obtained at $800^{\circ}C$ for 1 h. Crystallization and the rapid growth of particles were accelerated with increasing calcination temperature and time. Tetragonal phase generated below $800^{\circ}C$ were transferred to monoclinic phase with increasing calcination temperature and time. Moreover, above $800^{\circ}C$, heat treatment time had very large influence on the particle growth, and the change of drying condition also had large influence on the growth of a crystal.

• BMB Reports
• /
• v.36 no.3
• /
• pp.282-287
• /
• 2003

The production of superoxide dismutase (SOD) varied in Deinococcus radiophilus, the UV resistant bacterium, depending upon different phases of growth, UV irradiation, and superoxide treatment. A gradual increase in total SOD activity occurred up to the stationary phases. The electrophoretic resolution of the SOD in cell extracts of D. radiophilus at each growth phase revealed the occurrence of MnSOD throughout the growth phases. The SOD profiles of D. radiophilus at the exponential phase received oxidative stress by the potassium superoxide treatment or UV irradiation also revealed the occurrence of a single SOD. However, these treatments caused an increase in SOD activity. The data strongly suggest that D. radiophilus has only one species of SOD as a constitutive enzyme, which seems to be a membrane-associated protein.

• Journal of Powder Materials
• /
• v.6 no.3
• /
• pp.246-250
• /
• 1999

The effects of the ${\beta}-Si_3N_4$ starting particle size and $\alpha$/$\beta$ phase transformation during sintering process on the microstructure evolution of Yttrium $\alpha$-Sialon ceramics were investigated. As-received ${\beta}-Si_3N_4$ powder (mean particle size: 0.54$\mu$m) and classified ${\beta}-Si_3N_4$ powder(mean particle size: $0.26\mu{m}$) were used as starting powders. With decreasing the starting particle size, the growth of elongated grains was enhanced, which resulted in the whisker -like microstructure with elongated grains. These results were discussed in relation to the two-dimensional nucleation and growth theory. In the specimen heat treated at $1600^{\circ}C$ for 10h before sintering at $1950^{\circ}C$for 1h under 40atm(2-step sintering), the grain size was smaller than of the 1-step sintering at 195$0^{\circ}C$ for 1h. However, bimodal microstructure evolution were not not remarkable in both sample, which is ascribed to the $\alpha$-phase contents existing in ${\beta}-Si_3N_4$ starting powder.

• Proceedings of the Korean Reliability Society Conference
• /
• 2002.06a
• /
• pp.273-273
• /
• 2002

In this paper, we investigate a software release policy with software reliability growth factor during the warranty period by assuming that the software reliability growth is assumed to occur after the testing phase with probability p and the software reliability growth is not assumed to occur after the testing phase with probability 1-p. The optimal release policy to minimize the expected total software cost is discussed. Numerical examples are shown to illustrate the results of the optimal policy. And we consider a Bayesian decision theoretic approach to determine an optimal software release policy. This approach enables us to update our uncertainty when determining optimal software release time, When the failure time is Weibull distribution with uncertain parameters, a bayesian approach is established. Finally, numerical examples are presented for illustrative propose.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.2
• /
• pp.131-133
• /
• 1994

Deposition of silicon on pretreated sapphire substrates has been investigated by the liquid phase epitaxy method at low temperatures. An average 14 $\mu\textrm{m}$ thickness of silicon was grown over a large area on sapphire substrate originally coated with a much thinner silicon layer $[0.5 \mu\textrm{m} (100) Si/(1102) sapphire]$ at low temperatures from $(380^{\circ}C to 460^{\circ}C)$.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.20-20
• /
• 2002

Based on experimental and theoretical analyses, we suggested a new possibility that the CVD diamond films grow not by the atomic unit but by the charged clusters containing a few hundreds of carbon atoms, which form spontaneously in the gas phase [J. Crysta] Growth 62 (1996) 55]. These hypothetical negatively-charged clusters were experimentally confirmed under a typical hot-filament diamond CVD process. Thin film growth by charged clusters or gas phase colloids of a few nanometers was also confirmed in Si and ZrO₂ CVD and appears to be general in many other CVD processes. Many puzzling phenomena in the CVD process such as selective deposition and nanowire growth could be explained by the deposition behavior of charged clusters. Charged clusters were shown to generate and contribute at least partially to the film deposition by thermal evaporation. Origin of charging at the relatively low temperature was explained by the surface ionization described by Saha-Langmuir equation. The hot surface with a high work function favors positive charging of clusters while that of a low work function favors negative charging.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.178-179
• /
• 2013

After the introduction of the design VE system in 1990s, based on the legal system has made a rapid growth. Also It is evaluated as qualitative growth. Despite this growth, VE effort can cause the occurrence of the risk. In this paper carried out to hindrance factor that decrease the productivity in VE phase for strategy to improve the utilization of basic data.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.579-581
• /
• 2019

In this paper, dispersion-managed optimal link configuration with the growth/decay distribution of accumlative dispersion as the fiber span is increased, in which optical phase conjugator placed at midway, is proposed. It is confirmed that if net residual dispersion set to be -15 ps/nm or 15 ps/nm in the proposed optical link configuration, the best compensation of the distorted wavelength division multiplexed channels will be obtained.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.5 no.1
• /
• pp.37-43
• /
• 1995

The proper choice of the solvent is a prerequisite for solution growth of silicon. In the present work, the temperature to dissolve at least 1 atomic% silicon was calculated in various molten solvents.

• Journal of Animal Science and Technology
• /
• v.61 no.1
• /
• pp.10-17
• /
• 2019

The present study was undertaken to investigate the effects of the plane of nutrition (PN) for growing-finishing pigs on growth performance and meat quality in summer. One hundred and two barrows and 102 gilts weighing approximately 44 kg were placed on a high-, medium-, or low-plane grower diet (HPG, MPG, or LPG) with ME and lysine concentrations ranging from 3.33 to 3.40 Mcal/kg and 0.93% to 1.15%, respectively, for 29 days in 6 replicates (pens) in total. Pigs from each grower pen were divided into two finisher pens and provided with a high-plane finisher diet (HPF) containing 3.40 Mcal ME and 9.5 g lysine/kg and a low-plane finisher diet (LPF; 3.25 Mcal ME and 8 g lysine/kg), respectively, up to approximately 110 kg, and slaughtered. Growth performance of the pigs, including average daily gain (ADG), average daily feed intake (ADFI), and gain:feed ratio, was not influenced by the grower-phase PN during any of the grower phase, a 31-d finisher phase I, and ensuing phase II. However, both the ADG and gain:feed ratio were greater (p < 0.05) for the HPF group than for the LPF group during the finisher phase I (748 vs. 653 g with SEM = 13 g and 0.333 vs. 0.299 with SEM = 0.008, respectively). The ADG, but not gain:feed ratio, was greater for the HPF group vs. LPF during the finisher phase II (673 vs. 623 g with SEM = 15 g for ADG and 0.322 vs. 0.323 with SEM = 0.005 for the gain:feed ratio). The carcass backfat thickness (BFT) was greater for the LPF group vs. HPF within the pigs which had been placed on LPG during the grower phase, but not within the pigs from the HPG or MPG group. Physicochemical characteristics of the longissimus dorsi muscle (LM) and sensory quality attributes of fresh and cooked LM were not influenced by either the grower-phase or finisher-phase PN. In conclusion, high PN is necessary for finishing pigs during the hot season to minimize the reduced rate of weight gain and also to prevent the increase of BFT that could result from low PN.