Seo, Yangwoo;Park, Eunshim;Kim, Youngkuk;Lee, Kwanyoung;Kim, Myungsoo
Journal of Applied Reliability
/
v.18
no.3
/
pp.201-207
/
2018
Purpose: To develop the reliability growth planning for a subsystem of guided weapon system using PM2-Continuous model. Methods: The target MTBF of the subsystem is set by allocating the system target MTBF to the lower level, where ARINC method is applied. Other model parameters such as initial MTBF, management strategy ratio and average fix effectiveness factor are chosen from historical growth parameter estimates. Given the values of model parameters, the reliability growth planning curve using PM2-Continuous model is constructed and the sensitivity analyses are performed for the changes of model parameters. Results: We have developed the reliability growth plan for a subsystem of guided weapon system using PM2-Continuous model. It was found that the smaller the ratio of initial MTBF to target MTBF, the smaller the management strategy ratio, the smaller the average fix effectiveness factor, and the shorter the development test period, the higher reliability growth is required. Conclusion: The result of this study will be used as a basis for establishing the reliability growth plan, the test period setting and the budget appropriation for the similar system entering the system development stage in the future.
Chinese cabbage is one of the most important vegetables in Korea and a target crop for market stabilization as well. Remote sensing has long been used as a tool to extract plant growth, cultivated area and yield information for many crops, but little research has been conducted on Chinese cabbage. This study refers to the derivation of simple Chinese cabbage growth prediction equation by using RapidEye derived vegetation index. Daesan-myeon area in Gochang-gun, Jeollabuk-do, Korea is one of main producing district of Chinese cabbage. RapidEye multi-spectral imagery was taken on the Daesan-myeon five times from early September to late October during the Chinese cabbage growing season. Meanwhile, field reflectance spectra and five plant growth parameters, including plant height (P.H.), plant diameter (P.D.), leaf height (L.H.), leaf length (L.L.) and leaf number (L.N.), were measured for about 20 plants (ten plants per plot) for each ground survey. The normalized difference vegetation index (NDVI) for each of the 20 plants was measured using an active plant growth sensor (Crop $Circle^{TM}$) at the same time. The results of correlation analysis between the vegetation indices and Chinese cabbage growth data showed that NDVI was the most suited for monitoring the L.H. (r=0.958~0.978), L.L. (r=0.950~0.971), P.H. (r=0.887~0.982), P.D. (r=0.855~0.932) and L.N. (r=0.718~0.968). Retrieval equations were developed for estimating Chinese cabbage growth parameters using NDVI. These results obtained using the NDVI is effective provided a basis for establishing retrieval algorithm for the biophysical properties of Chinese cabbage. These results will also be useful in determining the RapidEye multi-spectral imagery necessary to estimate parameters of Chinese cabbage.
This study was conducted to estimate the growth curve parameters of 253 heads of F2 population produced by inter-crossing F1 from Korean Native boars and Landrace sows, and to estimate the effects of Leptin receptor gene(LEPR) on their growth characteristics. Growth curve parameters were estimated from nonlinear regression using Gompertz model individually. Average mature weight and average maturing rate estimated were 179.69${\pm}$4.40kg and 0.3103${\pm}$0.0043, respectively. The effect of sex was insignificant for all the parameters estimated from Gempertz model(p〉.05), and the effect of calving group was significant for mature weight and maximum growth rate at inflection point (p〈.05). The effect of LEPR genotype were significant for all the growth curve parameters(p〈.05). According from the results of the least squares means of growth curve parameters by LEPR genotypes, mature weight and point of inflection were highest in genotype AA in which the maturing rate was the lowest, and were lowest in genotype DD in which maturing rate was the highest, reversely.
This study was conducted to figure out how the shape of Hanwoo changes over time, examine the rank correlations between the carcass traits which are the selection traits and parameters of growth curve, and determine the correlation between body shape and carcass. Body weight, body measurements and carcass traits were measured from 161 castrated Hanwoo, and 12 growth traits and 5 carcass traits were investigated in total. The logistic model(Nelder, 1961) used for the estimation of growth curve parameters and growth characteristics at inflection point were calculated by these growth curve parameters. The value of this parameter was greatest for pinbone width, which suggests that it is an early ripening trait, while it was lowest for chest girth, suggesting it to be a late ripening trait. The rank correlations of chest depth, chest width, and hip width with backfat thickness steadily increased from 6 to 24 months, while the rank correlations of other traits decreased after 18 months until 24 months of age. Only phenotypic records were analyzed in this study, but for examine the genetic changes over growth phase in Hanwoo, if another additional genetic analysis like as estimation of genetic parameters should achieve, body measurements may be useful traits in proven bull selection.
This study is to estimate population ecological parameters, including growth parameters, survival rates, instantaneous coefficients of natural and fishing mortalities, and age at first capture, as well as growth rates at age of the hairtail, Trichiurus lepturus Linne in Korean waters. For describing the growth of the hairtail, three growth models were fitted, and the von Bertalanffy growth model was adopted for the purpose of the further stock assessment work. The von Bertalanffy growth parameters estimated from a nonlinear regression using EXCEL Solver were $L_\infty=46.01cm$, K=0.3868, and $t_0=-0.3220$. Annual survival rate (S) of the hairtail was estimated to be 0.277 (variance=0.00035) and the instantaneous coefficient of natural mortality (M) was estimated to be 0.441/year. Instantaneous coefficient of fishing mortality (F) for the recent years was calculated as 0.843/year, implying an impact from fishing about two times greater than that of natural mortality. The age at first capture $(t_c)$ was estimated to be 0.787 years, which is much younger age than $50\%$ mature age. Finally, the growth rates at age were estimated.
Manjula, Prabuddha;Park, Hee-Bok;Seo, Dongwon;Choi, Nuri;Jin, Shil;Ahn, Sung Jin;Heo, Kang Nyeong;Kang, Bo Seok;Lee, Jun-Heon
Asian-Australasian Journal of Animal Sciences
/
v.31
no.1
/
pp.26-31
/
2018
Objective: This study estimated the genetic parameters for body weight gain and growth curve parameter traits in Korean native chicken (KNC). Methods: A total of 585 $F_1$ chickens were used along with 88 of their $F_0$ birds. Body weights were measured every 2 weeks from hatching to 20 weeks of age to measure weight gain at 2-week intervals. For each individual, a logistic growth curve model was fitted to the longitudinal growth dataset to obtain three growth curve parameters (${\alpha}$, asymptotic final body weight; ${\beta}$, inflection point; and ${\gamma}$, constant scale that was proportional to the overall growth rate). Genetic parameters were estimated based on the linear-mixed model using a restricted maximum likelihood method. Results: Heritability estimates of body weight gain traits were low to high (0.057 to 0.458). Heritability estimates for ${\alpha}$, ${\beta}$, and ${\gamma}$ were $0.211{\pm}0.08$, $0.249{\pm}0.09$, and $0.095{\pm}0.06$, respectively. Both genetic and phenotypic correlations between weight gain traits ranged from -0.527 to 0.993. Genetic and phenotypic correlation between the growth curve parameters and weight gain traits ranged from -0.968 to 0.987. Conclusion: Based on the results of this study population, we suggest that the KNC could be used for selective breeding between 6 and 8 weeks of age to enhance the overall genetic improvement of growth traits. After validation of these results in independent studies, these findings will be useful for further optimization of breeding programs for KNC.
Lim, Byung-Ran;Lee, Kisay;Noh, Seung You;Park, Ki Young
Journal of Korean Society on Water Environment
/
v.24
no.3
/
pp.306-310
/
2008
Characteristics of microalgal growth was investigated using anaerobic effluent from two-phase animal waste digestor as substrate. Batch experiments were carried out to investigate the effect of the initial nitrogen and phosphorus concentrations on growth of Microcystis aeruginosa, Chlorella sp. and Euglena gracilis. In 400 times diluted anaerobic effluent (TN 3 mg/L), single cell growth of the Euglena gracilis population increased twice without delay, although Chlorella sp. and Microcystis aerugenos take over 144 hours. Similar appearance with single cell growth was observed in mixed cultures. However, microalgae population did not increase under condition of 10 times diluted influent (TP 3 mg/L) in both pure and mixed cultures, which was affected by high organic and nitrogen concentration. Logistic growth model successfully fitted to determine biokinetic parameters such as ${\lambda}$: lag time, ${\mu}m$: maximal specific growth rate, A: asymptote of growth.
Kim, Yooseok;Song, Wooseok;Lee, Suil;Cha, Myoung-Jun;Park, Chong-Yun
Proceedings of the Korean Vacuum Society Conference
/
2013.02a
/
pp.614-614
/
2013
The effect of graphene growth parameters on the number of graphene layers were systematically studied and growth mechanism on copper substrate was proposed. Parameters that could affect the thickness of graphene growth include the pressure in the system, gas flow rate, growth pressure, growth temperature, and cooling rate. We hypothesis that the partial pressure of both the carbon sources and hydrogen gas in the growth process, which is set by the total pressure and the mole fraction of the feedstock, could be the factor that controls the thickness of the graphene. A synthetic method to produce such large area graphene films with precise thickness from mono- to few-layer would be ideal for chemists and physicists to explore the promising electronic applications of these materials. Here, large-area uniform mono-, bi-, and few-layer graphene films were successfully synthesized on copper surface in selective growth windows, with a finely tuned total pressure and $CH_4$/$H_{2gas}$ ratio. Our findings may facilitate both the large-area synthesis of well-controlled graphene features and wide range of applications of graphene.
Objective: The objective of this study is to investigate the eruption pattern and root resorption of the bovine anterior dentition in relation to growth-related parameters based on dental maturity. Methods: A cross-sectional study was conducted on 110 bovine anterior mandibles by using standard radiography, cone-beam computed tomography (CBCT), and actual measurements. We determined the relationships between the stages of dental maturity by using a modification of Demirjian's method and various growth-related parameters, such as the activity of the root-resorbing tissue and mobility of the deciduous teeth. The correlation of growth-related parameters with interdental spacing and distal unusual root resorption (DRR) of the deciduous fourth incisor was assessed. The cause of mesial unusual root resorption (MRR) of the deciduous fourth incisor was determined on the basis of the arrangement of the permanent third incisor. Results: An independent t-test and chi-square test indicated significant differences in growth-related parameters associated with dental arch length discrepancy and factors related to the shedding of deciduous teeth between the low and high dental maturity groups. The samples with interdental spacing and DRR showed a larger sum of mesiodistal permanent crown widths and higher dental maturity than did the respective controls. Samples with MRR tended to show a lingually rotated distal tip of the adjacent tooth crown. Conclusions: Dental maturity has relevance to the interdental spaces and unusual root resorption of mixed dentition. The position of the adjacent tooth crown on CBCT may be correlated with the occurrence of unusual root resorption of the incisor.
A comparison was made of population of the economically important cockle Anadara (=Scapharca) broughtoni (Bivalvia, Arcidae) inhabiting different areas of the Razdolnaya River estuary at the head of Amurskii Bay (Peter the Great Gulf, East Sea). Also, changes in cockle population density and structure, as well as in cockle growth rates during the last 20 years were studied. In all years of investigation, the morphometrical parameters and growth rates of cockles were smaller at the sites located close to the River mouth than farther down-estuary. The differences can be attributed to higher concentration of suspended particulate matter, decreased salinity and water temperature, as well as a longer exposure to these unfavorable environmental factors at sites located close to the River mouth, compared to farther sites. For two decades, cockle population density had decreased by almost 30 times at some sites in the River estuary. The main reason for this population decline is commercial over-fishing of the cockle. Besides, for the last 20 years, linear parameters of the cockles in the population decreased approximately by 30% and weight parameters, almost two times. Cockle growth rates also decreased for this period. Evidently, these facts are due to the damaging effect of dredging.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.