• Journal of Applied Biological Chemistry
• /
• 제51권4호
• /
• pp.155-159
• /
• 2008

A local isolate of Aspergillus niger was cultivated under optimal growth conditions on wheat bran in solid state fermentation. Filter paperase from fermented bran was separately extracted with different solvents to test the recovery of the enzyme. Among solvents tested, distilled water served as the best leachate, thus the conditions were further optimized with distilled water. After two washes of fermented bran with distilled water for 1.5 h each under stationary conditions at 1 g wheat bran: 5 mL distilled water, the maximum recovery of 13.5 $Ug^{-1}$ of wheat bran was obtained.

• 전기의세계
• /
• 제26권2호
• /
• pp.57-65
• /
• 1977

In roder to investigate the influence of treeing on electric breakdown of solid organic insulator the initiation and growing mechanism of tree itself, and the correlation between corona discharge and treeing phenomena in solid orgainc insulating materials, several experiments were carried out by means of needle test on polymethyl-methacrylate. The obtained results showed that the existence of voids in specimen had important effects on initiation voltage of trees and, when the direct voltage was applied, the initiation voltage of trees increased by space charge effect. And also the stagnation phenomena due to the transfer of vacancy cluster or polymekr cage in specimen might beconsidered in process of growth of trees, and corona discharge seemed to be the pre-phenomena of treeing because trees were normally initiated by internal discharge in voids.

• 대한기계학회논문집B
• /
• 제27권2호
• /
• pp.236-242
• /
• 2003

Thermal bubbles find their diverse application areas in the MEMS (MicroElectroMechanial Systems) technology, including bubble jet printers, microactuators, micropumps, etc.. Especially, microactuators and micropumps, which use a microbubble growing by a controlled heat input, frequently involve mechanical and thermal interaction of the bubble with a solid structure, such as a cantilever beam and a membrane. Although the concept is experimentally verified that an internal pressure of the bubble can build up high enough to deflect a thin solid plate or a beam, the physics of the entire process have not yet been thoroughly explored. This work reports the experimental study of the growth of a thermal bubble while deflecting a thin cantilever beam. A physical model is presented to predict the elastic response of the cantilever beam based on the experimental measurements. The scaling law constructed through this work can provide a design guide for micro- and nano-systems that employ a thermal bubble for their actuation/pumping mechanism.

• Transactions on Electrical and Electronic Materials
• /
• 제9권6호
• /
• pp.227-230
• /
• 2008

Programmable Metallization Cell (PMC) Random Access Memory is based on the electrochemical growth and removal of electrical nanoscale pathways in thin films of solid electrolytes. In this study, we investigated the nature of thin films formed by the photo doping of copper ions into chalcogenide materials for use in programmable metallization cell devices. These devices rely on metal ions transport in the film so produced to create electrically programmable resistance states. The results imply that a Cu-rich phase separates owing to the reaction of Cu with free atoms from chalcogenide materials.

• 상하수도학회지
• /
• 제18권5호
• /
• pp.649-655
• /
• 2004

The behavior of biological particles in DAF (dissolved air flotation) process was analyzed by employing PBT (Population balance theory). After decline growth phase of activated sludge, the value of the initial collision-attachment efficiency was increased over than 0.35 corresponding relatively high value in the whole life cycle of microorganism. For practical application of DAF as a solid separation process. It is desirable that microbial particles should be operated to perform high solid removal efficiency in biological wastewater treatment.

• Journal of Dairy Science and Biotechnology
• /
• 제25권2호
• /
• pp.5-10
• /
• 2007

Ultrasonication was employed to prepare solid lipid nanoparticles (SLN) for smart probiotic nanoparticles as a nanofood. The model probiotic material, lactocin from Lactobacillus plantarum (CBT-LP2), was incorporated into SLN. The CBT-LP2 loaded SLN (CBT-LP2-SLN) were spherical in the photograph of scanning electron microscope (SEM). The particle size measured by laser diffraction (LD) was found to be $97.3{\pm}8.2nm$. Zeta potential analyzer suggested the zeta potential of LP-SLN was $-29.36{\pm}3.68$ mV in distilled water. The entrapment efficiency (EE%) was determined with the sephadex gel chromatogram and high-performance liquid chromatogram (HPLC), and up to 90.59% of nanofood was incorporated. Stability evaluation showed relatively long-term stability with only slight particle growth (P>0.05) after storage at room temperature for 4 weeks. Therefore, ultrasonication is demonstrated to be a simple, available and effective method to prepare high quality SLN loaded probiotic material.

• 한국분말재료학회지
• /
• 제8권4호
• /
• pp.258-267
• /
• 2001

In this work, the conventional transient liquid phase(TLP) bonding was modified. An attempt was made of using a liquid phase sintered alloy, which will be a liquid phase coexisting with a solid phase at the bonding temperature, as an interlayer for bonding metals. With an aim of revealing the fundamental features of this modified TLP bonding, the kinetics concerned with the growth of solid particles and the isothermal solidification process in Fe-1.16wt%B and Fe-4.5wt%P interlayers for the bonding pure iron, as well as the morphological change of the solid particle, were investigated.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.423-429
• /
• 1990

YBa2Cu3Ox ceramics superconductors fabricated using solid state reaction usually contain second phases, such as BaCuO2 and CuO. These second phases are located long the grain boundaries and enhance the abnormal growth of YBa2Cu3Ox grains and, consequently, generate the microcracks. These second phaases were reduced by adding Y2BaCuO5 into solid state reacted YBa2Cu3Ox ceramics. Y2BaCuO5 reacts with grain boundary second phases and reduces the grian size of the ceramics. It was observed the critical current density was improved by adding Y2BaCuO5 into solid state reacted YBa2Cu3Ox ceramic superconductor.

• 한국결정성장학회지
• /
• 제18권1호
• /
• pp.10-14
• /
• 2008

GaN nanowires는 수평 VPE법으로 합성 되었다. 본 실험에서는 source와 기판과의 거리가 합성된 GaN nanowires의 형상에 미치는 영향에 대하여 실험하였다. GaN nanowires는 $950^{\circ}C$ 온도에서 Ar 과 $NH_3$ 가스가 각각 1000, 50 sccm 의 유량에서 합성되었다. 합성된 GaN nanowires의 단면형태는 삼각형의 모양을 가졌으며, GaN nanowires의 길이는 200에서 500 nm 정도 였다. 합성된 GaN nanowires의 모양은 FESEM 으로 확인하였고, XRD 분석을 통하여 그 구조가 wurzite 구조인 것을 확인하였다. 또한, HRTEM 사진과 SAED 패턴을 통하여 합성된 GaN nanowires의 표면과 구조를 분석하였다. 성장된 GaN nanowires의 광학적 특성은 PL분석을 통하여 이루어졌다.

• 한국결정성장학회지
• /
• 제19권4호
• /
• pp.184-189
• /
• 2009

$Ni(NO_3)_2{\cdot}6H_2O$를 원료로 하여 고온에서 열처리함으로써 얻어진 NiO 나노 결정의 성장거동에 대하여 고찰하였다. 성장된 결정의 상은 정 8면체의 구조를 갖고 있었으며, 200${\sim}$500 nm 크기로 성장하였다. $900^{\circ}C$에서 2시간 동안 열처리하였을 때, $600^{\circ}C$ 이하의 열처리 온도에서 나타나지 않았던 (110)과 (100) facet이 생성되는 것을 관찰할 수 있었다 또한 $900^{\circ}C$ 열처리에서는, $600^{\circ}C$ 이하의 온도에서 열처리 한 시료보다 크기가 작은 결정상이 neck을 형성하면서 성장하였음을 관찰하였다.