• 한국결정성장학회지
• /
• 제11권1호
• /
• pp.14-19
• /
• 2001

NaX 제올라이트의 결정화 과정 중 온도에 따른 결정 크기를 측정하였다. 이때 선형결정성장속도 상수는 80, 90, 100$^{\circ}C$에 대해서 각각 0.0441$\mu\textrm{m}$/h, 0.0595$\mu\textrm{m}$/h 그리고 0.0972$\mu\textrm{m}$/h로 얻어졌다. 반응온도와 선형결정성장율 사이의 관계를 이용하여 활성화에너지는 43.243 kJ/mol 로 계산되었다. 결정화 반응의 종료는 각각 $80^{\circ}C$에서 20일 90$^{\circ}C$에서 16일, 100$^{\circ}C$에서 9일로 각각 나타났다. 반응온도의 증가에 따라서 최종생성물 결정크기는 감소할 뿐만 아니라 결정화 시간도 역시 감소하였다.

• Journal of Welding and Joining
• /
• 제20권5호
• /
• pp.78-86
• /
• 2002

A metallurgical model for the prediction of prior austenite grain size considering the dissolution kinetics of M$_3$C precipitates at the heat affected zone of SA508-cl.3 was proposed. The isothermal kinetics of grain growth and dissolution were respectively described by well-known equation, $dD/dT=M({\Delta}F_{eff})^M$ and Whelan's analytical model. The isothermal grain growth experiments were carried out for measure the kinetic parameters of grain growth. The precipitates of the base metal and the specimens exposed to thermal cycle were examined by TEM-carbon extraction replica method. The model was assessed by the comparison of BUE simulation experiments and showed good consistencies. However, there was no difference between the model considering and ignoring $M_3C$ precipitates. It seems considered that pinning force exerted by $M_3C$ Precipitates was lower than driving force for grain growth due to large size and small fraction of precipitates, and mobility of grain boundary was low in the lower temperature range.

• Food Science and Biotechnology
• /
• 제27권6호
• /
• pp.1865-1869
• /
• 2018

This study examined the effects of alfalfa seed germination on growth of Salmonella enterica. We investigated the population changes of S. enterica during early sprout development. We found that the population density of S. enterica, which was inoculated on alfalfa seeds was increased during sprout development under all experimental temperatures, whereas a significant reduction was observed when S. enterica was inoculated on fully germinated sprouts. To establish a model for predicting S. enterica growth during alfalfa sprout development, the kinetic growth data under isothermal conditions were collected and evaluated based on Baranyi model as a primary model for growth data. To elucidate the influence of temperature on S. enterica growth rates, three secondary models were compared and found that the Arrhenius-type model was more suitable than others. We believe that our model can be utilized to predict S. enterica behavior in alfalfa sprout and to conduct microbial risk assessments.

• 한국균학회지
• /
• 제27권4호통권91호
• /
• pp.304-311
• /
• 1999

영지버섯의 세포외 다당발효중 동력학적 특성을 기질(포도당, 전분), 기질농도$(1{\sim}7%)$ 및 계대배양(3회)의 함수로서 조사하였다. 영지버섯 균사체 증식은 logistic 모델이 Monod 모델 및 two- thirds power 모델과 비교하여 실험값에 잘 일치하였고, 기질 및 생성물은 Luedeking-Pirt 식에 의하여 잘 설명되었다. 또 다당 생성의 발효 기작은 증식연동형과 비증식 연동형이 함께 존재하는 혼합형이었으나 기질에 상관없이 비증식연동형 기작이 더 중요하였다. Glucose는 농도 증가에 따라 다당생성 및 기질소비의 기작이 증식연동형이 감소하고 비증식연동형이 증가하는 경향을 보였다. 그러나 starch를 사용하였을 경우는 glucose와는 달리, 기질소비의 증식연동형과 비증식연동형 기작이 모두 증가하여 높은 기질 이용성을 보였다. 아울러 starch배지에서는 glucose배지에서 보다 비증식속도의 증가와 계대배양시의 안정성을 보였다. 따라서 영지버섯의 배양시 starch배지는 비증식연동형에 의한 균체 생육 및 다당생성의 생합성 촉진에 의해 이들 생산성 및 계대배양시의 안정성을 증가시키는 것으로 생각되었다 최대의 균사체 생육 및 다당 생산은 각각 9.463 및 10.410 g/l로, 7% starch을 함유한 배지에서 $30^{\circ}C$로 7일간 진탕배양하였을 때 얻어졌다.

• 대한환경공학회지
• /
• 제29권7호
• /
• pp.839-845
• /
• 2007

용해성 glucose를 기질로 하여 혐기성 산발효조에서 동역학정수에 대한 온도의존성을 검토하였다. 온도범위는 $15^{\circ}C$에서 $30^{\circ}C$이며, 포화정수$(K_s\upsilon)$와 증식수율(Y)은 온도의 상승에 따라 감소하였지만, 최대비기질소비속도$(\upsilon_{max})$는 증가하였다. 기질소비속도와 균체 증식속도의 온도보정인자$(Q_{10})$ 값은 각각 1.3에서 2.2, 1.5에서 2.2의 범위를 보였다. 최대비기질소비속도$(\upsilon_{max})$가 증식수율(Y) 보다 온도의 변화에 대하여 더 민감하였다. $20^{\circ}C$에서 $30^{\circ}C$까지의 온도영역에서 체류시간과 기질농도의 관계에 대한 시물레이션 모델은 $1/SRT={(6.53){\cdot}(1.038)^{T-20}{\cdot}(S/X)}/{(1.38){\cdot}(0.983)^{T-20}+(S/X)}$이다.

• Food Science and Biotechnology
• /
• 제15권5호
• /
• pp.664-671
• /
• 2006

Modeling the growth kinetics of lactic acid bacteria (LAB), one of the most valuable microbial groups in the food industry, has been actively pursued in order to understand, control, and optimize the relevant fermentation processes. Most modeling approaches have focused on the development of single population models. Primary single population models provide fundamental kinetic information on the proliferation of a primary LAB species, the effects of biological factors on cell inhibition, and the metabolic reactions associated with cell growth. Secondary single population models can evaluate the dependence of primary model parameters, such as the maximum specific growth rate of LAB, on the initial external environmental conditions. This review elucidates some of the most important single population models that are conveniently applicable to the LAB fermentation analyses. Also, a well-defined mixed population model is presented as a valuable tool for assessing potential microbial interactions during fermentation with multiple LAB species.

• Preventive Nutrition and Food Science
• /
• 제16권4호
• /
• pp.364-369
• /
• 2011

Levels of carbon dioxide gas, a metabolite of microbial growth, have been reported to parallel the onset of microbial spoilage and may be used as a convenient index for a packaged food's shelf life. This study aimed to establish a kinetic model of $CO_2$ production from perishable food for the potential use for shelf life control in the food supply chain. Aerobic bacterial count and package $CO_2$ concentration were measured during the storage of seasoned pork meat at four temperatures (0, 5, 10 and $15^{\circ}C$), and their interrelationship was investigated to establish a mathematical model. The microbial growth at constant temperature was described by using model of Baranyi and Roberts. $CO_2$ production from the stored food could be explained by taking care of its yield and maintenance factors linked to the microbial growth. By establishing the temperature dependence of the microbial growth and $CO_2$ yield factor, $CO_2$ partial pressure or concentration in package headspace could be estimated to a limited extent, which is helpful for controlling the shelf life under constant and dynamic temperature conditions. Application and efficacy of the model needs to be improved with further refinement in the model.

• 한국물환경학회지
• /
• 제33권4호
• /
• pp.441-448
• /
• 2017

Microcystis aeruginosa (M. aeruginosa) is a cyanobacterium species that can form harmful algal blooms in freshwater bodies worldwide. The use of Artemisia asiatica extracts to control M. aeruginosa inhibition will be environmentally friendly and promising. Artemisia asiatica extracts removed successfully upto 88% of M. aeruginosa pH 8 at $25^{\circ}C$ of temperature. These results was indicated that the amount of 2.24 g/L Artemisia asiatica extracts was removed 1g dryweight/L of M. aeruginosa. The kinetic data showed substrate inhibition kinetics and maximum growth rate was obtained when the M. aeruginosa was grown in medium containing 2.5 g/L of initial concentration of Artemisia asiatica extracts. In the various growth control models, Luong model showed the highest correlation coefficient of 0.9916. Therefore, the Luong model was the most suitable control model for the growth control of M. aruginosa using Artemisia asiatica extracts. In conclusion, the growth control of M. aruginosa using Artemisia asiatica extracts can be applied in the field without controlling the temperature and pH of rivers and streams, and it is possible to control the growth of M. aruginosa efficiently in a short time. The natural extract, Artemisia asiatica extracts, can be a promising inhibition due to its high efficiency and low dose requirements.

• Environmental Engineering Research
• /
• 제10권6호
• /
• pp.283-293
• /
• 2005

Characteristics of sulfur-based autotrophic denitrification in a semi-continuous type reactor and the kinetic parameters were studied. Enriched autotrophic denitrifying culture was used for the reactor operation. Biomass growth on sulfur particles and in the liquid medium was monitored using the DAPI staining method. From the result of ion concentration changes and the biomass growth, maximum specific growth rate, ${\mu}_{max}$, and the half velocity constant, $K_M$, were estimated as $0.61\;d^{-1}$ and 3.66 mg/L, respectively. Growth yield coefficient, Y values for electron acceptor and donor were found as 0.49 gVSS/g N and 0.16 gVSS/g S. The biomass showed specific denitrification rate, ranging 0.86-1.13 gN/g VSS-d. A half-order equation was found to best simulate the denitrification process in the packed bed reactor operated in the semi-continuous mode.

• Journal of Welding and Joining
• /
• 제20권1호
• /
• pp.97-102
• /
• 2002

The growth kinetics of intermetallic compound layers formed between the eutectic Sn-3.5Ag solder and the Cu and Ni/Cu pad by solid stateisothermal aging were examined. The interfacial reaction between the eutectic Sn-3.5Ag solder and the Cu and Ni/Cu pad was investigated at 70, 120, 150, $170^{\circ}C$ for various times. The intermetallic compound layer was composed of two phase: $Cu_6Sn_5$(${\varepsilon}-phase$) adjacent to the solder and $Cu_6Sn_5$(${\varepsilon}-phase$) adjacent to the copper and on solder/Ni pad the intermetallic compound layer was $Ni_3Sn_4$. Because the values of time exponent(n) have approximately 0.5, the layer growth of the intermetallic compound was mainly controlled by volume diffusion over the temperature range studied. The apparent activation energy for layer growth of total Cu-Sn($Cu_6Sn_5 + Cu_6Sn$), $Cu_6Sn_5$, $Cu_3Sn$ and $Ni_3Sn_4$ intermetallic compound were 64.82kJ/mol, 48.53kJ/mol, 89.06kJ/mol and 71.08kJ/mol, respectively.